Hi Sakari,
On Wed, Aug 09, 2017 at 02:15:53PM +0300, Sakari Ailus wrote:
> From: Rui Miguel Silva <rmfrfs@xxxxxxxxx>
>
> We are allocating memory for the v4l2 flash configuration structure and
> leak it in the normal path. Just use the stack for this as we do not
> use it outside of this function.
>
> Fixes: 2870b52bae4c ("greybus: lights: add lights implementation")
> Reported-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
> Signed-off-by: Rui Miguel Silva <rmfrfs@xxxxxxxxx>
> Reviewed-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
> ---
This patch is *not* the patch that I have send, here are the code
differences from my patch to the one in this series:
< struct led_classdev_flash *iled = NULL;
---
> struct led_classdev *iled = NULL;
51c57
< iled = &channel_ind->fled;
---
> iled = &channel_ind->fled.led_cdev;
89c95
So, this do not apply at all.
Maybe you change something in your side.
---
Cheers,
Rui
> drivers/staging/greybus/light.c | 29 +++++++++--------------------
> 1 file changed, 9 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/staging/greybus/light.c b/drivers/staging/greybus/light.c
> index 129ceed39829..0771db418f84 100644
> --- a/drivers/staging/greybus/light.c
> +++ b/drivers/staging/greybus/light.c
> @@ -534,25 +534,20 @@ static int gb_lights_light_v4l2_register(struct gb_light *light)
> {
> struct gb_connection *connection = get_conn_from_light(light);
> struct device *dev = &connection->bundle->dev;
> - struct v4l2_flash_config *sd_cfg;
> + struct v4l2_flash_config sd_cfg = { {0} };
> struct led_classdev_flash *fled;
> struct led_classdev *iled = NULL;
> struct gb_channel *channel_torch, *channel_ind, *channel_flash;
> - int ret = 0;
> -
> - sd_cfg = kcalloc(1, sizeof(*sd_cfg), GFP_KERNEL);
> - if (!sd_cfg)
> - return -ENOMEM;
>
> channel_torch = get_channel_from_mode(light, GB_CHANNEL_MODE_TORCH);
> if (channel_torch)
> __gb_lights_channel_v4l2_config(&channel_torch->intensity_uA,
> - &sd_cfg->torch_intensity);
> + &sd_cfg.torch_intensity);
>
> channel_ind = get_channel_from_mode(light, GB_CHANNEL_MODE_INDICATOR);
> if (channel_ind) {
> __gb_lights_channel_v4l2_config(&channel_ind->intensity_uA,
> - &sd_cfg->indicator_intensity);
> + &sd_cfg.indicator_intensity);
> iled = &channel_ind->fled.led_cdev;
> }
>
> @@ -561,27 +556,21 @@ static int gb_lights_light_v4l2_register(struct gb_light *light)
>
> fled = &channel_flash->fled;
>
> - snprintf(sd_cfg->dev_name, sizeof(sd_cfg->dev_name), "%s", light->name);
> + snprintf(sd_cfg.dev_name, sizeof(sd_cfg.dev_name), "%s", light->name);
>
> /* Set the possible values to faults, in our case all faults */
> - sd_cfg->flash_faults = LED_FAULT_OVER_VOLTAGE | LED_FAULT_TIMEOUT |
> + sd_cfg.flash_faults = LED_FAULT_OVER_VOLTAGE | LED_FAULT_TIMEOUT |
> LED_FAULT_OVER_TEMPERATURE | LED_FAULT_SHORT_CIRCUIT |
> LED_FAULT_OVER_CURRENT | LED_FAULT_INDICATOR |
> LED_FAULT_UNDER_VOLTAGE | LED_FAULT_INPUT_VOLTAGE |
> LED_FAULT_LED_OVER_TEMPERATURE;
>
> light->v4l2_flash = v4l2_flash_init(dev, NULL, fled, iled,
> - &v4l2_flash_ops, sd_cfg);
> - if (IS_ERR_OR_NULL(light->v4l2_flash)) {
> - ret = PTR_ERR(light->v4l2_flash);
> - goto out_free;
> - }
> + &v4l2_flash_ops, &sd_cfg);
> + if (IS_ERR_OR_NULL(light->v4l2_flash))
> + return PTR_ERR(light->v4l2_flash);
>
> - return ret;
> -
> -out_free:
> - kfree(sd_cfg);
> - return ret;
> + return 0;
> }
>
> static void gb_lights_light_v4l2_unregister(struct gb_light *light)
> --
> 2.11.0
>
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
