On Fri, 24 May 2019 21:28:02 -0300 Renato Lui Geh <renatogeh@xxxxxxxxx> wrote: > Hi Jonathan, Alex, > > Thanks for the review. Some comments inline. > > Thanks, > Renato > > On 05/20, Ardelean, Alexandru wrote: > >On Sun, 2019-05-19 at 12:32 +0100, Jonathan Cameron wrote: > >> [External] > >> > >> > >> On Sat, 18 May 2019 19:41:12 -0300 > >> Renato Lui Geh <renatogeh@xxxxxxxxx> wrote: > >> > >> > This patch adds a YAML binding for the Analog Devices AD7780/1 and > >> > AD7170/1 analog-to-digital converters. > >> > > >> > Signed-off-by: Renato Lui Geh <renatogeh@xxxxxxxxx> > >> > >> One comment inline. I'll also be needing an ack from Analog on this, > >> preferably Michael's. > >> > >> Thanks, > >> > >> Jonathan > >> > --- > >> > .../bindings/iio/adc/adi,ad7780.txt | 48 ----------- > >> > .../bindings/iio/adc/adi,ad7780.yaml | 85 +++++++++++++++++++ > > > >You should also update the MAINTAINERS file. > >Maybe in a following patch. > >It looks like there is not entry in there, so maybe you need to add a new > >one. > > > >Something like: > > > > > >ANALOG DEVICES INC AD7780 DRIVER > >M: Michael Hennerich <Michael.Hennerich@xxxxxxxxxx> > >M: Renato Lui Geh <renatogeh@xxxxxxxxx> > >L: linux-iio@xxxxxxxxxxxxxxx > >W: http://ez.analog.com/community/linux-device-drivers > >S: Supported > >F: drivers/iio/adc/ad7780.c > >F: Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > > >This should be after this block > >ANALOG DEVICES INC AD7768-1 DRIVER > > > >Note that I added you as a co-maintainer. > >If you want, you do not need to add that line. > > > >> > 2 files changed, 85 insertions(+), 48 deletions(-) > >> > delete mode 100644 > >> > Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > >> > create mode 100644 > >> > Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > >> > > >> > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > >> > b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > >> > deleted file mode 100644 > >> > index 440e52555349..000000000000 > >> > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > >> > +++ /dev/null > >> > @@ -1,48 +0,0 @@ > >> > -* Analog Devices AD7170/AD7171/AD7780/AD7781 > >> > - > >> > -Data sheets: > >> > - > >> > -- AD7170: > >> > - * > >> > https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf > >> > -- AD7171: > >> > - * > >> > https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf > >> > -- AD7780: > >> > - * > >> > https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf > >> > -- AD7781: > >> > - * > >> > https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf > >> > - > >> > -Required properties: > >> > - > >> > -- compatible: should be one of > >> > - * "adi,ad7170" > >> > - * "adi,ad7171" > >> > - * "adi,ad7780" > >> > - * "adi,ad7781" > >> > -- reg: spi chip select number for the device > >> > -- vref-supply: the regulator supply for the ADC reference voltage > >> > - > >> > -Optional properties: > >> > - > >> > -- powerdown-gpios: must be the device tree identifier of the PDRST > >> > pin. If > >> > - specified, it will be asserted during driver probe. > >> > As the > >> > - line is active high, it should be marked > >> > GPIO_ACTIVE_HIGH. > >> > -- adi,gain-gpios: must be the device tree identifier of the GAIN > >> > pin. Only for > >> > - the ad778x chips. If specified, it will be asserted > >> > during > >> > - driver probe. As the line is active low, it should be > >> > marked > >> > - GPIO_ACTIVE_LOW. > >> > -- adi,filter-gpios: must be the device tree identifier of the FILTER > >> > pin. Only > >> > - for the ad778x chips. If specified, it will be > >> > asserted > >> > - during driver probe. As the line is active low, it > >> > should be > >> > - marked GPIO_ACTIVE_LOW. > >> > - > >> > -Example: > >> > - > >> > -adc@0 { > >> > - compatible = "adi,ad7780"; > >> > - reg = <0>; > >> > - vref-supply = <&vdd_supply> > >> > - > >> > - powerdown-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; > >> > - adi,gain-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; > >> > - adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>; > >> > -}; > >> > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > >> > b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > >> > new file mode 100644 > >> > index 000000000000..931bc4f8ec04 > >> > --- /dev/null > >> > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > >> > @@ -0,0 +1,85 @@ > >> > +# SPDX-License-Identifier: GPL-2.0 > >> > +%YAML 1.2 > >> > +--- > >> > +$id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml# > >> > +$schema: