On 15/06/10 06:43, Gustavo Silva wrote:
> 2010/6/14 Ian Abbott <abbotti@xxxxxxxxx>:
>> On 13/06/10 04:25, Gustavo Silva wrote:
>>> + * Driver: pcl812
>>> + * Description: Advantech PCL-812/PG, PCL-813/B,
>>> + * ADLink ACL-8112DG/HG/PG, ACL-8113, ACL-8216,
>>> + * ICP DAS A-821PGH/PGL/PGL-NDA, A-822PGH/PGL, A-823PGH/PGL, A-826PG,
>>> + * ICP DAS ISO-813
>>> + * Author: Michal Dobes <dobes@xxxxxxxxx>
>>> + * Devices: [Advantech] PCL-812 (pcl812), PCL-812PG (pcl812pg),
>>> + * PCL-813 (pcl813), PCL-813B (pcl813b), [ADLink] ACL-8112DG (acl8112dg),
>>> + * ACL-8112HG (acl8112hg), ACL-8113 (acl-8113), ACL-8216 (acl8216),
>>> + * [ICP] ISO-813 (iso813), A-821PGH (a821pgh), A-821PGL (a821pgl),
>>> + * A-821PGL-NDA (a821pclnda), A-822PGH (a822pgh), A-822PGL (a822pgl),
>>> + * A-823PGH (a823pgh), A-823PGL (a823pgl), A-826PG (a826pg)
>>
>> Please add extra whitespace (a tab or a couple of spaces) to the
>> "Devices:" continuation lines here, e.g.:
>>
>> * Devices: [Advantech] PCL-812 (pcl812), PCL-812PG (pcl812pg),
>> * PCL-813 (pcl813), PCL-813B (pcl813b), [ADLink] ACL-8112DG (acl8112dg),
>> * ACL-8112HG (acl8112hg), ACL-8113 (acl-8113), ACL-8216 (acl8216),
>> * [ICP] ISO-813 (iso813), A-821PGH (a821pgh), A-821PGL (a821pgl),
>> * A-821PGL-NDA (a821pclnda), A-822PGH (a822pgh), A-822PGL (a822pgl),
>> * A-823PGH (a823pgh), A-823PGL (a823pgl), A-826PG (a826pg)
>>
>> This extra whitespace is for the benefit of some scripts we have in
>> comedi and comedilib for extracting the documentation. (Actually, these
>> scripts don't handle the " * " at the beginning of the line yet, but I'm
>> working on that!)
>>
>> Thanks.
>>
>> --
>> -=( Ian Abbott @ MEV Ltd. E-mail: <abbotti@xxxxxxxxx> )=-
>> -=( Tel: +44 (0)161 477 1898 FAX: +44 (0)161 718 3587 )=-
>>
>
> Hi Ian,
>
> Thanks for your comments,
> let me known if this OK for you now.
>
> Best Regards,
> Gus.
Hi Gus,
It looks fine. You can add my signed-off-by line if you want to.
Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
> This is a patch to the pcl812.c file that fixes up the following
> issues:
>
> ERROR: code indent should use tabs where possible x 27
> WARNING: line over 80 characters x 37
> WARNING: please, no space before tabs x 13
> WARNING: braces {} are not necessary for single statement blocks x 2
> WARNING: printk() should include KERN_ facility level x 22
> WARNING: braces {} are not necessary for any arm of this statement x 5
>
> Signed-off-by: Gustavo Silva <silvagustavo@xxxxxxxxxxxxxxxxxxxxx>
> ---
> drivers/staging/comedi/drivers/pcl812.c | 476 +++++++++++++++++--------------
> 1 files changed, 259 insertions(+), 217 deletions(-)
>
> diff --git a/drivers/staging/comedi/drivers/pcl812.c
> b/drivers/staging/comedi/drivers/pcl812.c
> index 1ddc19c..1ea239a 100644
> --- a/drivers/staging/comedi/drivers/pcl812.c
> +++ b/drivers/staging/comedi/drivers/pcl812.c
> @@ -15,97 +15,98 @@
> * card: A-823PGH, A-823PGL, A-826PG
> * driver: a823pgh, a823pgl, a826pg
> */
> +
> /*
> -Driver: pcl812
> -Description: Advantech PCL-812/PG, PCL-813/B,
> - ADLink ACL-8112DG/HG/PG, ACL-8113, ACL-8216,
> - ICP DAS A-821PGH/PGL/PGL-NDA, A-822PGH/PGL, A-823PGH/PGL, A-826PG,
> - ICP DAS ISO-813
> -Author: Michal Dobes <dobes@xxxxxxxxx>
> -Devices: [Advantech] PCL-812 (pcl812), PCL-812PG (pcl812pg),
> - PCL-813 (pcl813), PCL-813B (pcl813b), [ADLink] ACL-8112DG (acl8112dg),
> - ACL-8112HG (acl8112hg), ACL-8113 (acl-8113), ACL-8216 (acl8216),
> - [ICP] ISO-813 (iso813), A-821PGH (a821pgh), A-821PGL (a821pgl),
> - A-821PGL-NDA (a821pclnda), A-822PGH (a822pgh), A-822PGL (a822pgl),
> - A-823PGH (a823pgh), A-823PGL (a823pgl), A-826PG (a826pg)
> -Updated: Mon, 06 Aug 2007 12:03:15 +0100
> -Status: works (I hope. My board fire up under my hands
> - and I cann't test all features.)
> -
> -This driver supports insn and cmd interfaces. Some boards support only insn
> -becouse their hardware don't allow more (PCL-813/B, ACL-8113, ISO-813).
> -Data transfer over DMA is supported only when you measure only one
> -channel, this is too hardware limitation of these boards.
> -
> -Options for PCL-812:
> - [0] - IO Base
> - [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
> - [2] - DMA (0=disable, 1, 3)
> - [3] - 0=trigger source is internal 8253 with 2MHz clock
> - 1=trigger source is external
> - [4] - 0=A/D input range is +/-10V
> - 1=A/D input range is +/-5V
> - 2=A/D input range is +/-2.5V
> - 3=A/D input range is +/-1.25V
> - 4=A/D input range is +/-0.625V
> - 5=A/D input range is +/-0.3125V
> - [5] - 0=D/A outputs 0-5V (internal reference -5V)
> - 1=D/A outputs 0-10V (internal reference -10V)
> - 2=D/A outputs unknown (external reference)
> -
> -Options for PCL-812PG, ACL-8112PG:
> - [0] - IO Base
> - [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
> - [2] - DMA (0=disable, 1, 3)
> - [3] - 0=trigger source is internal 8253 with 2MHz clock
> - 1=trigger source is external
> - [4] - 0=A/D have max +/-5V input
> - 1=A/D have max +/-10V input
> - [5] - 0=D/A outputs 0-5V (internal reference -5V)
> - 1=D/A outputs 0-10V (internal reference -10V)
> - 2=D/A outputs unknown (external reference)
> -
> -Options for ACL-8112DG/HG, A-822PGL/PGH, A-823PGL/PGH, ACL-8216, A-826PG:
> - [0] - IO Base
> - [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
> - [2] - DMA (0=disable, 1, 3)
> - [3] - 0=trigger source is internal 8253 with 2MHz clock
> - 1=trigger source is external
> - [4] - 0=A/D channels are S.E.
> - 1=A/D channels are DIFF
> - [5] - 0=D/A outputs 0-5V (internal reference -5V)
> - 1=D/A outputs 0-10V (internal reference -10V)
> - 2=D/A outputs unknown (external reference)
> -
> -Options for A-821PGL/PGH:
> - [0] - IO Base
> - [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
> - [2] - 0=A/D channels are S.E.
> - 1=A/D channels are DIFF
> - [3] - 0=D/A output 0-5V (internal reference -5V)
> - 1=D/A output 0-10V (internal reference -10V)
> -
> -Options for A-821PGL-NDA:
> - [0] - IO Base
> - [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
> - [2] - 0=A/D channels are S.E.
> - 1=A/D channels are DIFF
> -
> -Options for PCL-813:
> - [0] - IO Base
> -
> -Options for PCL-813B:
> - [0] - IO Base
> - [1] - 0= bipolar inputs
> - 1= unipolar inputs
> -
> -Options for ACL-8113, ISO-813:
> - [0] - IO Base
> - [1] - 0= 10V bipolar inputs
> - 1= 10V unipolar inputs
> - 2= 20V bipolar inputs
> - 3= 20V unipolar inputs
> -*/
> + * Driver: pcl812
> + * Description: Advantech PCL-812/PG, PCL-813/B,
> + * ADLink ACL-8112DG/HG/PG, ACL-8113, ACL-8216,
> + * ICP DAS A-821PGH/PGL/PGL-NDA, A-822PGH/PGL, A-823PGH/PGL, A-826PG,
> + * ICP DAS ISO-813
> + * Author: Michal Dobes <dobes@xxxxxxxxx>
> + * Devices: [Advantech] PCL-812 (pcl812), PCL-812PG (pcl812pg),
> + * PCL-813 (pcl813), PCL-813B (pcl813b), [ADLink] ACL-8112DG (acl8112dg),
> + * ACL-8112HG (acl8112hg), ACL-8113 (acl-8113), ACL-8216 (acl8216),
> + * [ICP] ISO-813 (iso813), A-821PGH (a821pgh), A-821PGL (a821pgl),
> + * A-821PGL-NDA (a821pclnda), A-822PGH (a822pgh), A-822PGL (a822pgl),
> + * A-823PGH (a823pgh), A-823PGL (a823pgl), A-826PG (a826pg)
> + * Updated: Mon, 06 Aug 2007 12:03:15 +0100
> + * Status: works (I hope. My board fire up under my hands
> + * and I cann't test all features.)
> + *
> + * This driver supports insn and cmd interfaces. Some boards support only insn
> + * becouse their hardware don't allow more (PCL-813/B, ACL-8113, ISO-813).
> + * Data transfer over DMA is supported only when you measure only one
> + * channel, this is too hardware limitation of these boards.
