On Sun, Dec 16, 2018 at 9:18 AM Andrew Lunn <andrew@xxxxxxx> wrote:
>
> On Sun, Dec 16, 2018 at 08:57:41AM +0100, Sergio Paracuellos wrote:
> > Add device-tree binding example of the ksz9477 switch managed in i2c mode.
> >
> > Cc: devicetree@xxxxxxxxxxxxxxx
> > Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
> > ---
> > .../devicetree/bindings/net/dsa/ksz.txt | 50 +++++++++++++++++++
> > 1 file changed, 50 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt
> > index 0f407fb371ce..9e715358cebb 100644
> > --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt
> > +++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt
> > @@ -74,3 +74,53 @@ Ethernet switch connected via SPI to the host, CPU port wired to eth0:
> > };
> > };
> > };
> > +
> > +Ethernet switch connected via I2C to the host, CPU port wired to eth0:
> > +
> > + eth0: ethernet@10001000 {
> > + fixed-link {
> > + speed = <1000>;
> > + full-duplex;
> > + };
> > + };
> > +
> > + i2c0: i2c@f8008000 {
> > + ksz9897: ksz9897@0 {
>
> Hi Sergio
>
Hi Andrew,
Thanks for such a fast review :-)
> You should use a generic name here. Plus the @X needs to be the same as the reg value.
> So switch: ksz9897@5f.
Ok, I'll change this. Copy paste is bad friend sometimes.
>
> Andrew
Best regards,
Sergio Paracuellos
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
