Re: [PATCH v2 3/3] staging: mt7621-dts: add pci-phy related bindings to board's device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Dec 24 2018, Sergio Paracuellos wrote:

> New driver for pci phy has been added, as well as. pci driver has been
> changed to use kernel's generic PHY API. Add related PCI PHY bindings
> accordly.
>
> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
> ---
>  drivers/staging/mt7621-dts/mt7621.dtsi | 40 ++++++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
>
> diff --git a/drivers/staging/mt7621-dts/mt7621.dtsi b/drivers/staging/mt7621-dts/mt7621.dtsi
> index 71f069d59ad8..60ddfb7699b0 100644
> --- a/drivers/staging/mt7621-dts/mt7621.dtsi
> +++ b/drivers/staging/mt7621-dts/mt7621.dtsi
> @@ -424,6 +424,10 @@
>  		reset-names = "pcie0", "pcie1", "pcie2";
>  		clocks = <&clkctrl 24 &clkctrl 25 &clkctrl 26>;
>  		clock-names = "pcie0", "pcie1", "pcie2";
> +		phys = <&pcie0_port PHY_TYPE_PCIE>,
> +		       <&pcie1_port PHY_TYPE_PCIE>,
> +		       <&pcie2_port PHY_TYPE_PCIE>;

This doesn't compile - PHY_TYPE_PCIE is unknown.
If I add
#include <dt-bindings/phy/phy.h>

it gets further.


> +		phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
>  
>  		pcie@0,0 {
>  			reg = <0x0000 0 0 0 0>;
> @@ -449,4 +453,40 @@
>  			bus-range = <0x00 0xff>;
>  		};
>  	};
> +
> +	pcie0_phy: pcie-phy@1a149000 {
> +		compatible = "mediatek,mt7621-pci-phy";
> +		reg = <0x1a149000 0x0700>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;

This causes warning
drivers/staging/mt7621-dts/gbpc1.dtb: Warning (ranges_format): /pcie-phy@1a149000:ranges: empty "ranges" property but its #size-cells (0) differs from / (1)
drivers/staging/mt7621-dts/gbpc1.dtb: Warning (ranges_format): /pcie-phy@1a14a000:ranges: empty "ranges" property but its #size-cells (0) differs from / (1)

Whether I leave it as <0>, or change it to <1>, booting results in

[    0.600602] mt7621-pci 1e140000.pcie: Parsing DT failed

I haven't tried to dig into why it fails.

Thanks,
NeilBrown


> +		ranges;
> +		status = "disabled";
> +
> +		pcie0_port: pcie-phy@0 {
> +			reg = <0>;
> +			#phy-cells = <1>;
> +			status = "okay";
> +		};
> +
> +		pcie1_port: pcie-phy@1 {
> +			reg = <1>;
> +			#phy-cells = <1>;
> +			status = "okay";
> +		};
> +	};
> +
> +	pcie1_phy: pcie-phy@1a14a000 {
> +		compatible = "mediatek,mt7621-pci-phy";
> +		reg = <0x1a14a000 0x0700>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		ranges;
> +		status = "disabled";
> +
> +		pcie2_port: pcie-phy@0 {
> +			reg = <0>;
> +			#phy-cells = <1>;
> +			status = "okay";
> +		};
> +	};
>  };
> -- 
> 2.19.1

Attachment: signature.asc
Description: PGP signature

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux