On Sat, Sep 02, 2017 at 05:59:14PM +0200, Hans de Goede wrote: > Hi, > > On 02-09-17 16:59, Guenter Roeck wrote: > >On 09/01/2017 02:48 PM, Hans de Goede wrote: > >>Add MUX_USB_* state constant defines, which can be used by USB > >>device/host and Type-C polarity/role/altmode mux drivers and consumers > >>to ensure that they agree on the meaning of the mux_control_select() > >>state argument. > >> > >>Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> > >>--- > >> include/linux/mux/consumer.h | 16 ++++++++++++++++ > >> 1 file changed, 16 insertions(+) > >> > >>diff --git a/include/linux/mux/consumer.h b/include/linux/mux/consumer.h > >>index 912dd48a3a5d..e3ec9b4db962 100644 > >>--- a/include/linux/mux/consumer.h > >>+++ b/include/linux/mux/consumer.h > >>@@ -15,6 +15,22 @@ > >> #include <linux/compiler.h> > >>+/* > >>+ * Mux state values for USB muxes, used for both USB device/host role muxes > >>+ * as well as for Type-C polarity/role/altmode muxes. > >>+ * > >>+ * MUX_USB_POLARITY_INV may be or-ed together with any other mux-state as > >>+ * inverted-polarity (Type-C plugged in upside down) can happen with any > >>+ * other mux-state. > >>+ */ > >>+#define MUX_USB_POLARITY_INV BIT(0) /* Polarity inverted bit */ > >>+#define MUX_USB_NONE (1 << 1) /* Mux open / not connected */ > > > > > >Why BIT(0) but (1 << 1) and so on ? > > Because the polarity can be or-ed together with any of the other options. > Each option can be selected normal and inverted polarity (connector > inserted upside down). > Ah yes, it is (2 << 1), not (1 << 2). But then why don't the options start with (0 << 1) ? I'll have to look into the series more closely; so far the polarity was a separate parameter to tcpm_mux_set() and the low level API. Guenter > Regards, > > Hans > > >>+#define MUX_USB_DEVICE (2 << 1) /* USB device mode */ > >>+#define MUX_USB_HOST (3 << 1) /* USB host mode */ > >>+#define MUX_USB_HOST_AND_DP_SRC (4 << 1) /* USB host + 2 lanes Display Port */ > >>+#define MUX_USB_DP_SRC (5 << 1) /* 4 lanes Display Port source */ > >>+#define MUX_USB_STATES (6 << 1) > >>+ > >> struct device; > >> struct mux_control; > >> > > _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
