[PATCH 1/2] Staging: comedi: fix code style errors in s626.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: John Sheehan <john.d.sheehan@xxxxxxxxx>

A patch for s626.c to fix errors reported by
checkpatch.pl tool, namely,
-code indent should use tabs where possible
-"foo * bar" should be "foo *bar"
-trailing statements should be on next line

Signed-off-by: John Sheehan <john.d.sheehan@xxxxxxxxx>
---
 drivers/staging/comedi/drivers/s626.c |   67 +++++++++++++++++++--------------
 1 files changed, 39 insertions(+), 28 deletions(-)

diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index f775ee6..b78d7ad 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -60,10 +60,10 @@ INSN_CONFIG instructions:
    insn.insn=INSN_CONFIG;   //configuration instruction
    insn.n=1;                //number of operation (must be 1)
    insn.data=&initialvalue; //initial value loaded into encoder
-                            //during configuration
+				//during configuration
    insn.subdev=5;           //encoder subdevice
    insn.chanspec=CR_PACK(encoder_channel,0,AREF_OTHER); //encoder_channel
-                                                        //to configure
+							//to configure
 
    comedi_do_insn(cf,&insn); //executing configuration
 */
@@ -299,7 +299,7 @@ static int s626_enc_insn_write(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
 			       struct comedi_insn *insn, unsigned int *data);
 static int s626_ns_to_timer(int *nanosec, int round_mode);
-static int s626_ai_load_polllist(uint8_t * ppl, struct comedi_cmd *cmd);
+static int s626_ai_load_polllist(uint8_t *ppl, struct comedi_cmd *cmd);
 static int s626_ai_inttrig(struct comedi_device *dev,
 			   struct comedi_subdevice *s, unsigned int trignum);
 static irqreturn_t s626_irq_handler(int irq, void *d);
@@ -330,16 +330,16 @@ static void CloseDMAB(struct comedi_device *dev, struct bufferDMA *pdma,
 /*  COUNTER OBJECT ------------------------------------------------ */
 struct enc_private {
 	/*  Pointers to functions that differ for A and B counters: */
-	uint16_t(*GetEnable) (struct comedi_device * dev, struct enc_private *);	/* Return clock enable. */
-	uint16_t(*GetIntSrc) (struct comedi_device * dev, struct enc_private *);	/* Return interrupt source. */
-	uint16_t(*GetLoadTrig) (struct comedi_device * dev, struct enc_private *);	/* Return preload trigger source. */
-	uint16_t(*GetMode) (struct comedi_device * dev, struct enc_private *);	/* Return standardized operating mode. */
-	void (*PulseIndex) (struct comedi_device * dev, struct enc_private *);	/* Generate soft index strobe. */
-	void (*SetEnable) (struct comedi_device * dev, struct enc_private *, uint16_t enab);	/* Program clock enable. */
-	void (*SetIntSrc) (struct comedi_device * dev, struct enc_private *, uint16_t IntSource);	/* Program interrupt source. */
-	void (*SetLoadTrig) (struct comedi_device * dev, struct enc_private *, uint16_t Trig);	/* Program preload trigger source. */
-	void (*SetMode) (struct comedi_device * dev, struct enc_private *, uint16_t Setup, uint16_t DisableIntSrc);	/* Program standardized operating mode. */
-	void (*ResetCapFlags) (struct comedi_device * dev, struct enc_private *);	/* Reset event capture flags. */
+	uint16_t(*GetEnable) (struct comedi_device *dev, struct enc_private *);	/* Return clock enable. */
+	uint16_t(*GetIntSrc) (struct comedi_device *dev, struct enc_private *);	/* Return interrupt source. */
+	uint16_t(*GetLoadTrig) (struct comedi_device *dev, struct enc_private *);	/* Return preload trigger source. */
+	uint16_t(*GetMode) (struct comedi_device *dev, struct enc_private *);	/* Return standardized operating mode. */
+	void (*PulseIndex) (struct comedi_device *dev, struct enc_private *);	/* Generate soft index strobe. */
+	void (*SetEnable) (struct comedi_device *dev, struct enc_private *, uint16_t enab);	/* Program clock enable. */
+	void (*SetIntSrc) (struct comedi_device *dev, struct enc_private *, uint16_t IntSource);	/* Program interrupt source. */
+	void (*SetLoadTrig) (struct comedi_device *dev, struct enc_private *, uint16_t Trig);	/* Program preload trigger source. */
+	void (*SetMode) (struct comedi_device *dev, struct enc_private *, uint16_t Setup, uint16_t DisableIntSrc);	/* Program standardized operating mode. */
+	void (*ResetCapFlags) (struct comedi_device *dev, struct enc_private *);	/* Reset event capture flags. */
 
 	uint16_t MyCRA;		/*    Address of CRA register. */
 	uint16_t MyCRB;		/*    Address of CRB register. */
@@ -815,7 +815,8 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		/*  Write I2C control: abort any I2C activity. */
 		MC_ENABLE(P_MC2, MC2_UPLD_IIC);
 		/*  Invoke command  upload */
-		while ((RR7146(P_MC2) & MC2_UPLD_IIC) == 0) ;
+		while ((RR7146(P_MC2) & MC2_UPLD_IIC) == 0)
+		    ;
 		/*  and wait for upload to complete. */
 
 		/* Per SAA7146 data sheet, write to STATUS reg twice to
@@ -824,7 +825,8 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 			WR7146(P_I2CSTAT, I2C_CLKSEL);
 			/*  Write I2C control: reset  error flags. */
 			MC_ENABLE(P_MC2, MC2_UPLD_IIC);	/*  Invoke command upload */
-			while (!MC_TEST(P_MC2, MC2_UPLD_IIC)) ;
+			while (!MC_TEST(P_MC2, MC2_UPLD_IIC))
+			    ;
 			/* and wait for upload to complete. */
 		}
 
@@ -1687,7 +1689,8 @@ static int s626_ai_insn_read(struct comedi_device *dev,
 		/*  shift into FB BUFFER 1 register. */
 
 		/*  Wait for ADC done. */
-		while (!(RR7146(P_PSR) & PSR_GPIO2)) ;
+		while (!(RR7146(P_PSR) & PSR_GPIO2))
+		    ;
 
 		/*  Fetch ADC data. */
 		if (n != 0)
@@ -1719,7 +1722,8 @@ static int s626_ai_insn_read(struct comedi_device *dev,
 	/*  Wait for the data to arrive in FB BUFFER 1 register. */
 
 	/*  Wait for ADC done. */
-	while (!(RR7146(P_PSR) & PSR_GPIO2)) ;
+	while (!(RR7146(P_PSR) & PSR_GPIO2))
+	    ;
 
 	/*  Fetch ADC data from audio interface's input shift register. */
 
@@ -1732,7 +1736,7 @@ static int s626_ai_insn_read(struct comedi_device *dev,
 	return n;
 }
 
-static int s626_ai_load_polllist(uint8_t * ppl, struct comedi_cmd *cmd)
+static int s626_ai_load_polllist(uint8_t *ppl, struct comedi_cmd *cmd)
 {
 
 	int n;
@@ -2461,8 +2465,7 @@ static void s626_timer_load(struct comedi_device *dev, struct enc_private *k,
 static uint8_t trimchan[] = { 10, 9, 8, 3, 2, 7, 6, 1, 0, 5, 4 };
 
 /*  TrimDac LogicalChan-to-EepromAdrs mapping table. */
-static uint8_t trimadrs[] =
-    { 0x40, 0x41, 0x42, 0x50, 0x51, 0x52, 0x53, 0x60, 0x61, 0x62, 0x63 };
+static uint8_t trimadrs[] = { 0x40, 0x41, 0x42, 0x50, 0x51, 0x52, 0x53, 0x60, 0x61, 0x62, 0x63 };
 
 static void LoadTrimDACs(struct comedi_device *dev)
 {
@@ -2560,10 +2563,12 @@ static uint32_t I2Chandshake(struct comedi_device *dev, uint32_t val)
 	/*  upload confirmation. */
 
