[ 0.177249] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.177251] pci 0000:00:1d.3: Performing full reset [ 0.177336] Trying to unpack rootfs image as initramfs... [ 0.245071] Freeing initrd memory: 3154k freed [ 0.246584] khelper used greatest stack depth: 7104 bytes left [ 0.247422] microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa1 [ 0.247426] microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa1 [ 0.247464] Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 0.247466] Scanning for low memory corruption every 60 seconds [ 0.247723] audit: initializing netlink socket (disabled) [ 0.247737] type=2000 audit(1259946370.246:1): initialized [ 0.259875] highmem bounce pool size: 64 pages [ 0.259880] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.262308] VFS: Disk quotas dquot_6.5.2 [ 0.262379] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.263074] msgmni has been set to 1725 [ 0.263171] SELinux: Registering netfilter hooks [ 0.263333] cryptomgr_test used greatest stack depth: 6964 bytes left [ 0.263494] alg: No test for stdrng (krng) [ 0.263584] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.263587] io scheduler noop registered [ 0.263588] io scheduler anticipatory registered [ 0.263590] io scheduler deadline registered [ 0.263644] io scheduler cfq registered (default) [ 0.263766] alloc irq_desc for 24 on node -1 [ 0.263768] alloc kstat_irqs on node -1 [ 0.263776] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.263784] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.263996] alloc irq_desc for 25 on node -1 [ 0.263998] alloc kstat_irqs on node -1 [ 0.264004] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.264011] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.264201] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.264466] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.264469] ACPI: Power Button [PWRB] [ 0.264535] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.264537] ACPI: Power Button [PWRF] [ 0.264697] processor LNXCPU:00: registered as cooling_device0 [ 0.264748] processor LNXCPU:01: registered as cooling_device1 [ 0.269998] Non-volatile memory driver v1.3 [ 0.270103] intel_rng: FWH not detected [ 0.270142] Linux agpgart interface v0.103 [ 0.270197] agpgart-intel 0000:00:00.0: Intel G33 Chipset [ 0.270726] agpgart-intel 0000:00:00.0: detected 7164K stolen memory [ 0.273767] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.273854] [drm] Initialized drm 1.1.0 20060810 [ 0.273903] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.273907] pci 0000:00:02.0: setting latency timer to 64 [ 0.278670] alloc irq_desc for 26 on node -1 [ 0.278673] alloc kstat_irqs on node -1 [ 0.278681] pci 0000:00:02.0: irq 26 for MSI/MSI-X [ 0.278779] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 0.278812] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.525414] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.771872] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.772205] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.772425] 00:0e: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.773987] brd: module loaded [ 0.774711] khelper used greatest stack depth: 6888 bytes left [ 0.774716] loop: module loaded [ 0.774777] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.775044] ata_piix 0000:00:1f.1: version 2.13 [ 0.775057] alloc irq_desc for 18 on node -1 [ 0.775058] alloc kstat_irqs on node -1 [ 0.775063] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.775093] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.775147] scsi0 : ata_piix [ 0.775243] scsi1 : ata_piix [ 0.776405] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.776408] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.776446] alloc irq_desc for 19 on node -1 [ 0.776448] alloc kstat_irqs on node -1 [ 0.776452] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.776460] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.776489] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.776527] scsi2 : ata_piix [ 0.776632] scsi3 : ata_piix [ 0.777924] ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19 [ 0.777927] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19 [ 0.778207] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI [ 0.778209] Copyright (c) 1999-2006 Intel Corporation. [ 0.778244] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 0.778245] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 0.778312] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.778314] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.778411] sky2 driver version 1.25 [ 0.778516] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.778531] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.778560] r8169 0000:02:00.0: setting latency timer to 64 [ 0.778598] alloc irq_desc for 27 on node -1 [ 0.778600] alloc kstat_irqs on node -1 [ 0.778610] r8169 0000:02:00.0: irq 27 