Re: [PATCH v4 0/9] staging: iio: ad7780: move out of staging

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Alexandru,

Thanks for the review. Some questions inline.

Thanks,
Renato

On 03/01, Ardelean, Alexandru wrote:
On Thu, 2019-02-28 at 11:23 -0300, Renato Lui Geh wrote:


The patch-series is a bit big.
I guess that the intent is to move this out-of-staging, but various patches
are holding this in it's place.
For patch series above a certain size, you could get many re-spins
[V2,3,4... so on].

You could send some of the changes as individual patches, or group them in
series of 1,2 or 3 patches. That way, you "parallelize" patch sending, and
when you get reviews on each patch, you can re-spin them individually.
You'll find over time that certain patches get accepted on V1, others on V2
and some on V7 [ hopefully, there isn't any frustration at that point ].

On these subseries, should versioning follow this patchset (v5) or should
they start anew (v1), ignoring this series version?

Well, this is a technique I use to distribute some of my upstream-patch-
work, so that I can switch easier between internal-work & upstreaming-work.

Coming back to this patch-series.
My general input, is that the patches are fine over-all; some are just
cosmetics/noise/a-different-way-of-doing-things-for-this-driver, and those
usually can be left to preference [of the maintainer usually].

I do suggest to not hurry when re-spinning patches, and not change too much
the number of patches in a new series. That can complicate things
sometimes. But, if doing small patch-series or individual patches, you
won't have this problem too much.

Thanks
Alex


This series of patches contains the following:
 - Adds user input for the 'gain' and 'filter' GPIO pins for the ad778x
   family chips;
 - Filter reading for the ad778x;
 - Sets pattern macro values and mask for PATTERN status bits;
 - Adds ID values for the ad7170, ad7171, ad7780 and ad7781 for ID
   status bits checking;
 - Moves regulator initialization to after GPIO init to maintain
   consistency between probe and remove;
 - Copyright edits, adding SPDX identifier and new copyright holder;
 - Moves the ad7780 driver out of staging to the mainline;
 - Adds device tree binding for the ad7780 driver.

Renato Lui Geh (9):
  staging: iio: ad7780: add gain & filter gpio support
  staging: iio: ad7780: add filter reading to ad778x
  staging: iio: ad7780: set pattern values and masks directly
  staging:iio:ad7780: add chip ID values and mask
  staging: iio: ad7780: move regulator to after GPIO init
  staging: iio: ad7780: add SPDX identifier
  staging: iio: ad7780: add new copyright holder
  staging: iio: ad7780: moving ad7780 out of staging
  staging: iio: ad7780: add device tree binding

Changelog:
*v3
 - SPDX and regulator init as patches
 - Renamed filter to odr and ad778x_filter to ad778x_odr_avail
 - Removed unnecessary regulator disabling
 - Removed unnecessary AD_SD_CHANNEL macro
 - Changed unsigned int to unsigned long long to avoid overflow
*v4
 - Split gain & filter patch into two, with the new commit adding only
   filter reading
 - Changed pattern values to direct values, and added pattern mask
 - Added ID values and mask
 - Added new copyright holder
 - Added device tree binding to the ad7780 driver

 .../bindings/iio/adc/adi,ad7780.txt           |  48 +++
 drivers/iio/adc/Kconfig                       |  12 +
 drivers/iio/adc/Makefile                      |   1 +
 drivers/iio/adc/ad7780.c                      | 365 ++++++++++++++++++
 drivers/staging/iio/adc/Kconfig               |  13 -
 drivers/staging/iio/adc/Makefile              |   1 -
 drivers/staging/iio/adc/ad7780.c              | 277 -------------
 7 files changed, 426 insertions(+), 291 deletions(-)
 create mode 100644
Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt
 create mode 100644 drivers/iio/adc/ad7780.c
 delete mode 100644 drivers/staging/iio/adc/ad7780.c

--
2.21.0


--
You received this message because you are subscribed to the Google Groups "Kernel USP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to kernel-usp+unsubscribe@xxxxxxxxxxxxxxxx.
To post to this group, send email to kernel-usp@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/kernel-usp/72a54cd5f58aeb9507b95b7e33ca3d9a38c853e9.camel%40analog.com.
For more options, visit https://groups.google.com/d/optout.
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel



[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux