I fixed the rest of the checkpatch.pl problems except long lines.
I removed () from returns and added () to a macro.
I removed a lot of unneccesary {}.
Generated .o file is still identical to before.
This patch applies after the 1/2 one.
Signed-off-by: Lars Lindley <lindley@xxxxxxxxxx>
---
drivers/staging/winbond/phy_calibration.c | 73 +++++++++++------------------
1 files changed, 28 insertions(+), 45 deletions(-)
diff --git a/drivers/staging/winbond/phy_calibration.c b/drivers/staging/winbond/phy_calibration.c
index e5df155..5e53af3 100644
--- a/drivers/staging/winbond/phy_calibration.c
+++ b/drivers/staging/winbond/phy_calibration.c
@@ -18,7 +18,7 @@
#define AG_CONST 0.6072529350
#define FIXED(X) ((s32)((X) * 32768.0))
-#define DEG2RAD(X) 0.017453 * (X)
+#define DEG2RAD(X) (0.017453 * (X))
/****************** LOCAL TYPE DEFINITION SECTION ***************************/
typedef s32 fixed; /* 16.16 fixed-point */
@@ -46,22 +46,20 @@ s32 _s13_to_s32(u32 data)
val = (data & 0x0FFF);
- if ((data & BIT(12)) != 0) {
+ if ((data & BIT(12)) != 0)
val |= 0xFFFFF000;
- }
- return ((s32) val);
+ return (s32) val;
}
u32 _s32_to_s13(s32 data)
{
u32 val;
- if (data > 4095) {
+ if (data > 4095)
data = 4095;
- } else if (data < -4096) {
+ else if (data < -4096)
data = -4096;
- }
val = data & 0x1FFF;
@@ -75,9 +73,8 @@ s32 _s4_to_s32(u32 data)
val = (data & 0x0007);
- if ((data & BIT(3)) != 0) {
+ if ((data & BIT(3)) != 0)
val |= 0xFFFFFFF8;
- }
return val;
}
@@ -86,11 +83,10 @@ u32 _s32_to_s4(s32 data)
{
u32 val;
- if (data > 7) {
+ if (data > 7)
data = 7;
- } else if (data < -8) {
+ else if (data < -8)
data = -8;
- }
val = data & 0x000F;
@@ -104,9 +100,8 @@ s32 _s5_to_s32(u32 data)
val = (data & 0x000F);
- if ((data & BIT(4)) != 0) {
+ if ((data & BIT(4)) != 0)
val |= 0xFFFFFFF0;
- }
return val;
}
@@ -115,11 +110,10 @@ u32 _s32_to_s5(s32 data)
{
u32 val;
- if (data > 15) {
+ if (data > 15)
data = 15;
- } else if (data < -16) {
+ else if (data < -16)
data = -16;
- }
val = data & 0x001F;
@@ -133,9 +127,8 @@ s32 _s6_to_s32(u32 data)
val = (data & 0x001F);
- if ((data & BIT(5)) != 0) {
+ if ((data & BIT(5)) != 0)
val |= 0xFFFFFFE0;
- }
return val;
}
@@ -144,11 +137,10 @@ u32 _s32_to_s6(s32 data)
{
u32 val;
- if (data > 31) {
+ if (data > 31)
data = 31;
- } else if (data < -32) {
+ else if (data < -32)
data = -32;
- }
val = data & 0x003F;
@@ -162,9 +154,8 @@ s32 _s9_to_s32(u32 data)
val = data & 0x00FF;
- if ((data & BIT(8)) != 0) {
+ if ((data & BIT(8)) != 0)
val |= 0xFFFFFF00;
- }
return val;
}
@@ -173,11 +164,10 @@ u32 _s32_to_s9(s32 data)
{
u32 val;
- if (data > 255) {
+ if (data > 255)
data = 255;
- } else if (data < -256) {
+ else if (data < -256)
data = -256;
- }
val = data & 0x01FF;
@@ -187,13 +177,12 @@ u32 _s32_to_s9(s32 data)
/****************************************************************************/
s32 _floor(s32 n)
{
- if (n > 0) {
+ if (n > 0)
n += 5;
- } else {
+ else
n -= 5;
- }
- return (n/10);
+ return n / 10;
}
/*
@@ -330,11 +319,10 @@ void _reset_rx_cal(struct hw_data *phw_data)
hw_get_dxx_reg(phw_data, 0x54, &val);
- if (phw_data->revision == 0x2002) { /* 1st-cut */
+ if (phw_data->revision == 0x2002) /* 1st-cut */
val &= 0xFFFF0000;
- } else { /* 2nd-cut */
+ else /* 2nd-cut */
val &= 0x000003FF;
- }
hw_set_dxx_reg(phw_data, 0x54, val);
}
@@ -525,9 +513,8 @@ void _txidac_dc_offset_cancellation_winbond(struct hw_data *phw_data)
if (mag_0 != mag_1) {
fix_cancel_dc_i = (mag_0 * 10000) / (mag_0 * 10000 - mag_1 * 10000);
} else {
- if (mag_0 == mag_1) {
+ if (mag_0 == mag_1)
PHY_DEBUG(("[CAL] ***** mag_0 = mag_1 !!\n"));
- }
fix_cancel_dc_i = 0;
}
@@ -535,9 +522,8 @@ void _txidac_dc_offset_cancellation_winbond(struct hw_data *phw_data)
PHY_DEBUG(("[CAL] ** fix_cancel_dc_i = %d (0x%04X)\n",
fix_cancel_dc_i, _s32_to_s5(fix_cancel_dc_i)));
- if ((abs(mag_1 - mag_0) * 6) > mag_0) {
+ if ((abs(mag_1 - mag_0) * 6) > mag_0)
break;
- }
}
if (loop >= 19)
@@ -641,9 +627,8 @@ void _txqdac_dc_offset_cacellation_winbond(struct hw_data *phw_data)
if (mag_0 != mag_1) {
fix_cancel_dc_q = (mag_0*10000) / (mag_0*10000 - mag_1*10000);
} else {
- if (mag_0 == mag_1) {
+ if (mag_0 == mag_1)
PHY_DEBUG(("[CAL] ***** mag_0 = mag_1 !!\n"));
- }
fix_cancel_dc_q = 0;
}
@@ -651,9 +636,8 @@ void _txqdac_dc_offset_cacellation_winbond(struct hw_data *phw_data)
PHY_DEBUG(("[CAL] ** fix_cancel_dc_q = %d (0x%04X)\n",
fix_cancel_dc_q, _s32_to_s5(fix_cancel_dc_q)));
- if ((abs(mag_1 - mag_0) * 6) > mag_0) {
+ if ((abs(mag_1 - mag_0) * 6) > mag_0)
break;
- }
}
if (loop >= 19)
@@ -834,11 +818,10 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
/* 1280 * 32768 = 41943040 */
temp1 = (41943040 / cos_2b) * cos_b;
- if (phw_data->revision == 0x2002) { /* 1st-cut */
+ if (phw_data->revision == 0x2002) /* 1st-cut */
temp2 = (41943040 / cos_2b) * sin_b * (-1);
- } else { /* 2nd-cut */
+ else /* 2nd-cut */
temp2 = (41943040 * 4 / cos_2b) * sin_b * (-1);
- }
tx_cal_flt_b[0] = _floor(temp1 / (32768 + a_2));
tx_cal_flt_b[1] = _floor(temp2 / (32768 + a_2));
--
1.7.0.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