for MSI/MSI-X [ 0.778839] eth0: RTL8168c/8111c at 0xf804e000, 00:1d:92:ee:03:df, XID 1c2000c0 IRQ 27 [ 0.782257] console [netcon0] enabled [ 0.782259] netconsole: network logging started [ 0.782392] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.782395] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 [ 0.782412] alloc irq_desc for 23 on node -1 [ 0.782413] alloc kstat_irqs on node -1 [ 0.782417] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.782425] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.782428] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.782445] drivers/usb/core/inode.c: creating file 'devices' [ 0.782448] drivers/usb/core/inode.c: creating file '001' [ 0.782495] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.782502] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 [ 0.782505] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 0.782516] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.782525] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.782529] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.786413] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.786415] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 0.786426] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfea77c00 [ 0.786430] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.790318] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 0.795829] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.795878] usb usb1: default language 0x0409 [ 0.795890] usb usb1: udev 1, busnum 1, minor = 0 [ 0.795894] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.795898] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.795902] usb usb1: Product: EHCI Host Controller [ 0.795905] usb usb1: Manufacturer: Linux 2.6.32 ehci_hcd [ 0.795909] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.795945] usb usb1: uevent [ 0.795976] usb usb1: usb_probe_device [ 0.795978] usb usb1: configuration #1 chosen from 1 choice [ 0.795984] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.795996] usb 1-0:1.0: uevent [ 0.796024] hub 1-0:1.0: usb_probe_interface [ 0.796026] hub 1-0:1.0: usb_probe_interface - got id [ 0.796027] hub 1-0:1.0: USB hub found [ 0.796033] hub 1-0:1.0: 8 ports detected [ 0.796035] hub 1-0:1.0: standalone hub [ 0.796036] hub 1-0:1.0: no power switching (usb 1.0) [ 0.796038] hub 1-0:1.0: individual port over-current protection [ 0.796040] hub 1-0:1.0: power on to power good time: 20ms [ 0.796043] hub 1-0:1.0: local power source is good [ 0.796045] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 0.796073] drivers/usb/core/inode.c: creating file '001' [ 0.796117] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.796119] ohci_hcd: block sizes: ed 64 td 64 [ 0.796152] uhci_hcd: USB Universal Host Controller Interface driver [ 0.796180] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.796186] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.796188] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.796193] drivers/usb/core/inode.c: creating file '002' [ 0.796233] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.796239] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.796243] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.796245] uhci_hcd 0000:00:1d.0: Performing full reset [ 0.796257] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 0.796261] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880 [ 0.796283] usb usb2: default language 0x0409 [ 0.796289] usb usb2: udev 1, busnum 2, minor = 128 [ 0.796291] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.796293] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.796295] usb usb2: Product: UHCI Host Controller [ 0.796297] usb usb2: Manufacturer: Linux 2.6.32 uhci_hcd [ 0.796299] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.796329] usb usb2: uevent [ 0.796355] usb usb2: usb_probe_device [ 0.796357] usb usb2: configuration #1 chosen from 1 choice [ 0.796362] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 0.796375] usb 2-0:1.0: uevent [ 0.796402] hub 2-0:1.0: usb_probe_interface [ 0.796404] hub 2-0:1.0: usb_probe_interface - got id [ 0.796406] hub 2-0:1.0: USB hub found [ 0.796410] hub 2-0:1.0: 2 ports detected [ 0.796412] hub 2-0:1.0: standalone hub [ 0.796413] hub 2-0:1.0: no power switching (usb 1.0) [ 0.796415] hub 2-0:1.0: individual port over-current protection [ 0.796416] hub 2-0:1.0: power on to power good time: 2ms [ 0.796420] hub 2-0:1.0: local power source is good [ 0.796421] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 0.796433] drivers/usb/core/inode.c: creating file '001' [ 0.796458] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.796463] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.796466] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.796470] drivers/usb/core/inode.c: creating file '003' [ 