[PATCH] Staging: fbtft: fbtft-sysfs: fixed a 80 char line coding style issue Staging: fbtft: flexfb: fixed a 80 char line coding style issue

[sepehrdad.dev@xxxxxxxxx]

From: sepehrdad sh <sepehrdad.dev@xxxxxxxxx>

Fixed multiple coding style issue

Signed-off-by: Sepehrdad Sh <sepehrdad.dev@xxxxxxxxx>
---
 drivers/staging/fbtft/fbtft-sysfs.c |  6 ++++--
 drivers/staging/fbtft/flexfb.c      | 22 +++++++++++++++-------
 2 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/fbtft/fbtft-sysfs.c b/drivers/staging/fbtft/fbtft-sysfs.c
index 712096659aa0..3989b49ce310 100644
--- a/drivers/staging/fbtft/fbtft-sysfs.c
+++ b/drivers/staging/fbtft/fbtft-sysfs.c
@@ -68,7 +68,8 @@ int fbtft_gamma_parse_str(struct fbtft_par *par, u32 *curves,
 			ret = get_next_ulong(&curve_p, &val, " ", 16);
 			if (ret)
 				goto out;
-			curves[curve_counter * par->gamma.num_values + value_counter] = val;
+			curves[curve_counter * par->gamma.num_values
+				+ value_counter] = val;
 			value_counter++;
 		}
 		if (value_counter != par->gamma.num_values) {
@@ -126,7 +127,8 @@ static ssize_t store_gamma_curve(struct device *device,
 
 	mutex_lock(&par->gamma.lock);
 	memcpy(par->gamma.curves, tmp_curves,
-	       par->gamma.num_curves * par->gamma.num_values * sizeof(tmp_curves[0]));
+	       par->gamma.num_curves * par->gamma.num_values
+	       * sizeof(tmp_curves[0]));
 	mutex_unlock(&par->gamma.lock);
 
 	return count;
diff --git a/drivers/staging/fbtft/flexfb.c b/drivers/staging/fbtft/flexfb.c
index f676c9b853f1..5ca42a716e00 100644
--- a/drivers/staging/fbtft/flexfb.c
+++ b/drivers/staging/fbtft/flexfb.c
@@ -667,11 +667,14 @@ static int flexfb_probe_common(struct spi_device *sdev,
 		case 8:
 			par->fbtftops.write_vmem = fbtft_write_vmem16_bus8;
 			if (!par->startbyte)
-				par->fbtftops.verify_gpios = flexfb_verify_gpios_dc;
+				par->fbtftops.verify_gpios = (
+				flexfb_verify_gpios_dc);
 			break;
 		case 9:
 			if (regwidth == 16) {
-				dev_err(dev, "argument 'regwidth': %d is not supported with buswidth=%d and SPI.\n", regwidth, buswidth);
+				dev_err(dev,
+					"argument 'regwidth': %d is not supported with buswidth=%d and SPI.\n",
+					regwidth, buswidth);
 				return -EINVAL;
 			}
 			par->fbtftops.write_register = fbtft_write_reg8_bus9;
@@ -684,8 +687,8 @@ static int flexfb_probe_common(struct spi_device *sdev,
 					"9-bit SPI not available, emulating using 8-bit.\n");
 				/* allocate buffer with room for dc bits */
 				par->extra = devm_kzalloc(par->info->device,
-						par->txbuf.len + (par->txbuf.len / 8) + 8,
-						GFP_KERNEL);
+				par->txbuf.len + (par->txbuf.len / 8) + 8,
+				GFP_KERNEL);
 				if (!par->extra) {
 					ret = -ENOMEM;
 					goto out_release;
@@ -694,7 +697,9 @@ static int flexfb_probe_common(struct spi_device *sdev,
 			}
 			break;
 		default:
-			dev_err(dev, "argument 'buswidth': %d is not supported with SPI.\n", buswidth);
+			dev_err(dev,
+				"argument 'buswidth': %d is not supported with SPI.\n",
+				buswidth);
 			return -EINVAL;
 		}
 	} else {
@@ -707,13 +712,16 @@ static int flexfb_probe_common(struct spi_device *sdev,
 		case 16:
 			par->fbtftops.write_register = fbtft_write_reg16_bus16;
 			if (latched)
-				par->fbtftops.write = fbtft_write_gpio16_wr_latched;
+				par->fbtftops.write = (
+				fbtft_write_gpio16_wr_latched);
 			else
 				par->fbtftops.write = fbtft_write_gpio16_wr;
 			par->fbtftops.write_vmem = fbtft_write_vmem16_bus16;
 			break;
 		default:
-			dev_err(dev, "argument 'buswidth': %d is not supported with parallel.\n", buswidth);
+			dev_err(dev,
+				"argument 'buswidth': %d is not supported with parallel.\n",
+				buswidth);
 			return -EINVAL;
 		}
 	}
-- 
2.18.0

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel