On Mon, 25 Feb 2019 21:17:31 +0200
Beniamin Bia <beniamin.bia@xxxxxxxxxx> wrote:
> The custom phase and scale attributes were moved to standard iio types.
>
> Signed-off-by: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
> ---
> Changes in v3:
> -abi documentation added
>
> .../testing/sysfs-bus-iio-frequency-ad9834 | 10 ++--
> drivers/staging/iio/frequency/ad9834.c | 53 +++++++++++--------
> 2 files changed, 38 insertions(+), 25 deletions(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9834 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9834
> index b912b49473a3..656aa5b6d22b 100644
> --- a/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9834
> +++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9834
> @@ -1,3 +1,5 @@
> +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_scale
> +
> What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage0_frequency
> KernelVersion: 3.5.0
> Date: April 2012
> @@ -16,7 +18,7 @@ Description:
> value is between 0 and clock frequency / 2.
> Reading returns the value of frequency written in register 1.
>
> -What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage0_phase0
> +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage0_phase
Ah, I see what you are doing here. Much better to just have the final ABI
documented to discuss than doing it in steps.
> KernelVersion: 3.5.0
> Date: April 2012
> Contact: linux-iio@xxxxxxxxxxxxxxx
> @@ -25,7 +27,7 @@ Description:
> is between 0 and 4096 rad.
> Reading returns the value of phase written in register 0.
>
> -What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage0_phase1
> +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage1_phase
> KernelVersion: 3.5.0
> Date: April 2012
> Date: February 2019
> @@ -106,9 +108,9 @@ Description:
> have two registers for frequency and phase but only one
> output. The user can select which one controls the output.
> 0 represents phase 0 which is mapped to
> - out_altvoltage0_phase0
> + out_altvoltage0_phase
> 1 represents phase 1 which is mapped to
> - out_altvoltage0_phase1
> + out_altvoltage1_phase
>
> What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage0_out0_enable
> KernelVersion: 3.5.0
> diff --git a/drivers/staging/iio/frequency/ad9834.c b/drivers/staging/iio/frequency/ad9834.c
> index 8465dac656dd..107d859dadd7 100644
> --- a/drivers/staging/iio/frequency/ad9834.c
> +++ b/drivers/staging/iio/frequency/ad9834.c
> @@ -82,6 +82,7 @@ struct ad9834_state {
> struct mutex lock; /* protect sensor state */
>
> unsigned long frequency[2];
> + unsigned long phase[2];
>
> /*
> * DMA (thus cache coherency maintenance) requires the
> @@ -113,6 +114,8 @@ enum ad9834_supported_device_ids {
> .output = 1, \
> .channel = (chan), \
> .info_mask_separate = BIT(IIO_CHAN_INFO_FREQUENCY) \
> + | BIT(IIO_CHAN_INFO_PHASE),\
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> }
>
> static const struct iio_chan_spec ad9833_channels[] = {
> @@ -170,13 +173,26 @@ static int ad9834_write_frequency(struct ad9834_state *st,
> }
>
> static int ad9834_write_phase(struct ad9834_state *st,
> - unsigned long addr, unsigned long phase)
> + enum ad9834_ch_addr addr,
> + unsigned long phase)
> {
> + int ret;
> +
> if (phase > BIT(AD9834_PHASE_BITS))
> return -EINVAL;
> - st->data = cpu_to_be16(addr | phase);
>
> - return spi_sync(st->spi, &st->msg);
> + if (addr == AD9834_CHANNEL_ADDRESS0)
> + st->data = cpu_to_be16(AD9834_REG_PHASE0 | phase);
> + else
> + st->data = cpu_to_be16(AD9834_REG_PHASE1 | phase);
> +
> + ret = spi_sync(st->spi, &st->msg);