0.796510] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.796516] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.796519] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.796521] uhci_hcd 0000:00:1d.1: Performing full reset [ 0.796533] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 0.796537] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800 [ 0.796559] usb usb3: default language 0x0409 [ 0.796564] usb usb3: udev 1, busnum 3, minor = 256 [ 0.796566] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.796568] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.796570] usb usb3: Product: UHCI Host Controller [ 0.796572] usb usb3: Manufacturer: Linux 2.6.32 uhci_hcd [ 0.796575] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.796605] usb usb3: uevent [ 0.796633] usb usb3: usb_probe_device [ 0.796635] usb usb3: configuration #1 chosen from 1 choice [ 0.796639] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 0.796651] usb 3-0:1.0: uevent [ 0.796678] hub 3-0:1.0: usb_probe_interface [ 0.796680] hub 3-0:1.0: usb_probe_interface - got id [ 0.796682] hub 3-0:1.0: USB hub found [ 0.796686] hub 3-0:1.0: 2 ports detected [ 0.796688] hub 3-0:1.0: standalone hub [ 0.796689] hub 3-0:1.0: no power switching (usb 1.0) [ 0.796690] hub 3-0:1.0: individual port over-current protection [ 0.796692] hub 3-0:1.0: power on to power good time: 2ms [ 0.796695] hub 3-0:1.0: local power source is good [ 0.796697] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 0.796709] drivers/usb/core/inode.c: creating file '001' [ 0.796735] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.796740] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.796743] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.796749] drivers/usb/core/inode.c: creating file '004' [ 0.796791] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.796800] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.796803] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.796805] uhci_hcd 0000:00:1d.2: Performing full reset [ 0.796817] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 0.796829] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480 [ 0.796852] usb usb4: default language 0x0409 [ 0.796857] usb usb4: udev 1, busnum 4, minor = 384 [ 0.796859] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.796861] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.796863] usb usb4: Product: UHCI Host Controller [ 0.796866] usb usb4: Manufacturer: Linux 2.6.32 uhci_hcd [ 0.796868] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.796899] usb usb4: uevent [ 0.796926] usb usb4: usb_probe_device [ 0.796928] usb usb4: configuration #1 chosen from 1 choice [ 0.796933] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 0.796944] usb 4-0:1.0: uevent [ 0.796973] hub 4-0:1.0: usb_probe_interface [ 0.796974] hub 4-0:1.0: usb_probe_interface - got id [ 0.796976] hub 4-0:1.0: USB hub found [ 0.796981] hub 4-0:1.0: 2 ports detected [ 0.796982] hub 4-0:1.0: standalone hub [ 0.796984] hub 4-0:1.0: no power switching (usb 1.0) [ 0.796985] hub 4-0:1.0: individual port over-current protection [ 0.796987] hub 4-0:1.0: power on to power good time: 2ms [ 0.796990] hub 4-0:1.0: local power source is good [ 0.796992] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 0.797004] drivers/usb/core/inode.c: creating file '001' [ 0.797030] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.797035] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.797038] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.797042] drivers/usb/core/inode.c: creating file '005' [ 0.797085] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.797091] uhci_hcd 0000:00:1d.3: detected 2 ports [ 0.797094] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.797096] uhci_hcd 0000:00:1d.3: Performing full reset [ 0.797108] uhci_hcd 0000:00:1d.3: supports USB remote wakeup [ 0.797119] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400 [ 0.797141] usb usb5: default language 0x0409 [ 0.797146] usb usb5: udev 1, busnum 5, minor = 512 [ 0.797148] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.797150] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.797152] usb usb5: Product: UHCI Host Controller [ 0.797154] usb usb5: Manufacturer: Linux 2.6.32 uhci_hcd [ 0.797157] usb usb5: SerialNumber: 0000:00:1d.3 [ 0.797185] usb usb5: uevent [ 0.797213] usb usb5: usb_probe_device [ 0.797215] usb usb5: configuration #1 chosen from 1 choice [ 0.797220] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 0.797231] usb 5-0:1.0: uevent [ 0.797259] hub 5-0:1.0: usb_probe_interface [ 0.797261] hub 5-0:1.0: usb_probe_interface - got id [ 0.797262] hub 5-0:1.0: USB hub found [ 0.797267] hub 5-0:1.0: 2 ports detected [ 0.797268] hub 5-0:1.0: standalone hub [ 0.797270] hub 5-0:1.0: no power switching (usb 1.0) [ 0.797271] hub 5-0:1.0: individual port over-current protection [ 0.797273] hub 5-0:1.0: power on to power good time: 2ms [ 0.797276] hub 5-0:1.0: local