From: Michael Ahern <ahern.michael.t@xxxxxxxxx>
Patch that resolves braces and KERN_ warnings by checkpatch.pl
Warnings: printk() should include KERN_ facility level, braces not needed, lines over 80 characters.
Signed-off-by: Michael Ahern
---
drivers/staging/comedi/drivers/serial2002.c | 206 ++++++++++++---------------
1 files changed, 93 insertions(+), 113 deletions(-)
diff --git a/drivers/staging/comedi/drivers/serial2002.c b/drivers/staging/comedi/drivers/serial2002.c
index c9be9e0..6949086 100644
--- a/drivers/staging/comedi/drivers/serial2002.c
+++ b/drivers/staging/comedi/drivers/serial2002.c
@@ -192,9 +192,10 @@ static int tty_read(struct file *f, int timeout)
elapsed =
(1000000 * (now.tv_sec - start.tv_sec) +
now.tv_usec - start.tv_usec);
- if (elapsed > timeout) {
+
+ if (elapsed > timeout)
break;
- }
+
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(((timeout -
elapsed) * HZ) / 10000);
@@ -204,9 +205,10 @@ static int tty_read(struct file *f, int timeout)
unsigned char ch;
f->f_pos = 0;
- if (f->f_op->read(f, &ch, 1, &f->f_pos) == 1) {
+
+ if (f->f_op->read(f, &ch, 1, &f->f_pos) == 1)
result = ch;
- }
+
}
} else {
/* Device does not support poll, busy wait */
@@ -215,9 +217,10 @@ static int tty_read(struct file *f, int timeout)
unsigned char ch;
retries++;
- if (retries >= timeout) {
+
+ if (retries >= timeout)
break;
- }
+
f->f_pos = 0;
if (f->f_op->read(f, &ch, 1, &f->f_pos) == 1) {
@@ -329,7 +332,7 @@ static struct serial_data serial_read(struct file *f, int timeout)
length++;
if (data < 0) {
- printk("serial2002 error\n");
+ printk(KERN_ERR "serial2002 error\n");
break;
} else if (data & 0x80) {
result.value = (result.value << 7) | (data & 0x7f);
@@ -402,7 +405,7 @@ static int serial_2002_open(struct comedi_device *dev)
devpriv->tty = filp_open(port, O_RDWR, 0);
if (IS_ERR(devpriv->tty)) {
result = (int)PTR_ERR(devpriv->tty);
- printk("serial_2002: file open error = %d\n", result);
+ printk(KERN_ERR "serial_2002: file open error = %d\n", result);
} else {
struct config_t {
@@ -434,7 +437,7 @@ static int serial_2002_open(struct comedi_device *dev)
}
tty_setspeed(devpriv->tty, devpriv->speed);
- poll_channel(devpriv->tty, 31); /* Start reading configuration */
+ poll_channel(devpriv->tty, 31); /* Start reading config */
while (1) {
struct serial_data data;
@@ -451,23 +454,23 @@ static int serial_2002_open(struct comedi_device *dev)
command = (data.value >> 8) & 0x3;
switch (kind) {
case 1:{
- cur_config = dig_in_config;
+ cur_config = dig_in_config;
}
break;
case 2:{
- cur_config = dig_out_config;
+ cur_config = dig_out_config;
}
break;
case 3:{
- cur_config = chan_in_config;
+ cur_config = chan_in_config;
}
break;
case 4:{
- cur_config = chan_out_config;
+ cur_config = chan_out_config;
}
break;
case 5:{
- cur_config = chan_in_config;
+ cur_config = chan_in_config;
}
break;
}
@@ -476,92 +479,69 @@ static int serial_2002_open(struct comedi_device *dev)
cur_config[channel].kind = kind;
switch (command) {
case 0:{
- cur_config[channel].bits
- =
- (data.value >> 10) &
- 0x3f;
+ cur_config[channel].bits
+ = (data.value >> 10) &
+ 0x3f;
}
break;
case 1:{
- int unit, sign, min;
- unit =
- (data.value >> 10) &
- 0x7;
- sign =
- (data.value >> 13) &
- 0x1;
- min =
- (data.value >> 14) &
- 0xfffff;
-
- switch (unit) {
- case 0:{
- min =
- min
- *
- 1000000;
- }
- break;
- case 1:{
- min =
- min
- *
- 1000;
- }
- break;
- case 2:{
- min =
- min
- * 1;
- }
- break;
+ int unit, sign, min;
+ unit = (data.value >> 10) &
+ 0x7;
+ sign = (data.value >> 13) &
+ 0x1;
+ min = (data.value >> 14) &
+ 0xfffff;
+
+ switch (unit) {
+ case 0:{
+ min = min * 1000000;
}
- if (sign) {
- min = -min;
+ break;
+ case 1:{
+ min = min * 1000;
}
- cur_config[channel].min
- = min;
+ break;
+ case 2:{
+ min = min * 1;
+ }
+ break;
+ }
+
+ if (sign)
+ min = -min;
+
+ cur_config[channel].min = min;
}
break;
case 2:{
- int unit, sign, max;
- unit =