> + *
> + * Options for PCL-812:
> + * [0] - IO Base
> + * [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
> + * [2] - DMA (0=disable, 1, 3)
> + * [3] - 0=trigger source is internal 8253 with 2MHz clock
> + * 1=trigger source is external
> + * [4] - 0=A/D input range is +/-10V
> + * 1=A/D input range is +/-5V
> + * 2=A/D input range is +/-2.5V
> + * 3=A/D input range is +/-1.25V
> + * 4=A/D input range is +/-0.625V
> + * 5=A/D input range is +/-0.3125V
> + * [5] - 0=D/A outputs 0-5V (internal reference -5V)
> + * 1=D/A outputs 0-10V (internal reference -10V)
> + * 2=D/A outputs unknown (external reference)
> + *
> + * Options for PCL-812PG, ACL-8112PG:
> + * [0] - IO Base
> + * [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
> + * [2] - DMA (0=disable, 1, 3)
> + * [3] - 0=trigger source is internal 8253 with 2MHz clock
> + * 1=trigger source is external
> + * [4] - 0=A/D have max +/-5V input
> + * 1=A/D have max +/-10V input
> + * [5] - 0=D/A outputs 0-5V (internal reference -5V)
> + * 1=D/A outputs 0-10V (internal reference -10V)
> + * 2=D/A outputs unknown (external reference)
> + *
> + * Options for ACL-8112DG/HG, A-822PGL/PGH, A-823PGL/PGH, ACL-8216, A-826PG:
> + * [0] - IO Base
> + * [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
> + * [2] - DMA (0=disable, 1, 3)
> + * [3] - 0=trigger source is internal 8253 with 2MHz clock
> + * 1=trigger source is external
> + * [4] - 0=A/D channels are S.E.
> + * 1=A/D channels are DIFF
> + * [5] - 0=D/A outputs 0-5V (internal reference -5V)
> + * 1=D/A outputs 0-10V (internal reference -10V)
> + * 2=D/A outputs unknown (external reference)
> + *
> + * Options for A-821PGL/PGH:
> + * [0] - IO Base
> + * [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
> + * [2] - 0=A/D channels are S.E.
> + * 1=A/D channels are DIFF
> + * [3] - 0=D/A output 0-5V (internal reference -5V)
> + * 1=D/A output 0-10V (internal reference -10V)
> + *
> + * Options for A-821PGL-NDA:
> + * [0] - IO Base
> + * [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
> + * [2] - 0=A/D channels are S.E.
> + * 1=A/D channels are DIFF
> + *
> + * Options for PCL-813:
> + * [0] - IO Base
> + *
> + * Options for PCL-813B:
> + * [0] - IO Base
> + * [1] - 0= bipolar inputs
> + * 1= unipolar inputs
> + *
> + * Options for ACL-8113, ISO-813:
> + * [0] - IO Base
> + * [1] - 0= 10V bipolar inputs
> + * 1= 10V unipolar inputs
> + * 2= 20V bipolar inputs
> + * 3= 20V unipolar inputs
> + */
>
> #include <linux/interrupt.h>
> #include <linux/gfp.h>
> @@ -117,49 +118,50 @@ Options for ACL-8113, ISO-813:
>
> #include "8253.h"
>
> -#undef PCL812_EXTDEBUG /* if this is defined then a lot of messages
> is printed */
> +/* if this is defined then a lot of messages is printed */
> +#undef PCL812_EXTDEBUG
>
> /* hardware types of the cards */
> -#define boardPCL812PG 0 /* and ACL-8112PG */
> -#define boardPCL813B 1
> -#define boardPCL812 2
> -#define boardPCL813 3
> -#define boardISO813 5
> -#define boardACL8113 6
> -#define boardACL8112 7 /* ACL-8112DG/HG, A-822PGL/PGH, A-823PGL/PGH */
> -#define boardACL8216 8 /* and ICP DAS A-826PG */
> -#define boardA821 9 /* PGH, PGL, PGL/NDA versions */
> -
> -#define PCLx1x_IORANGE 16
> -
> -#define PCL812_CTR0 0
> -#define PCL812_CTR1 1
> -#define PCL812_CTR2 2
> -#define PCL812_CTRCTL 3
> -#define PCL812_AD_LO 4
> -#define PCL812_DA1_LO 4
> -#define PCL812_AD_HI 5
> -#define PCL812_DA1_HI 5
> -#define PCL812_DA2_LO 6
> -#define PCL812_DI_LO 6
> -#define PCL812_DA2_HI 7
> -#define PCL812_DI_HI 7
> -#define PCL812_CLRINT 8
> -#define PCL812_GAIN 9
> -#define PCL812_MUX 10
> -#define PCL812_MODE 11
> -#define PCL812_CNTENABLE 10
> -#define PCL812_SOFTTRIG 12
> -#define PCL812_DO_LO 13
> -#define PCL812_DO_HI 14
> -
> -#define PCL812_DRDY 0x10 /* =0 data ready */
> -
> -#define ACL8216_STATUS 8 /* 5. bit signalize data ready */
> -
> -#define ACL8216_DRDY 0x20 /* =0 data ready */
> -
> -#define MAX_CHANLIST_LEN 256 /* length of scan list */
> +#define boardPCL812PG 0 /* and ACL-8112PG */
> +#define boardPCL813B 1
> +#define boardPCL812 2
> +#define boardPCL813 3
> +#define boardISO813 5
> +#define boardACL8113 6
> +#define boardACL8112 7 /* ACL-8112DG/HG, A-822PGL/PGH, A-823PGL/PGH */
> +#define boardACL8216 8 /* and ICP DAS A-826PG */
