On Sun, Dec 16, 2018 at 08:57:40AM +0100, Sergio Paracuellos wrote:
> +static int ksz_i2c_read_reg(struct i2c_client *client, u32 reg, u8 *val,
> + unsigned int len)
> +{
> + struct i2c_adapter *adapter = client->adapter;
> + struct i2c_msg msg[2];
> + u8 txd[2];
Hi Sergio
I'm not sure that having the TX buffer on the stack is safe. If the
i2c bus master is using DMA, you then DMA from the stack, which some
architectures memory models do no allow. You have to use memory which
comes from an alloc function.
> + int ret;
> +
> + txd[0] = (u8)(reg >> 8);
> + txd[1] = (u8)reg;
> +
> + msg[0].addr = client->addr;
> + msg[0].flags = 0;
> + msg[0].len = 2;
> + msg[0].buf = txd;
> +
> + msg[1].addr = client->addr;
> + msg[1].flags = I2C_M_RD;
> + msg[1].len = len;
> + msg[1].buf = val;
You potentially have the same issue with val.
Andrew
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