power source is good [ 0.797278] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 0.797290] drivers/usb/core/inode.c: creating file '001' [ 0.797372] usbcore: registered new interface driver usblp [ 0.797374] Initializing USB Mass Storage driver... [ 0.797415] usbcore: registered new interface driver usb-storage [ 0.797418] USB Mass Storage support registered. [ 0.797459] usbcore: registered new interface driver libusual [ 0.797540] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.797542] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.798235] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.798362] mice: PS/2 mouse device common for all mice [ 0.798584] Driver 'rtc_cmos' needs updating - please use bus_type methods [ 0.798603] rtc_cmos 00:03: RTC can wake from S4 [ 0.798652] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.798673] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.798718] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.798985] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 0.799071] cpuidle: using governor ladder [ 0.799072] cpuidle: using governor menu [ 0.800036] usbcore: registered new interface driver hiddev [ 0.800071] usbcore: registered new interface driver usbhid [ 0.800074] usbhid: v2.6:USB HID core driver [ 0.800188] Advanced Linux Sound Architecture Driver Version 1.0.21. [ 0.800994] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.801013] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 0.819812] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.833274] hda_codec: ALC888: BIOS auto-probing. [ 0.838262] ALSA device list: [ 0.838264] #0: HDA Intel at 0xfea78000 irq 16 [ 0.838312] Netfilter messages via NETLINK v0.30. [ 0.838327] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 0.838526] ctnetlink v0.93: registering with nfnetlink. [ 0.839084] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.839108] TCP cubic registered [ 0.839110] Initializing XFRM netlink socket [ 0.839355] NET: Registered protocol family 10 [ 0.840290] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 0.840342] IPv6 over IPv4 tunneling driver [ 0.840904] NET: Registered protocol family 17 [ 0.840946] Using IPI No-Shortcut mode [ 0.841069] PM: Resume from disk failed. [ 0.841080] registered taskstats version 1 [ 0.841321] Magic number: 5:205:137 [ 0.841341] block ram2: hash matches [ 0.896740] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001403 POWER sig=k CSC CONNECT [ 0.896746] hub 1-0:1.0: port 3: status 0501 change 0001 [ 0.896784] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.896789] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 [ 0.897746] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.897758] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.949789] ata1.00: ATAPI: ATAPI DVD A DH20A4P, 9P59, max UDMA/66 [ 0.949811] ata1.00: limited to UDMA/33 due to 40-wire cable [ 0.949931] ata3.00: ATA-8: WDC WD3200AAJS-22B4A0, 01.03A01, max UDMA/133 [ 0.949934] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.956380] ata3.00: configured for UDMA/133 [ 0.971437] ata1.00: configured for UDMA/33 [ 0.973210] scsi 0:0:0:0: CD-ROM ATAPI DVD A DH20A4P 9P59 PQ: 0 ANSI: 5 [ 0.978397] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.978402] Uniform CD-ROM driver Revision: 3.20 [ 0.978537] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.978616] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.978723] scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAJS-2 01.0 PQ: 0 ANSI: 5 [ 0.978876] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 0.978911] sd 2:0:0:0: [sda] Write Protect is off [ 0.978913] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.978931] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.979059] sda: [ 0.979135] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 0.993352] sda1 sda2 sda3 sda4 < sda5 [ 1.013721] hub 1-0:1.0: state 7 ports 8 chg 0008 evt 0000 [ 1.013732] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s [ 1.013742] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion [ 1.021344] sda6 sda7 sda8 sda9 sda10 [ 1.065215] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC [ 1.065238] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 1.065247] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 [ 1.065255] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s [ 1.065927] sda11 sda12 sda13 > [ 1.094805] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.094821] Freeing unused kernel memory: 396k freed [ 1.094969] Write protecting the kernel text: 4428k [ 1.094998] Write protecting the kernel read-only data: 2168k [ 1.146029] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 [ 1.248026] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 1.389473] usb 3-1: skipped 1 descriptor after interface [ 1.394466] usb 3-1: default language 0x0409 [ 1.410466] usb 3-1: udev 2, busnum 3, minor = 257 [ 