On Mon, Nov 19, 2018 at 6:22 AM Ardelean, Alexandru <alexandru.Ardelean@xxxxxxxxxx> wrote: > > On Sun, 2018-11-18 at 02:25 -0200, Matheus Tavares wrote: > > This patch adds the device tree binding documentation for the ad2s90 > > resolver-to-digital converter. > > > > One minor comment inline. > > > Signed-off-by: Matheus Tavares <matheus.bernardino@xxxxxx> > > --- > > Changes in v2: > > - Rewritten 'spi-cpol and spi-cpha' item to say that the device can > > work in either mode (0,0) or (1,1) and explain how they should be > > specified in DT. > > > > .../bindings/iio/resolver/ad2s90.txt | 28 +++++++++++++++++++ > > 1 file changed, 28 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/iio/resolver/ad2s90.txt > > > > diff --git a/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt > > b/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt > > new file mode 100644 > > index 000000000000..594417539938 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/iio/resolver/ad2s90.txt > > @@ -0,0 +1,28 @@ > > +Analog Devices AD2S90 Resolver-to-Digital Converter > > + > > +https://www.analog.com/en/products/ad2s90.html > > + > > +Required properties: > > + - compatible: should be "adi,ad2s90" > > + - reg: SPI chip select number for the device > > + - spi-max-frequency: set maximum clock frequency, must be 830000 > > + - spi-cpol and spi-cpha: > > + Either SPI mode (0,0) or (1,1) must be used, so specify none or > > both of > > + spi-cpha, spi-cpol. > For SPI properties it's a good idea to also reference the document for SPI > bindings. > Something like: > See for more details: > Documentation/devicetree/bindings/spi/spi-bus.txt > Thanks, Alex! I'll add that for v3. Also, can you confirm AD2S90 works in both spi mode 0 and 3? It's not explicitly stated in the datasheet, but that's what it seemed to me and some colleagues. Thanks, Matheus > > + > > +Note about max frequency: > > + Chip's max frequency, as specified in its datasheet, is 2Mhz. But a > > 600ns > > + delay is expected between the application of a logic LO to CS and > > the > > + application of SCLK, as also specified. And since the delay is not > > + implemented in the spi code, to satisfy it, SCLK's period should be > > at most > > + 2 * 600ns, so the max frequency should be 1 / (2 * 6e-7), which > > gives > > + roughly 830000Hz. > > + > > +Example: > > +resolver@0 { > > + compatible = "adi,ad2s90"; > > + reg = <0>; > > + spi-max-frequency = <830000>; > > + spi-cpol; > > + spi-cpha; > > +}; > > -- > You received this message because you are subscribed to the Google Groups "Kernel USP" group. > To unsubscribe from this group and stop receiving emails from it, send an email to kernel-usp+unsubscribe@xxxxxxxxxxxxxxxx. > To post to this group, send email to kernel-usp@xxxxxxxxxxxxxxxx. > To view this discussion on the web visit https://groups.google.com/d/msgid/kernel-usp/563614e00314ba92b9513645a82fde06504a42d5.camel%40analog.com. > For more options, visit https://groups.google.com/d/optout. _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