> +#define boardA821 9 /* PGH, PGL, PGL/NDA versions */
> +
> +#define PCLx1x_IORANGE 16
> +
> +#define PCL812_CTR0 0
> +#define PCL812_CTR1 1
> +#define PCL812_CTR2 2
> +#define PCL812_CTRCTL 3
> +#define PCL812_AD_LO 4
> +#define PCL812_DA1_LO 4
> +#define PCL812_AD_HI 5
> +#define PCL812_DA1_HI 5
> +#define PCL812_DA2_LO 6
> +#define PCL812_DI_LO 6
> +#define PCL812_DA2_HI 7
> +#define PCL812_DI_HI 7
> +#define PCL812_CLRINT 8
> +#define PCL812_GAIN 9
> +#define PCL812_MUX 10
> +#define PCL812_MODE 11
> +#define PCL812_CNTENABLE 10
> +#define PCL812_SOFTTRIG 12
> +#define PCL812_DO_LO 13
> +#define PCL812_DO_HI 14
> +
> +#define PCL812_DRDY 0x10 /* =0 data ready */
> +
> +#define ACL8216_STATUS 8 /* 5. bit signalize data ready */
> +
> +#define ACL8216_DRDY 0x20 /* =0 data ready */
> +
> +#define MAX_CHANLIST_LEN 256 /* length of scan list */
>
> static const struct comedi_lrange range_pcl812pg_ai = { 5, {
> BIP_RANGE(5),
> @@ -466,10 +468,13 @@ static int pcl812_ai_insn_read(struct comedi_device *dev,
> int n;
> int timeout, hi;
>
> - outb(devpriv->mode_reg_int | 1, dev->iobase + PCL812_MODE); /*
> select software trigger */
> - setup_range_channel(dev, s, insn->chanspec, 1); /* select channel
> and renge */
> + /* select software trigger */
> + outb(devpriv->mode_reg_int | 1, dev->iobase + PCL812_MODE);
> + /* select channel and renge */
> + setup_range_channel(dev, s, insn->chanspec, 1);
> for (n = 0; n < insn->n; n++) {
> - outb(255, dev->iobase + PCL812_SOFTTRIG); /* start conversion */
> + /* start conversion */
> + outb(255, dev->iobase + PCL812_SOFTTRIG);
> udelay(5);
> timeout = 50; /* wait max 50us, it must finish under 33us */
> while (timeout--) {
> @@ -501,10 +506,13 @@ static int acl8216_ai_insn_read(struct comedi_device *dev,
> int n;
> int timeout;
>
> - outb(1, dev->iobase + PCL812_MODE); /* select software trigger */
> - setup_range_channel(dev, s, insn->chanspec, 1); /* select channel
> and renge */
> + /* select software trigger */
> + outb(1, dev->iobase + PCL812_MODE);
> + /* select channel and renge */
> + setup_range_channel(dev, s, insn->chanspec, 1);
> for (n = 0; n < insn->n; n++) {
> - outb(255, dev->iobase + PCL812_SOFTTRIG); /* start conversion */
> + /* start conversion */
> + outb(255, dev->iobase + PCL812_SOFTTRIG);
> udelay(5);
> timeout = 50; /* wait max 50us, it must finish under 33us */
> while (timeout--) {
> @@ -558,9 +566,8 @@ static int pcl812_ao_insn_read(struct comedi_device *dev,
> int chan = CR_CHAN(insn->chanspec);
> int i;
>
> - for (i = 0; i < insn->n; i++) {
> + for (i = 0; i < insn->n; i++)
> data[i] = devpriv->ao_readback[chan];
> - }
>
> return i;
> }
> @@ -608,14 +615,15 @@ static int pcl812_do_insn_bits(struct comedi_device *dev,
> */
> static void pcl812_cmdtest_out(int e, struct comedi_cmd *cmd)
> {
> - printk("pcl812 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
> + printk(KERN_INFO "pcl812 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
> cmd->start_src, cmd->scan_begin_src, cmd->convert_src);
> - printk("pcl812 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
> + printk(KERN_INFO "pcl812 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
> cmd->start_arg, cmd->scan_begin_arg, cmd->convert_arg);
> - printk("pcl812 e=%d stopsrc=%x scanend=%x\n", e, cmd->stop_src,
> - cmd->scan_end_src);
> - printk("pcl812 e=%d stoparg=%d scanendarg=%d chanlistlen=%d\n", e,
> - cmd->stop_arg, cmd->scan_end_arg, cmd->chanlist_len);
> + printk(KERN_INFO "pcl812 e=%d stopsrc=%x scanend=%x\n", e,
> + cmd->stop_src, cmd->scan_end_src);
> + printk(KERN_INFO "pcl812 e=%d stoparg=%d scanendarg=%d "
> + "chanlistlen=%d\n", e, cmd->stop_arg, cmd->scan_end_arg,
> + cmd->chanlist_len);
> }
> #endif
>
> @@ -645,11 +653,11 @@ static int pcl812_ai_cmdtest(struct comedi_device *dev,
> err++;
>
> tmp = cmd->convert_src;
> - if (devpriv->use_ext_trg) {
> + if (devpriv->use_ext_trg)
> cmd->convert_src &= TRIG_EXT;
> - } else {
> + else
> cmd->convert_src &= TRIG_TIMER;
> - }
> +
> if (!cmd->convert_src || tmp != cmd->convert_src)
> err++;
>
> @@ -673,7 +681,10 @@ static int pcl812_ai_cmdtest(struct comedi_device *dev,
> return 1;
> }
>
> - /* step 2: make sure trigger sources are unique and mutually compatible */
> + /*