- (data.value >> 10) &
- 0x7;
- sign =
- (data.value >> 13) &
- 0x1;
- max =
- (data.value >> 14) &
- 0xfffff;
-
- switch (unit) {
- case 0:{
- max =
- max
- *
- 1000000;
- }
- break;
- case 1:{
- max =
- max
- *
- 1000;
- }
- break;
- case 2:{
- max =
- max
- * 1;
- }
- break;
+ int unit, sign, max;
+ unit = (data.value >> 10) &
+ 0x7;
+ sign = (data.value >> 13) &
+ 0x1;
+ max = (data.value >> 14) &
+ 0xfffff;
+
+ switch (unit) {
+ case 0:{
+ max = max * 1000000;
+ }
+ break;
+ case 1:{
+ max = max * 1000;
}
- if (sign) {
- max = -max;
+ break;
+ case 2:{
+ max = max * 1;
}
- cur_config[channel].max
- = max;
+ break;
+ }
+
+ if (sign)
+ max = -max;
+
+ cur_config[channel].max = max;
}
break;
}
@@ -622,9 +602,9 @@ static int serial_2002_open(struct comedi_device *dev)
int j, chan;
for (chan = 0, j = 0; j < 32; j++) {
- if (c[j].kind == kind) {
+ if (c[j].kind == kind)
chan++;
- }
+
}
s = &dev->subdevices[i];
s->n_chan = chan;
@@ -649,9 +629,9 @@ static int serial_2002_open(struct comedi_device *dev)
}
for (chan = 0, j = 0; j < 32; j++) {
if (c[j].kind == kind) {
- if (mapping) {
+ if (mapping)
mapping[chan] = j;
- }
+
if (range) {
range[j].length = 1;
range[j].range.min =
@@ -704,9 +684,9 @@ err_alloc_configs:
static void serial_2002_close(struct comedi_device *dev)
{
- if (!IS_ERR(devpriv->tty) && (devpriv->tty != 0)) {
+ if (!IS_ERR(devpriv->tty) && (devpriv->tty != 0))
filp_close(devpriv->tty, 0);
- }
+
}
static int serial2002_di_rinsn(struct comedi_device *dev,
@@ -723,9 +703,9 @@ static int serial2002_di_rinsn(struct comedi_device *dev,
poll_digital(devpriv->tty, chan);
while (1) {
read = serial_read(devpriv->tty, 1000);
- if (read.kind != is_digital || read.index == chan) {
+ if (read.kind != is_digital || read.index == chan)
break;
- }
+
}
data[n] = read.value;
}
@@ -765,9 +745,9 @@ static int serial2002_ai_rinsn(struct comedi_device *dev,
poll_channel(devpriv->tty, chan);
while (1) {
read = serial_read(devpriv->tty, 1000);
- if (read.kind != is_channel || read.index == chan) {
+ if (read.kind != is_channel || read.index == chan)
break;
- }
+
}
data[n] = read.value;
}
@@ -801,9 +781,9 @@ static int serial2002_ao_rinsn(struct comedi_device *dev,
int n;
int chan = CR_CHAN(insn->chanspec);
- for (n = 0; n < insn->n; n++) {
+ for (n = 0; n < insn->n; n++)
data[n] = devpriv->ao_readback[chan];
- }
+
return n;
}
@@ -822,9 +802,9 @@ static int serial2002_ei_rinsn(struct comedi_device *dev,
poll_channel(devpriv->tty, chan);
while (1) {
read = serial_read(devpriv->tty, 1000);
- if (read.kind != is_channel || read.index == chan) {
+ if (read.kind != is_channel || read.index == chan)
break;
- }
+
}
data[n] = read.value;
}
@@ -836,16 +816,16 @@ static int serial2002_attach(struct comedi_device *dev,
{
struct comedi_subdevice *s;
- printk("comedi%d: serial2002: ", dev->minor);
+ printk(KERN_INFO "comedi%d: serial2002: ", dev->minor);
dev->board_name = thisboard->name;
- if (alloc_private(dev, sizeof(struct serial2002_private)) < 0) {
+ if (alloc_private(dev, sizeof(struct serial2002_private)) < 0)
return -ENOMEM;
- }
+
dev->open = serial_2002_open;
dev->close = serial_2002_close;
devpriv->port = it->options[0];
devpriv->speed = it->options[1];
- printk("/dev/ttyS%d @ %d\n", devpriv->port, devpriv->speed);
+ printk(KERN_INFO "/dev/ttyS%d @ %d\n", devpriv->port, devpriv->speed);
if (alloc_subdevices(dev, 5) < 0)
return -ENOMEM;
@@ -904,15 +884,15 @@ static int serial2002_detach(struct comedi_device *dev)
struct comedi_subdevice *s;
int i;
- printk("comedi%d: serial2002: remove\n", dev->minor);
+ printk(KERN_ERR "comedi%d: serial2002: remove\n", dev->minor);
for (i = 0; i < 5; i++) {
s = &dev->subdevices[i];
- if (s->maxdata_list) {
+ if (s->maxdata_list)
kfree(s->maxdata_list);
- }
- if (s->range_table_list) {
+
+ if (s->range_table_list)
kfree(s->range_table_list);
- }
+
}
return 0;
}
--
1.7.0.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
