On Sat, 17 Mar 2018 01:36:18 +0530
Himanshu Jha <himanshujha199640@xxxxxxxxx> wrote:
> Rename the macro definitions with suitable names specifying their
> purpose.
>
> * ADIS16201_STARTUP_DELAY_MS: Remove the comment specifying the delay in
> microseconds and rename it with addtition of _MS suffix.
>
> * ADIS16201_MSC_CTRL_ACTIVE_DATA_RDY_HIGH: Rename the macro to make it
> similar to other misc control registers which denotes the data ready
> polarity.
>
> * ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT: Rename to denote it is a
> failure bit.
>
> * ADIS16201_GLOB_CMD_FACTORY_RESET: Remove ambiguous _CAL suffix and add
> _RESET suffix instead to denote factory reset command.
>
> Signed-off-by: Himanshu Jha <himanshujha199640@xxxxxxxxx>
Nicely described and well put together patch.
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.
Thanks,
Jonathan
> ---
> v2:
> -explained every change in the process of renaming macros.
>
> drivers/staging/iio/accel/adis16201.c | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/staging/iio/accel/adis16201.c b/drivers/staging/iio/accel/adis16201.c
> index 0fae8aa..767ebf0 100644
> --- a/drivers/staging/iio/accel/adis16201.c
> +++ b/drivers/staging/iio/accel/adis16201.c
> @@ -20,7 +20,7 @@
> #include <linux/iio/buffer.h>
> #include <linux/iio/imu/adis.h>
>
> -#define ADIS16201_STARTUP_DELAY 220 /* ms */
> +#define ADIS16201_STARTUP_DELAY_MS 220
>
> /* Flash memory write count */
> #define ADIS16201_FLASH_CNT 0x00
> @@ -118,7 +118,7 @@
> #define ADIS16201_MSC_CTRL_DATA_RDY_EN BIT(2)
>
> /* Data-ready polarity: 1 = active high, 0 = active low */
> -#define ADIS16201_MSC_CTRL_ACTIVE_HIGH BIT(1)
> +#define ADIS16201_MSC_CTRL_ACTIVE_DATA_RDY_HIGH BIT(1)
>
> /* Data-ready line selection: 1 = DIO1, 0 = DIO0 */
> #define ADIS16201_MSC_CTRL_DATA_RDY_DIO1 BIT(0)
> @@ -135,7 +135,7 @@
> #define ADIS16201_DIAG_STAT_SPI_FAIL_BIT 3
>
> /* Flash update failure */
> -#define ADIS16201_DIAG_STAT_FLASH_UPT_BIT 2
> +#define ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT 2
>
> /* Power supply above 3.625 V */
> #define ADIS16201_DIAG_STAT_POWER_HIGH_BIT 1
> @@ -146,7 +146,7 @@
> /* GLOB_CMD */
>
> #define ADIS16201_GLOB_CMD_SW_RESET BIT(7)
> -#define ADIS16201_GLOB_CMD_FACTORY_CAL BIT(1)
> +#define ADIS16201_GLOB_CMD_FACTORY_RESET BIT(1)
>
> #define ADIS16201_ERROR_ACTIVE BIT(14)
>
> @@ -290,7 +290,7 @@ static const struct iio_info adis16201_info = {
>
> static const char * const adis16201_status_error_msgs[] = {
> [ADIS16201_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
> - [ADIS16201_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
> + [ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT] = "Flash update failed",
> [ADIS16201_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
> [ADIS16201_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
> };
> @@ -303,11 +303,11 @@ static const struct adis_data adis16201_data = {
>
> .self_test_mask = ADIS16201_MSC_CTRL_SELF_TEST_EN,
> .self_test_no_autoclear = true,
> - .startup_delay = ADIS16201_STARTUP_DELAY,
> + .startup_delay = ADIS16201_STARTUP_DELAY_MS,
>
> .status_error_msgs = adis16201_status_error_msgs,
> .status_error_mask = BIT(ADIS16201_DIAG_STAT_SPI_FAIL_BIT) |
> - BIT(ADIS16201_DIAG_STAT_FLASH_UPT_BIT) |
> + BIT(ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT) |
> BIT(ADIS16201_DIAG_STAT_POWER_HIGH_BIT) |
> BIT(ADIS16201_DIAG_STAT_POWER_LOW_BIT),
> };
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