> + if (ret)
> + return ret;
> +
> + st->phase[(int)addr] = phase;
> +
> + return 0;
> }
>
> static int ad9834_read_raw(struct iio_dev *indio_dev,
> @@ -189,6 +205,13 @@ static int ad9834_read_raw(struct iio_dev *indio_dev,
> case IIO_CHAN_INFO_FREQUENCY:
> *val = st->frequency[chan->channel];
> return IIO_VAL_INT;
> + case IIO_CHAN_INFO_PHASE:
> + *val = st->phase[chan->channel];
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_SCALE:
> + /*1 hz */
> + *val = 1;
> + return IIO_VAL_INT;
> }
>
> return -EINVAL;
> @@ -205,6 +228,10 @@ static int ad9834_write_raw(struct iio_dev *indio_dev,
> return ad9834_write_frequency(st,
> (enum ad9834_ch_addr)chan->channel,
> val);
> + case IIO_CHAN_INFO_PHASE:
> + return ad9834_write_phase(st,
> + (enum ad9834_ch_addr)chan->channel,
> + val);
> default:
> return -EINVAL;
> }
> @@ -229,10 +256,6 @@ static ssize_t ad9834_write(struct device *dev,
>
> mutex_lock(&st->lock);
> switch ((u32)this_attr->address) {
> - case AD9834_REG_PHASE0:
> - case AD9834_REG_PHASE1:
> - ret = ad9834_write_phase(st, this_attr->address, val);
> - break;
> case AD9834_OPBITEN:
> if (st->control & AD9834_MODE) {
> ret = -EINVAL; /* AD9843 reserved mode */
> @@ -392,12 +415,8 @@ static IIO_DEVICE_ATTR(out_altvoltage0_out1_wavetype_available, 0444,
> */
>
> static IIO_DEV_ATTR_FREQSYMBOL(0, 0200, NULL, ad9834_write, AD9834_FSEL);
> -static IIO_CONST_ATTR_FREQ_SCALE(0, "1"); /* 1Hz */
>
> -static IIO_DEV_ATTR_PHASE(0, 0, 0200, NULL, ad9834_write, AD9834_REG_PHASE0);
> -static IIO_DEV_ATTR_PHASE(0, 1, 0200, NULL, ad9834_write, AD9834_REG_PHASE1);
> static IIO_DEV_ATTR_PHASESYMBOL(0, 0200, NULL, ad9834_write, AD9834_PSEL);
> -static IIO_CONST_ATTR_PHASE_SCALE(0, "0.0015339808"); /* 2PI/2^12 rad*/
>
> static IIO_DEV_ATTR_PINCONTROL_EN(0, 0200, NULL,
> ad9834_write, AD9834_PIN_SW);
> @@ -408,10 +427,6 @@ static IIO_DEV_ATTR_OUT_WAVETYPE(0, 0, ad9834_store_wavetype, 0);
> static IIO_DEV_ATTR_OUT_WAVETYPE(0, 1, ad9834_store_wavetype, 1);
>
> static struct attribute *ad9834_attributes[] = {
> - &iio_const_attr_out_altvoltage0_frequency_scale.dev_attr.attr,
> - &iio_dev_attr_out_altvoltage0_phase0.dev_attr.attr,
> - &iio_dev_attr_out_altvoltage0_phase1.dev_attr.attr,
> - &iio_const_attr_out_altvoltage0_phase_scale.dev_attr.attr,
> &iio_dev_attr_out_altvoltage0_pincontrol_en.dev_attr.attr,
> &iio_dev_attr_out_altvoltage0_frequencysymbol.dev_attr.attr,
> &iio_dev_attr_out_altvoltage0_phasesymbol.dev_attr.attr,
> @@ -425,10 +440,6 @@ static struct attribute *ad9834_attributes[] = {
> };
>
> static struct attribute *ad9833_attributes[] = {
> - &iio_const_attr_out_altvoltage0_frequency_scale.dev_attr.attr,
> - &iio_dev_attr_out_altvoltage0_phase0.dev_attr.attr,
> - &iio_dev_attr_out_altvoltage0_phase1.dev_attr.attr,
> - &iio_const_attr_out_altvoltage0_phase_scale.dev_attr.attr,
> &iio_dev_attr_out_altvoltage0_frequencysymbol.dev_attr.attr,
> &iio_dev_attr_out_altvoltage0_phasesymbol.dev_attr.attr,
> &iio_dev_attr_out_altvoltage0_out_enable.dev_attr.attr,
> @@ -552,11 +563,11 @@ static int ad9834_probe(struct spi_device *spi)
> if (ret)
> goto error_clock_unprepare;
>
> - ret = ad9834_write_phase(st, AD9834_REG_PHASE0, 512);
> + ret = ad9834_write_phase(st, AD9834_CHANNEL_ADDRESS0, 512);
> if (ret)
> goto error_clock_unprepare;
>
> - ret = ad9834_write_phase(st, AD9834_REG_PHASE1, 1024);
> + ret = ad9834_write_phase(st, AD9834_CHANNEL_ADDRESS1, 1024);
> if (ret)
> goto error_clock_unprepare;
>
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