> + * step 2: make sure trigger sources are
> + * unique and mutually compatible
> + */
>
> if (cmd->start_src != TRIG_NOW) {
> cmd->start_src = TRIG_NOW;
> @@ -807,7 +818,7 @@ static int pcl812_ai_cmd(struct comedi_device
> *dev, struct comedi_subdevice *s)
> struct comedi_cmd *cmd = &s->async->cmd;
>
> #ifdef PCL812_EXTDEBUG
> - printk("pcl812 EDBG: BGN: pcl812_ai_cmd(...)\n");
> + printk(KERN_DEBUG "pcl812 EDBG: BGN: pcl812_ai_cmd(...)\n");
> #endif
>
> if (cmd->start_src != TRIG_NOW)
> @@ -842,13 +853,15 @@ static int pcl812_ai_cmd(struct comedi_device
> *dev, struct comedi_subdevice *s)
> devpriv->ai_n_chan = cmd->chanlist_len;
> memcpy(devpriv->ai_chanlist, cmd->chanlist,
> sizeof(unsigned int) * cmd->scan_end_arg);
> - setup_range_channel(dev, s, devpriv->ai_chanlist[0], 1); /* select
> first channel and range */
> + /* select first channel and range */
> + setup_range_channel(dev, s, devpriv->ai_chanlist[0], 1);
>
> if (devpriv->dma) { /* check if we can use DMA transfer */
> devpriv->ai_dma = 1;
> for (i = 1; i < devpriv->ai_n_chan; i++)
> if (devpriv->ai_chanlist[0] != devpriv->ai_chanlist[i]) {
> - devpriv->ai_dma = 0; /* we cann't use DMA :-( */
> + /* we cann't use DMA :-( */
> + devpriv->ai_dma = 0;
> break;
> }
> } else
> @@ -869,14 +882,18 @@ static int pcl812_ai_cmd(struct comedi_device
> *dev, struct comedi_subdevice *s)
> devpriv->ai_poll_ptr = 0;
> s->async->cur_chan = 0;
>
> - if ((devpriv->ai_flags & TRIG_WAKE_EOS)) { /* don't we want wake up
> every scan? */
> + /* don't we want wake up every scan? */
> + if ((devpriv->ai_flags & TRIG_WAKE_EOS)) {
> devpriv->ai_eos = 1;
> +
> + /* DMA is useless for this situation */
> if (devpriv->ai_n_chan == 1)
> - devpriv->ai_dma = 0; /* DMA is useless for this situation */
> + devpriv->ai_dma = 0;
> }
>
> if (devpriv->ai_dma) {
> - if (devpriv->ai_eos) { /* we use EOS, so adapt DMA buffer to one scan */
> + /* we use EOS, so adapt DMA buffer to one scan */
> + if (devpriv->ai_eos) {
> devpriv->dmabytestomove[0] =
> devpriv->ai_n_chan * sizeof(short);
> devpriv->dmabytestomove[1] =
> @@ -894,9 +911,17 @@ static int pcl812_ai_cmd(struct comedi_device
> *dev, struct comedi_subdevice *s)
> if (devpriv->ai_neverending) {
> devpriv->dma_runs_to_end = 1;
> } else {
> - bytes = devpriv->ai_n_chan * devpriv->ai_scans *
> sizeof(short); /* how many samples we must transfer? */
> - devpriv->dma_runs_to_end = bytes / devpriv->dmabytestomove[0]; /*
> how many DMA pages we must fill */
> - devpriv->last_dma_run = bytes % devpriv->dmabytestomove[0]; /* on
> last dma transfer must be moved */
> + /* how many samples we must transfer? */
> + bytes = devpriv->ai_n_chan *
> + devpriv->ai_scans * sizeof(short);
> +
> + /* how many DMA pages we must fill */
> + devpriv->dma_runs_to_end =
> + bytes / devpriv->dmabytestomove[0];
> +
> + /* on last dma transfer must be moved */
> + devpriv->last_dma_run =
> + bytes % devpriv->dmabytestomove[0];
> if (devpriv->dma_runs_to_end == 0)
> devpriv->dmabytestomove[0] =
> devpriv->last_dma_run;
> @@ -934,14 +959,13 @@ static int pcl812_ai_cmd(struct comedi_device
> *dev, struct comedi_subdevice *s)
> break;
> }
>
> - if (devpriv->ai_dma) {
> - outb(devpriv->mode_reg_int | 2, dev->iobase + PCL812_MODE); /* let's go! */
> - } else {
> - outb(devpriv->mode_reg_int | 6, dev->iobase + PCL812_MODE); /* let's go! */
> - }
> + if (devpriv->ai_dma) /* let's go! */
> + outb(devpriv->mode_reg_int | 2, dev->iobase + PCL812_MODE);
> + else /* let's go! */
> + outb(devpriv->mode_reg_int | 6, dev->iobase + PCL812_MODE);
>
> #ifdef PCL812_EXTDEBUG
> - printk("pcl812 EDBG: END: pcl812_ai_cmd(...)\n");
> + printk(KERN_DEBUG "pcl812 EDBG: END: pcl812_ai_cmd(...)\n");
> #endif
>
> return 0;
> @@ -983,7 +1007,8 @@ static irqreturn_t interrupt_pcl812_ai_int(int
> irq, void *d)
>
> if (err) {
> printk
> - ("comedi%d: pcl812: (%s at 0x%lx) A/D cmd IRQ without DRDY!\n",
> + ("comedi%d: pcl812: (%s at 0x%lx) "
> + "A/D cmd IRQ without DRDY!\n",
> dev->minor, dev->board_name, dev->iobase);
> pcl812_ai_cancel(dev, s);
> s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
> @@ -1009,7 +1034,8 @@ static irqreturn_t interrupt_pcl812_ai_int(int
> irq, void *d)
> if (next_chan == 0) { /* one scan done */
> devpriv->ai_act_scan++;
> if (!(devpriv->ai_neverending))
> - if (devpriv->ai_act_scan >= devpriv->ai_scans) { /* all data sampled */
> + /* all data sampled */
> + if (devpriv->ai_act_scan >= devpriv->ai_scans) {
> pcl812_ai_cancel(dev, s);
> s->async->events |= COMEDI_CB_EOA;
> }
> @@ -1030,14 +1056,16 @@ static void transfer_from_dma_buf(struct
> comedi_device *dev,
>
> s->async->events = 0;
> for (i = len; i; i--) {
> - comedi_buf_put(s->async, ptr[bufptr++]); /* get one sample */
> + /* get one sample */
> + comedi_buf_put(s->async, ptr[bufptr++]);
>
> s->async->cur_chan++;
> if (s->async->cur_chan >= devpriv->ai_n_chan) {
> s->async->cur_chan = 0;
> devpriv->ai_act_scan++;
> if (!devpriv->ai_neverending)
> - if (devpriv->ai_act_scan >= devpriv->ai_scans) { /* all data sampled */
> + /* all data sampled */
> + if (devpriv->ai_act_scan >= devpriv->ai_scans) {
> pcl812_ai_cancel(dev, s);
> s->async->events |= COMEDI_CB_EOA;
> break;
> @@ -1060,7 +1088,7 @@ static irqreturn_t interrupt_pcl812_ai_dma(int
> irq, void *d)
> short *ptr;
>
> #ifdef PCL812_EXTDEBUG
> - printk("pcl812 EDBG: BGN: interrupt_pcl812_ai_dma(...)\n");
> + printk(KERN_DEBUG "pcl812 EDBG: BGN: interrupt_pcl812_ai_dma(...)\n");
> #endif
> ptr = (short *)devpriv->dmabuf[devpriv->next_dma_buf];
> len = (devpriv->dmabytestomove[devpriv->next_dma_buf] >> 1) -
> @@ -1095,7 +1123,7 @@ static irqreturn_t interrupt_pcl812_ai_dma(int
> irq, void *d)
> transfer_from_dma_buf(dev, s, ptr, bufptr, len);
>
> #ifdef PCL812_EXTDEBUG
> - printk("pcl812 EDBG: END: interrupt_pcl812_ai_dma(...)\n");
> + printk(KERN_DEBUG "pcl812 EDBG: END: interrupt_pcl812_ai_dma(...)\n");
> #endif
> return IRQ_HANDLED;
> }
> @@ -1111,11 +1139,10 @@ static irqreturn_t interrupt_pcl812(int irq, void *d)
> comedi_error(dev, "spurious interrupt");
> return IRQ_HANDLED;
> }
> - if (devpriv->ai_dma) {
> + if (devpriv->ai_dma)
> return interrupt_pcl812_ai_dma(irq, d);
> - } else {
> + else
> return interrupt_pcl812_ai_int(irq, d);
> - };
> }
>
> /*
> @@ -1132,7 +1159,8 @@ static int pcl812_ai_poll(struct comedi_device
> *dev, struct comedi_subdevice *s)
> spin_lock_irqsave(&dev->spinlock, flags);
>
> for (i = 0; i < 10; i++) {
> - top1 = get_dma_residue(devpriv->ai_dma); /* where is now DMA */
> + /* where is now DMA */
> + top1 = get_dma_residue(devpriv->ai_dma);
> top2 = get_dma_residue(devpriv->ai_dma);
> if (top1 == top2)
> break;
> @@ -1142,8 +1170,8 @@ static int pcl812_ai_poll(struct comedi_device
> *dev, struct comedi_subdevice *s)
> spin_unlock_irqrestore(&dev->spinlock, flags);
> return 0;
> }
> -
> - top1 = devpriv->dmabytestomove[1 - devpriv->next_dma_buf] - top1; /*
> where is now DMA in buffer */
> + /* where is now DMA in buffer */
> + top1 = devpriv->dmabytestomove[1 - devpriv->next_dma_buf] - top1;
> top1 >>= 1; /* sample position */
> top2 = top1 - devpriv->ai_poll_ptr;
> if (top2 < 1) { /* no new samples */
> @@ -1171,7 +1199,9 @@ static void setup_range_channel(struct comedi_device *dev,
> unsigned int rangechan, char wait)
> {
> unsigned char chan_reg = CR_CHAN(rangechan); /* normal board */
> - unsigned char gain_reg = CR_RANGE(rangechan) +
> devpriv->range_correction; /* gain index */
> + /* gain index */
> + unsigned char gain_reg = CR_RANGE(rangechan) +
> + devpriv->range_correction;
>
> if ((chan_reg == devpriv->old_chan_reg)
> && (gain_reg == devpriv->old_gain_reg))
> @@ -1184,20 +1214,25 @@ static void setup_range_channel(struct
> comedi_device *dev,
> if (devpriv->use_diff) {
> chan_reg = chan_reg | 0x30; /* DIFF inputs */
> } else {
> - if (chan_reg & 0x80) {
> - chan_reg = chan_reg | 0x20; /* SE inputs 8-15 */
> - } else {
> - chan_reg = chan_reg | 0x10; /* SE inputs 0-7 */
> - }
> + if (chan_reg & 0x80)
> + /* SE inputs 8-15 */
> + chan_reg = chan_reg | 0x20;
> + else
> + /* SE inputs 0-7 */
> + chan_reg = chan_reg | 0x10;
> }
> }
>
> outb(chan_reg, dev->iobase + PCL812_MUX); /* select channel */
> outb(gain_reg, dev->iobase + PCL812_GAIN); /* select gain */
>
> - if (wait) {
> - udelay(devpriv->max_812_ai_mode0_rangewait); /* XXX this depends
> on selected range and can be very long for some high gain ranges! */
> - }
> +
> + if (wait)
> + /*
> + * XXX this depends on selected range and can be very long for
> + * some high gain ranges!
> + */
> + udelay(devpriv->max_812_ai_mode0_rangewait);
> }
>
> /*
> @@ -1207,8 +1242,8 @@ static void start_pacer(struct comedi_device
> *dev, int mode,
> unsigned int divisor1, unsigned int divisor2)
> {
> #ifdef PCL812_EXTDEBUG
> - printk("pcl812 EDBG: BGN: start_pacer(%d,%u,%u)\n", mode, divisor1,
> - divisor2);
> + printk(KERN_DEBUG "pcl812 EDBG: BGN: start_pacer(%d,%u,%u)\n", mode,
> + divisor1, divisor2);
> #endif
> outb(0xb4, dev->iobase + PCL812_CTRCTL);
> outb(0x74, dev->iobase + PCL812_CTRCTL);
> @@ -1221,7 +1256,7 @@ static void start_pacer(struct comedi_device
> *dev, int mode,
> outb((divisor1 >> 8) & 0xff, dev->iobase + PCL812_CTR1);
> }
> #ifdef PCL812_EXTDEBUG
> - printk("pcl812 EDBG: END: start_pacer(...)\n");
> + printk(KERN_DEBUG "pcl812 EDBG: END: start_pacer(...)\n");
> #endif
> }
>
> @@ -1252,16 +1287,17 @@ static int pcl812_ai_cancel(struct comedi_device *dev,
> struct comedi_subdevice *s)
> {
> #ifdef PCL812_EXTDEBUG
> - printk("pcl812 EDBG: BGN: pcl812_ai_cancel(...)\n");
> + printk(KERN_DEBUG "pcl812 EDBG: BGN: pcl812_ai_cancel(...)\n");
> #endif
> if (devpriv->ai_dma)
> disable_dma(devpriv->dma);
> outb(0, dev->iobase + PCL812_CLRINT); /* clear INT request */
> - outb(devpriv->mode_reg_int | 0, dev->iobase + PCL812_MODE); /* Stop A/D */
> + /* Stop A/D */
> + outb(devpriv->mode_reg_int | 0, dev->iobase + PCL812_MODE);
> start_pacer(dev, -1, 0, 0); /* stop 8254 */
> outb(0, dev->iobase + PCL812_CLRINT); /* clear INT request */
> #ifdef PCL812_EXTDEBUG
> - printk("pcl812 EDBG: END: pcl812_ai_cancel(...)\n");
> + printk(KERN_DEBUG "pcl812 EDBG: END: pcl812_ai_cancel(...)\n");
> #endif
> return 0;
> }
> @@ -1272,7 +1308,7 @@ static int pcl812_ai_cancel(struct comedi_device *dev,
> static void pcl812_reset(struct comedi_device *dev)
> {
> #ifdef PCL812_EXTDEBUG
> - printk("pcl812 EDBG: BGN: pcl812_reset(...)\n");
> + printk(KERN_DEBUG "pcl812 EDBG: BGN: pcl812_reset(...)\n");
> #endif
> outb(0, dev->iobase + PCL812_MUX);
> outb(0 + devpriv->range_correction, dev->iobase + PCL812_GAIN);
> @@ -1304,7 +1340,7 @@ static void pcl812_reset(struct comedi_device *dev)
> }
> udelay(5);
> #ifdef PCL812_EXTDEBUG
> - printk("pcl812 EDBG: END: pcl812_reset(...)\n");
> + printk(KERN_DEBUG "pcl812 EDBG: END: pcl812_reset(...)\n");
> #endif
> }
>
> @@ -1322,8 +1358,8 @@ static int pcl812_attach(struct comedi_device
> *dev, struct comedi_devconfig *it)
> int n_subdevices;
>
> iobase = it->options[0];
> - printk("comedi%d: pcl812: board=%s, ioport=0x%03lx", dev->minor,
> - this_board->name, iobase);
> + printk(KERN_INFO "comedi%d: pcl812: board=%s, ioport=0x%03lx",
> + dev->minor, this_board->name, iobase);
>
> if (!request_region(iobase, this_board->io_range, "pcl812")) {
> printk("I/O port conflict\n");
> @@ -1345,18 +1381,18 @@ static int pcl812_attach(struct comedi_device
> *dev, struct comedi_devconfig *it)
> if (irq) { /* we want to use IRQ */
> if (((1 << irq) & this_board->IRQbits) == 0) {
> printk
> - (", IRQ %u is out of allowed range, DISABLING IT",
> - irq);
> + (", IRQ %u is out of allowed range, "
> + "DISABLING IT", irq);
> irq = 0; /* Bad IRQ */
> } else {
> if (request_irq
> (irq, interrupt_pcl812, 0, "pcl812", dev)) {
> printk
> - (", unable to allocate IRQ %u, DISABLING IT",
> - irq);
> + (", unable to allocate IRQ %u, "
> + "DISABLING IT", irq);
> irq = 0; /* Can't use IRQ */
> } else {
> - printk(", irq=%u", irq);
> + printk(KERN_INFO ", irq=%u", irq);
> }
> }
> }
> @@ -1376,16 +1412,20 @@ static int pcl812_attach(struct comedi_device
> *dev, struct comedi_devconfig *it)
> }
> ret = request_dma(dma, "pcl812");
> if (ret) {
> - printk(", unable to allocate DMA %u, FAIL!\n", dma);
> + printk(KERN_ERR ", unable to allocate DMA %u, FAIL!\n",
> + dma);
> return -EBUSY; /* DMA isn't free */
> }
> devpriv->dma = dma;
> - printk(", dma=%u", dma);
> + printk(KERN_INFO ", dma=%u", dma);
> pages = 1; /* we want 8KB */
> devpriv->dmabuf[0] = __get_dma_pages(GFP_KERNEL, pages);
> if (!devpriv->dmabuf[0]) {
> printk(", unable to allocate DMA buffer, FAIL!\n");
> - /* maybe experiment with try_to_free_pages() will help .... */
> + /*
> + * maybe experiment with try_to_free_pages()
> + * will help ....