 	MC_ENABLE(P_MC2, MC2_UPLD_IIC);
-	while (!MC_TEST(P_MC2, MC2_UPLD_IIC)) ;
+	while (!MC_TEST(P_MC2, MC2_UPLD_IIC))
+	    ;
 
 	/*  Wait until I2C bus transfer is finished or an error occurs. */
-	while ((RR7146(P_I2CCTRL) & (I2C_BUSY | I2C_ERR)) == I2C_BUSY) ;
+	while ((RR7146(P_I2CCTRL) & (I2C_BUSY | I2C_ERR)) == I2C_BUSY)
+	    ;
 
 	/*  Return non-zero if I2C error occured. */
 	return RR7146(P_I2CCTRL) & I2C_ERR;
@@ -2677,7 +2682,8 @@ static void SendDAC(struct comedi_device *dev, uint32_t val)
 	 * Done by polling the DMAC enable flag; this flag is automatically
 	 * cleared when the transfer has finished.
 	 */
-	while ((RR7146(P_MC1) & MC1_A2OUT) != 0) ;
+	while ((RR7146(P_MC1) & MC1_A2OUT) != 0)
+	    ;
 
 	/* START THE OUTPUT STREAM TO THE TARGET DAC -------------------- */
 
@@ -2694,7 +2700,8 @@ static void SendDAC(struct comedi_device *dev, uint32_t val)
 	 * finished transferring the DAC's data DWORD from the output FIFO
 	 * to the output buffer register.
 	 */
-	while ((RR7146(P_SSR) & SSR_AF2_OUT) == 0) ;
+	while ((RR7146(P_SSR) & SSR_AF2_OUT) == 0)
+	    ;
 
 	/* Set up to trap execution at slot 0 when the TSL sequencer cycles
 	 * back to slot 0 after executing the EOS in slot 5.  Also,
@@ -2730,7 +2737,8 @@ static void SendDAC(struct comedi_device *dev, uint32_t val)
 		 * from 0xFF to 0x00, which slot 0 causes to happen by shifting
 		 * out/in on SD2 the 0x00 that is always referenced by slot 5.
 		 */
-		while ((RR7146(P_FB_BUFFER2) & 0xFF000000) != 0) ;
+		while ((RR7146(P_FB_BUFFER2) & 0xFF000000) != 0)
+		    ;
 	}
 	/* Either (1) we were too late setting the slot 0 trap; the TSL
 	 * sequencer restarted slot 0 before we could set the EOS trap flag,
@@ -2746,7 +2754,8 @@ static void SendDAC(struct comedi_device *dev, uint32_t val)
 	 * the next DAC write.  This is detected when FB_BUFFER2 MSB changes
 	 * from 0x00 to 0xFF.
 	 */
-	while ((RR7146(P_FB_BUFFER2) & 0xFF000000) == 0) ;
+	while ((RR7146(P_FB_BUFFER2) & 0xFF000000) == 0)
+	    ;
 }
 
 static void WriteMISC2(struct comedi_device *dev, uint16_t NewImage)
@@ -2785,10 +2794,12 @@ static void DEBItransfer(struct comedi_device *dev)
 
 	/*  Wait for completion of upload from shadow RAM to DEBI control */
 	/*  register. */
-	while (!MC_TEST(P_MC2, MC2_UPLD_DEBI)) ;
+	while (!MC_TEST(P_MC2, MC2_UPLD_DEBI))
+	    ;
 
 	/*  Wait until DEBI transfer is done. */
-	while (RR7146(P_PSR) & PSR_DEBI_S) ;
+	while (RR7146(P_PSR) & PSR_DEBI_S)
+	    ;
 }
 
 /*  Write a value to a gate array register. */
-- 
1.7.0.4

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel


[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux