On Mon, Mar 22, 2010 at 03:17:27PM +0100, Lars Lindley wrote:
> I fixed the rest of the checkpatch.pl problems except long lines.
> I removed () from returns and added () to a macro.
> I removed a lot of unneccesary {}.
> Generated .o file is still identical to before.
>
> This patch applies after the 1/2 one.
>
Acked-by: Dan Carpenter <error27@xxxxxxxxx>
regards,
dan carpenter
> Signed-off-by: Lars Lindley <lindley@xxxxxxxxxx>
> ---
> drivers/staging/winbond/phy_calibration.c | 73 +++++++++++------------------
> 1 files changed, 28 insertions(+), 45 deletions(-)
>
> diff --git a/drivers/staging/winbond/phy_calibration.c b/drivers/staging/winbond/phy_calibration.c
> index e5df155..5e53af3 100644
> --- a/drivers/staging/winbond/phy_calibration.c
> +++ b/drivers/staging/winbond/phy_calibration.c
> @@ -18,7 +18,7 @@
>
> #define AG_CONST 0.6072529350
> #define FIXED(X) ((s32)((X) * 32768.0))
> -#define DEG2RAD(X) 0.017453 * (X)
> +#define DEG2RAD(X) (0.017453 * (X))
>
> /****************** LOCAL TYPE DEFINITION SECTION ***************************/
> typedef s32 fixed; /* 16.16 fixed-point */
> @@ -46,22 +46,20 @@ s32 _s13_to_s32(u32 data)
>
> val = (data & 0x0FFF);
>
> - if ((data & BIT(12)) != 0) {
> + if ((data & BIT(12)) != 0)
> val |= 0xFFFFF000;
> - }
>
> - return ((s32) val);
> + return (s32) val;
> }
>
> u32 _s32_to_s13(s32 data)
> {
> u32 val;
>
> - if (data > 4095) {
> + if (data > 4095)
> data = 4095;
> - } else if (data < -4096) {
> + else if (data < -4096)
> data = -4096;
> - }
>
> val = data & 0x1FFF;
>
> @@ -75,9 +73,8 @@ s32 _s4_to_s32(u32 data)
>
> val = (data & 0x0007);
>
> - if ((data & BIT(3)) != 0) {
> + if ((data & BIT(3)) != 0)
> val |= 0xFFFFFFF8;
> - }
>
> return val;
> }
> @@ -86,11 +83,10 @@ u32 _s32_to_s4(s32 data)
> {
> u32 val;
>
> - if (data > 7) {
> + if (data > 7)
> data = 7;
> - } else if (data < -8) {
> + else if (data < -8)
> data = -8;
> - }
>
> val = data & 0x000F;
>
> @@ -104,9 +100,8 @@ s32 _s5_to_s32(u32 data)
>
> val = (data & 0x000F);
>
> - if ((data & BIT(4)) != 0) {
> + if ((data & BIT(4)) != 0)
> val |= 0xFFFFFFF0;
> - }
>
> return val;
> }
> @@ -115,11 +110,10 @@ u32 _s32_to_s5(s32 data)
> {
> u32 val;
>
> - if (data > 15) {
> + if (data > 15)
> data = 15;
> - } else if (data < -16) {
> + else if (data < -16)
> data = -16;
> - }
>
> val = data & 0x001F;
>
> @@ -133,9 +127,8 @@ s32 _s6_to_s32(u32 data)
>
> val = (data & 0x001F);
>
> - if ((data & BIT(5)) != 0) {
> + if ((data & BIT(5)) != 0)
> val |= 0xFFFFFFE0;
> - }
>
> return val;
> }
> @@ -144,11 +137,10 @@ u32 _s32_to_s6(s32 data)
> {
> u32 val;
>
> - if (data > 31) {
> + if (data > 31)
> data = 31;
> - } else if (data < -32) {
> + else if (data < -32)
> data = -32;
> - }
>
> val = data & 0x003F;
>
> @@ -162,9 +154,8 @@ s32 _s9_to_s32(u32 data)
>
> val = data & 0x00FF;
>
> - if ((data & BIT(8)) != 0) {
> + if ((data & BIT(8)) != 0)
> val |= 0xFFFFFF00;
> - }
>
> return val;
> }
> @@ -173,11 +164,10 @@ u32 _s32_to_s9(s32 data)
> {
> u32 val;
>
> - if (data > 255) {
> + if (data > 255)
> data = 255;
> - } else if (data < -256) {
> + else if (data < -256)
> data = -256;
> - }
>
> val = data & 0x01FF;
>
> @@ -187,13 +177,12 @@ u32 _s32_to_s9(s32 data)
> /****************************************************************************/
> s32 _floor(s32 n)
> {
> - if (n > 0) {
> + if (n > 0)
> n += 5;
> - } else {
> + else
> n -= 5;
> - }
>
> - return (n/10);
> + return n / 10;
> }
>
> /*
> @@ -330,11 +319,10 @@ void _reset_rx_cal(struct hw_data *phw_data)
>
> hw_get_dxx_reg(phw_data, 0x54, &val);
>
> - if (phw_data->revision == 0x2002) { /* 1st-cut */
> + if (phw_data->revision == 0x2002) /* 1st-cut */
> val &= 0xFFFF0000;
> - } else { /* 2nd-cut */
> + else /* 2nd-cut */
> val &= 0x000003FF;
> - }
>
> hw_set_dxx_reg(phw_data, 0x54, val);
> }
> @@ -525,9 +513,8 @@ void _txidac_dc_offset_cancellation_winbond(struct hw_data *phw_data)
> if (mag_0 != mag_1) {
> fix_cancel_dc_i = (mag_0 * 10000) / (mag_0 * 10000 - mag_1 * 10000);
> } else {
> - if (mag_0 == mag_1) {
> + if (mag_0 == mag_1)
> PHY_DEBUG(("[CAL] ***** mag_0 = mag_1 !!\n"));
> - }
>
> fix_cancel_dc_i = 0;
> }
> @@ -535,9 +522,8 @@ void _txidac_dc_offset_cancellation_winbond(struct hw_data *phw_data)
> PHY_DEBUG(("[CAL] ** fix_cancel_dc_i = %d (0x%04X)\n",
> fix_cancel_dc_i, _s32_to_s5(fix_cancel_dc_i)));
>
> - if ((abs(mag_1 - mag_0) * 6) > mag_0) {
> + if ((abs(mag_1 - mag_0) * 6) > mag_0)
> break;
> - }
> }
>
> if (loop >= 19)
> @@ -641,9 +627,8 @@ void _txqdac_dc_offset_cacellation_winbond(struct hw_data *phw_data)
> if (mag_0 != mag_1) {
> fix_cancel_dc_q = (mag_0*10000) / (mag_0*10000 - mag_1*10000);
> } else {
> - if (mag_0 == mag_1) {
> + if (mag_0 == mag_1)
> PHY_DEBUG(("[CAL] ***** mag_0 = mag_1 !!\n"));
> - }
>
> fix_cancel_dc_q = 0;
> }
> @@ -651,9 +636,8 @@ void _txqdac_dc_offset_cacellation_winbond(struct hw_data *phw_data)
> PHY_DEBUG(("[CAL] ** fix_cancel_dc_q = %d (0x%04X)\n",
> fix_cancel_dc_q, _s32_to_s5(fix_cancel_dc_q)));
>
> - if ((abs(mag_1 - mag_0) * 6) > mag_0) {
> + if ((abs(mag_1 - mag_0) * 6) > mag_0)
> break;
> - }
> }
>
> if (loop >= 19)
> @@ -834,11 +818,10 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
> /* 1280 * 32768 = 41943040 */
> temp1 = (41943040 / cos_2b) * cos_b;
>
> - if (phw_data->revision == 0x2002) { /* 1st-cut */
> + if (phw_data->revision == 0x2002) /* 1st-cut */
> temp2 = (41943040 / cos_2b) * sin_b * (-1);
> - } else { /* 2nd-cut */
> + else /* 2nd-cut */
> temp2 = (41943040 * 4 / cos_2b) * sin_b * (-1);
> - }
>
> tx_cal_flt_b[0] = _floor(temp1 / (32768 + a_2));
> tx_cal_flt_b[1] = _floor(temp2 / (32768 + a_2));
> --
> 1.7.0.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