> + */
> free_resources(dev);
> return -EBUSY; /* no buffer :-( */
> }
> @@ -1394,7 +1434,7 @@ static int pcl812_attach(struct comedi_device
> *dev, struct comedi_devconfig *it)
> devpriv->hwdmasize[0] = PAGE_SIZE * (1 << pages);
> devpriv->dmabuf[1] = __get_dma_pages(GFP_KERNEL, pages);
> if (!devpriv->dmabuf[1]) {
> - printk(", unable to allocate DMA buffer, FAIL!\n");
> + printk(KERN_ERR ", unable to allocate DMA buffer, FAIL!\n");
> free_resources(dev);
> return -EBUSY;
> }
> @@ -1457,11 +1497,11 @@ no_dma:
> s->maxdata = this_board->ai_maxdata;
> s->len_chanlist = MAX_CHANLIST_LEN;
> s->range_table = this_board->rangelist_ai;
> - if (this_board->board_type == boardACL8216) {
> + if (this_board->board_type == boardACL8216)
> s->insn_read = acl8216_ai_insn_read;
> - } else {
> + else
> s->insn_read = pcl812_ai_insn_read;
> - }
> +
> devpriv->use_MPC = this_board->haveMPC508;
> s->cancel = pcl812_ai_cancel;
> if (dev->irq) {
> @@ -1500,8 +1540,8 @@ no_dma:
> s->range_table = &range_bipolar10;
> break;
> printk
> - (", incorrect range number %d, changing to 0 (+/-10V)",
> - it->options[4]);
> + (", incorrect range number %d, changing "
> + "to 0 (+/-10V)", it->options[4]);
> break;
> }
> break;
> @@ -1530,8 +1570,8 @@ no_dma:
> s->range_table = &range_iso813_1_ai;
> break;
> printk
> - (", incorrect range number %d, changing to 0 ",
> - it->options[1]);
> + (", incorrect range number %d, "
> + "changing to 0 ", it->options[1]);
> break;
> }
> break;
> @@ -1555,8 +1595,8 @@ no_dma:
> s->range_table = &range_acl8113_1_ai;
> break;
> printk
> - (", incorrect range number %d, changing to 0 ",
> - it->options[1]);
> + (", incorrect range number %d, "
> + "changing to 0 ", it->options[1]);
> break;
> }
> break;
> @@ -1627,7 +1667,8 @@ no_dma:
> case boardACL8112:
> devpriv->max_812_ai_mode0_rangewait = 1;
> if (it->options[3] > 0)
> - devpriv->use_ext_trg = 1; /* we use external trigger */
> + /* we use external trigger */
> + devpriv->use_ext_trg = 1;
> case boardA821:
> devpriv->max_812_ai_mode0_rangewait = 1;
> devpriv->mode_reg_int = (irq << 4) & 0xf0;
> @@ -1636,11 +1677,12 @@ no_dma:
> case boardPCL813:
> case boardISO813:
> case boardACL8113:
> - devpriv->max_812_ai_mode0_rangewait = 5; /* maybe there must by
> greatest timeout */
> + /* maybe there must by greatest timeout */
> + devpriv->max_812_ai_mode0_rangewait = 5;
> break;
> }
>
> - printk("\n");
> + printk(KERN_INFO "\n");
> devpriv->valid = 1;
>
> pcl812_reset(dev);
> @@ -1655,7 +1697,7 @@ static int pcl812_detach(struct comedi_device *dev)
> {
>
> #ifdef PCL812_EXTDEBUG
> - printk("comedi%d: pcl812: remove\n", dev->minor);
> + printk(KERN_DEBUG "comedi%d: pcl812: remove\n", dev->minor);
> #endif
> free_resources(dev);
> return 0;
> --
> 1.5.4.3
--
-=( Ian Abbott @ MEV Ltd. E-mail: <abbotti@xxxxxxxxx> )=-
-=( Tel: +44 (0)161 477 1898 FAX: +44 (0)161 718 3587 )=-
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
