Hi Carlos, > Carlos Maiolino <cmaiolino28@xxxxxxxxx> hat am 30. Juli 2018 um 11:57 geschrieben: > > > On Mon, Jul 30, 2018 at 11:49 AM, Stefan Wahren <stefan.wahren@xxxxxxxx> wrote: > > Am 30.07.2018 um 11:43 schrieb Carlos Maiolino: > >> On Mon, Jul 30, 2018 at 11:34 AM, Stefan Wahren <stefan.wahren@xxxxxxxx> wrote: > >>> i think easiest the way would be to get a recent Raspbian Lite ( > >>> https://www.raspberrypi.org/downloads/raspbian/ ), > >>> build the kernel with bcm2835_defconfig, modify config.txt to use the > >>> upstream DTB, add the upstream kernel and DTB to boot partition. > >>> > >>> The following command must be successful: > >>> > >>> vchiq_test -f 1 > >> K, I'll take a look and find a way to test it, I don't have a rPI at > >> the moment to test > >> it, I'll take a look if I can borrow one. in mean time, can it be > >> tested somehow in x86 environment? > > > > I don't see a chance because this driver talks to the VC4 firmware. > > > > kk > > thx i only want to point out that there was a regression (deadlock) in linux-next, which has been reverted [1] / fixed. [1] - https://lkml.org/lkml/2018/8/2/578 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