http://devicetree.org/meta-schemas/core.yaml# > >> > + > >> > +title: Analog Devices AD7170/AD7171/AD7780/AD7781 analog to digital > >> > converters > >> > + > >> > +maintainers: > >> > + - Michael Hennerich <michael.hennerich@xxxxxxxxxx> > >> > + > >> > +description: | > >> > + The ad7780 is a sigma-delta analog to digital converter. This driver > >> > provides > >> > + reading voltage values and status bits from both the ad778x and > >> > ad717x series. > >> > + Its interface also allows writing on the FILTER and GAIN GPIO pins > >> > on the > >> > + ad778x. > >> > + > >> > + Specifications on the converters can be found at: > >> > + AD7170: > >> > + > >> > https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf > >> > + AD7171: > >> > + > >> > https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf > >> > + AD7780: > >> > + > >> > https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf > >> > + AD7781: > >> > + > >> > https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf > >> > + > >> > +properties: > >> > + compatible: > >> > + enum: > >> > + - adi,ad7170 > >> > + - adi,ad7171 > >> > + - adi,ad7780 > >> > + - adi,ad7781 > >> > + > >> > + reg: > >> > + description: > >> > + Chip select number for the device > > > >No need to add a description. > >This is pretty standard. > > > >> > + maxItems: 1 > >> > + > >> > + vref-supply: > >> > + description: > >> > + The regulator supply for the ADC reference voltage > >> > + maxItems: 1 > >> > + > > > >As I see in the driver, it's not vref-supply, it's avdd-supply. > > You're absolutely right. Shouldn't have mindlessly copied > from the txt, even though the txt's was also my fault. > > By the way, a quick look at ad7170 and ad7780's datasheets > shows that the 7170 uses VDD, and the 7780, AVDD. Are they > equivalent? > > > >> > + powerdown-gpios: > >> > + description: > >> > + Must be the device tree identifier of the PDRST pin. If > >> > + specified, it will be asserted during driver probe. As the > >> > + line is active high, it should be marked GPIO_ACTIVE_HIGH. > >> > + maxItems: 1 > >> > + > >> > + adi,gain-gpios: > >> > + description: > >> > + Must be the device tree identifier of the GAIN pin. Only for > >> > + the ad778x chips. If specified, it will be asserted during > >> > + driver probe. As the line is active low, it should be marked > >> > + GPIO_ACTIVE_LOW. > >> > + maxItems: 1 > >> > + > >> > + adi,filter-gpios: > >> > + description: > >> > + Must be the device tree identifier of the FILTER pin. Only > >> > + for the ad778x chips. If specified, it will be asserted > >> > + during driver probe. As the line is active low, it should be > >> > + marked GPIO_ACTIVE_LOW. > >> > + maxItems: 1 > >> > + > >> > +required: > >> > + - compatible > >> > + - reg > >> > + - vref-supply > >> > >> Is that actually true? I'd imagine it'll use a stub regulator if > >> it isn't supplied. > > > >Hmm, I also think this can be omitted as required. > >devm_regulator_get() is used. > >devm_regulator_get_exclusive() would be needed to make this required. > > I see. So the difference between devm_regulator_get and > devm_regulator_get_optional is that the former uses a stub > when the requested reg isn't supplied, and the latter > doesn't? Correct. If you 'require' a regulator you actually have to use the optional form and then check if you got one. Otherwise you get a stub and only find out later that you can't read it's current value. Jonathan > > > >> > >> > + > >> > +examples: > >> > + - | > >> > + #include <dt-bindings/gpio/gpio.h> > >> > + adc@0 { > > > >The adc@0 block should be included in a spi block. > > > >So, something like > > > >spi0 { > > adc@0 { > > compatible = "adi,ad7780"; > > reg = <0>; > > avdd-supply = <&vdd_supply> > > > > powerdown-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; > > adi,gain-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; > > adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>; > > }; > >}; > > > >I know this wasn't the case before, but it should be (from what I recall). > > > >> > + compatible = "adi,ad7780"; > >> > + reg = <0>; > >> > + vref-supply = <&vdd_supply>; > >> > + > >> > + powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; > >> > + adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; > >> > + adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; > > > >Rest looks good. > > > >Thanks > >Alex > > > >> > + }; > >> > >> _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
