On Sun, 2019-05-19 at 12:32 +0100, Jonathan Cameron wrote: > [External] > > > On Sat, 18 May 2019 19:41:12 -0300 > Renato Lui Geh <renatogeh@xxxxxxxxx> wrote: > > > This patch adds a YAML binding for the Analog Devices AD7780/1 and > > AD7170/1 analog-to-digital converters. > > > > Signed-off-by: Renato Lui Geh <renatogeh@xxxxxxxxx> > > One comment inline. I'll also be needing an ack from Analog on this, > preferably Michael's. > > Thanks, > > Jonathan > > --- > > .../bindings/iio/adc/adi,ad7780.txt | 48 ----------- > > .../bindings/iio/adc/adi,ad7780.yaml | 85 +++++++++++++++++++ You should also update the MAINTAINERS file. Maybe in a following patch. It looks like there is not entry in there, so maybe you need to add a new one. Something like: ANALOG DEVICES INC AD7780 DRIVER M: Michael Hennerich <Michael.Hennerich@xxxxxxxxxx> M: Renato Lui Geh <renatogeh@xxxxxxxxx> L: linux-iio@xxxxxxxxxxxxxxx W: http://ez.analog.com/community/linux-device-drivers S: Supported F: drivers/iio/adc/ad7780.c F: Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml This should be after this block ANALOG DEVICES INC AD7768-1 DRIVER Note that I added you as a co-maintainer. If you want, you do not need to add that line. > > 2 files changed, 85 insertions(+), 48 deletions(-) > > delete mode 100644 > > Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > > create mode 100644 > > Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > > b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > > deleted file mode 100644 > > index 440e52555349..000000000000 > > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > > +++ /dev/null > > @@ -1,48 +0,0 @@ > > -* Analog Devices AD7170/AD7171/AD7780/AD7781 > > - > > -Data sheets: > > - > > -- AD7170: > > - * > > https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf > > -- AD7171: > > - * > > https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf > > -- AD7780: > > - * > > https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf > > -- AD7781: > > - * > > https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf > > - > > -Required properties: > > - > > -- compatible: should be one of > > - * "adi,ad7170" > > - * "adi,ad7171" > > - * "adi,ad7780" > > - * "adi,ad7781" > > -- reg: spi chip select number for the device > > -- vref-supply: the regulator supply for the ADC reference voltage > > - > > -Optional properties: > > - > > -- powerdown-gpios: must be the device tree identifier of the PDRST > > pin. If > > - specified, it will be asserted during driver probe. > > As the > > - line is active high, it should be marked > > GPIO_ACTIVE_HIGH. > > -- adi,gain-gpios: must be the device tree identifier of the GAIN > > pin. Only for > > - the ad778x chips. If specified, it will be asserted > > during > > - driver probe. As the line is active low, it should be > > marked > > - GPIO_ACTIVE_LOW. > > -- adi,filter-gpios: must be the device tree identifier of the FILTER > > pin. Only > > - for the ad778x chips. If specified, it will be > > asserted > > - during driver probe. As the line is active low, it > > should be > > - marked GPIO_ACTIVE_LOW. > > - > > -Example: > > - > > -adc@0 { > > - compatible = "adi,ad7780"; > > - reg = <0>; > > - vref-supply = <&vdd_supply> > > - > > - powerdown-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; > > - adi,gain-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; > > - adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>; > > -}; > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > new file mode 100644 > > index 000000000000..931bc4f8ec04 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > @@ -0,0 +1,85 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Analog Devices AD7170/AD7171/AD7780/AD7781 analog to digital > > converters > > + > > +maintainers: > > + - Michael Hennerich <michael.hennerich@xxxxxxxxxx> > > + > > +description: | > > + The ad7780 is a sigma-delta analog to digital converter. This driver > > provides > > + reading voltage values and status bits from both the ad778x and > > ad717x series. > > + Its interface also allows writing on the FILTER and GAIN GPIO pins > > on the > > + ad778x. > > + > > + Specifications on the converters can be found at: > > + AD7170: > > + > > https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf > > + AD7171: > > + > > https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf > > + AD7780: > > + > > https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf > > + AD7781: > > + > > https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf > > + > > +properties: > > + compatible: > > + enum: > > + - adi,ad7170 > > + - adi,ad7171 > > + - adi,ad7780 > > + - adi,ad7781 > > + > > + reg: > > + description: > > + Chip select number for the device No need to add a description. This is pretty standard. > > + maxItems: 1 > > + > > + vref-supply: > > + description: > > + The regulator supply for the ADC reference voltage > > + maxItems: 1 > > + As I see in the driver, it's not vref-supply, it's avdd-supply. > > + powerdown-gpios: > > + description: > > + Must be the device tree identifier of the PDRST pin. If > > + specified, it will be asserted during driver probe. As the > > + line is active high, it should be marked GPIO_ACTIVE_HIGH. > > + maxItems: 1 > > + > > + adi,gain-gpios: > > + description: > > + Must be the device tree identifier of the GAIN pin. Only for > > + the ad778x chips. If specified, it will be asserted during > > + driver probe. As the line is active low, it should be marked > > + GPIO_ACTIVE_LOW. > > + maxItems: 1 > > + > > + adi,filter-gpios: > > + description: > > + Must be the device tree identifier of the FILTER pin. Only > > + for the ad778x chips. If specified, it will be asserted > > + during driver probe. As the line is active low, it should be > > + marked GPIO_ACTIVE_LOW. > > + maxItems: 1 > > + > > +required: > > + - compatible > > + - reg > > + - vref-supply > > Is that actually true? I'd imagine it'll use a stub regulator if > it isn't supplied. Hmm, I also think this can be omitted as required. devm_regulator_get() is used. devm_regulator_get_exclusive() would be needed to make this required. > > > + > > +examples: > > + - | > > + #include <dt-bindings/gpio/gpio.h> > > + adc@0 { The adc@0 block should be included in a spi block. So, something like spi0 { adc@0 { compatible = "adi,ad7780"; reg = <0>; avdd-supply = <&vdd_supply> powerdown-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; adi,gain-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; }; I know this wasn't the case before, but it should be (from what I recall). > > + compatible = "adi,ad7780"; > > + reg = <0>; > > + vref-supply = <&vdd_supply>; > > + > > + powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; > > + adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; > > + adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; Rest looks good. Thanks Alex > > + }; > > _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
