Hi,
On 02-09-17 16:59, Guenter Roeck wrote:
On 09/01/2017 02:48 PM, Hans de Goede wrote:
Add MUX_USB_* state constant defines, which can be used by USB
device/host and Type-C polarity/role/altmode mux drivers and consumers
to ensure that they agree on the meaning of the mux_control_select()
state argument.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
include/linux/mux/consumer.h | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/include/linux/mux/consumer.h b/include/linux/mux/consumer.h
index 912dd48a3a5d..e3ec9b4db962 100644
--- a/include/linux/mux/consumer.h
+++ b/include/linux/mux/consumer.h
@@ -15,6 +15,22 @@
#include <linux/compiler.h>
+/*
+ * Mux state values for USB muxes, used for both USB device/host role muxes
+ * as well as for Type-C polarity/role/altmode muxes.
+ *
+ * MUX_USB_POLARITY_INV may be or-ed together with any other mux-state as
+ * inverted-polarity (Type-C plugged in upside down) can happen with any
+ * other mux-state.
+ */
+#define MUX_USB_POLARITY_INV BIT(0) /* Polarity inverted bit */
+#define MUX_USB_NONE (1 << 1) /* Mux open / not connected */
Why BIT(0) but (1 << 1) and so on ?
Because the polarity can be or-ed together with any of the other options.
Each option can be selected normal and inverted polarity (connector
inserted upside down).
Regards,
Hans
+#define MUX_USB_DEVICE (2 << 1) /* USB device mode */
+#define MUX_USB_HOST (3 << 1) /* USB host mode */
+#define MUX_USB_HOST_AND_DP_SRC (4 << 1) /* USB host + 2 lanes Display Port */
+#define MUX_USB_DP_SRC (5 << 1) /* 4 lanes Display Port source */
+#define MUX_USB_STATES (6 << 1)
+
struct device;
struct mux_control;
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