1.410470] usb 3-1: New USB device found, idVendor=046d, idProduct=c018 [ 1.410475] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.410479] usb 3-1: Product: USB Optical Mouse [ 1.410482] usb 3-1: Manufacturer: Logitech [ 1.410564] usb 3-1: uevent [ 1.410642] usb 3-1: usb_probe_device [ 1.410646] usb 3-1: configuration #1 chosen from 1 choice [ 1.413466] usb 3-1: adding 3-1:1.0 (config #1, interface 0) [ 1.413491] usb 3-1:1.0: uevent [ 1.413570] usbhid 3-1:1.0: usb_probe_interface [ 1.413574] usbhid 3-1:1.0: usb_probe_interface - got id [ 1.426735] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input4 [ 1.426860] generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-1/input0 [ 1.426880] drivers/usb/core/inode.c: creating file '002' [ 1.426895] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008 [ 1.954030] usb usb2: suspend_rh (auto-stop) [ 1.954053] usb usb4: suspend_rh (auto-stop) [ 1.954074] usb usb5: suspend_rh (auto-stop) [ 1.956023] async/0 used greatest stack depth: 6520 bytes left [ 3.117877] kjournald starting. Commit interval 5 seconds [ 3.117886] EXT3-fs: mounted filesystem with writeback data mode. [ 3.206015] SELinux: Disabled at runtime. [ 3.206060] SELinux: Unregistering netfilter hooks [ 3.218025] type=1404 audit(1259946373.218:2): selinux=0 auid=4294967295 ses=4294967295 [ 3.647728] sh used greatest stack depth: 6056 bytes left [ 3.704029] hub 2-0:1.0: hub_suspend [ 3.704038] usb usb2: bus auto-suspend [ 3.704042] usb usb2: suspend_rh [ 3.704060] hub 4-0:1.0: hub_suspend [ 3.704065] usb usb4: bus auto-suspend [ 3.704069] usb usb4: suspend_rh [ 3.704085] hub 5-0:1.0: hub_suspend [ 3.704089] usb usb5: bus auto-suspend [ 3.704092] usb usb5: suspend_rh [ 3.704108] hub 1-0:1.0: hub_suspend [ 3.704113] usb usb1: bus auto-suspend [ 3.704116] ehci_hcd 0000:00:1d.7: suspend root hub [ 4.599141] udev: starting version 145 [ 4.633745] usb usb2: uevent [ 4.633807] usb 2-0:1.0: uevent [ 4.633988] usb usb3: uevent [ 4.634049] usb 3-0:1.0: uevent [ 4.634113] usb 3-1: uevent [ 4.634179] usb 3-1:1.0: uevent [ 4.634681] usb usb4: uevent [ 4.634742] usb 4-0:1.0: uevent [ 4.634916] usb usb5: uevent [ 4.634977] usb 5-0:1.0: uevent [ 4.635158] usb usb1: uevent [ 4.635216] usb 1-0:1.0: uevent [ 4.705325] usb usb2: uevent [ 4.707452] usb usb3: uevent [ 4.709259] usb usb5: uevent [ 4.709878] usb usb1: uevent [ 4.749858] usb 3-1: uevent [ 4.754620] usb usb4: uevent [ 4.887394] usb 3-1:1.0: uevent [ 4.887644] usb 3-1: uevent [ 4.887737] usb 3-1:1.0: uevent [ 4.887855] usb 3-1: uevent [ 4.909032] usb 3-1:1.0: uevent [ 4.910302] usb 3-1:1.0: uevent [ 6.194674] ip used greatest stack depth: 5856 bytes left [ 9.063687] EXT3 FS on sda3, internal journal [ 9.387958] kjournald starting. Commit interval 5 seconds [ 9.388187] EXT3 FS on sda2, internal journal [ 9.388194] EXT3-fs: mounted filesystem with writeback data mode. [ 9.401329] kjournald starting. Commit interval 5 seconds [ 9.401593] EXT3 FS on sda7, internal journal [ 9.401600] EXT3-fs: mounted filesystem with writeback data mode. [ 9.460349] kjournald starting. Commit interval 5 seconds [ 9.460581] EXT3 FS on sda5, internal journal [ 9.460588] EXT3-fs: mounted filesystem with writeback data mode. [ 9.495265] kjournald starting. Commit interval 5 seconds [ 9.495495] EXT3 FS on sda6, internal journal [ 9.495501] EXT3-fs: mounted filesystem with writeback data mode. [ 9.526389] kjournald starting. Commit interval 5 seconds [ 9.526634] EXT3 FS on sda11, internal journal [ 9.526640] EXT3-fs: mounted filesystem with writeback data mode. [ 9.561142] kjournald starting. Commit interval 5 seconds [ 9.561380] EXT3 FS on sda13, internal journal [ 9.561386] EXT3-fs: mounted filesystem with writeback data mode. [ 9.589889] kjournald starting. Commit interval 5 seconds [ 9.590119] EXT3 FS on sda10, internal journal [ 9.590125] EXT3-fs: mounted filesystem with writeback data mode. [ 9.613423] kjournald starting. Commit interval 5 seconds [ 9.613666] EXT3 FS on sda12, internal journal [ 9.613672] EXT3-fs: mounted filesystem with writeback data mode. [ 10.241482] Adding 4192924k swap on /dev/sda8. Priority:-1 extents:1 across:4192924k [ 10.681004] microcode: CPU0 updated to revision 0xa3, date = 2007-08-13 [ 10.681950] microcode: CPU1 updated to revision 0xa3, date = 2007-08-13 [ 11.332034] r8169: eth0: link up [ 11.332040] r8169: eth0: link up [ 19.002581] usb usb2: uevent [ 19.002654] usb 2-0:1.0: uevent [ 19.002782] usb usb3: uevent [ 19.002854] usb 3-0:1.0: uevent [ 19.002897] usb 3-1: uevent [ 19.002967] usb 3-1:1.0: uevent [ 19.003468] usb usb4: uevent [ 19.003539] usb 4-0:1.0: uevent [ 19.003652] usb usb5: uevent [ 19.003722] usb 5-0:1.0: uevent [ 19.003848] usb usb1: uevent [ 19.003921] usb 1-0:1.0: uevent [ 23.528034] uhci_hcd 0000:00:1d.1: reserve dev 2 ep81-INT, period 8, phase 4, 99 us [ 23.905746] usb usb1: uevent [ 23.905831] usb 1-0:1.0: uevent [ 23.905881] usb usb2: uevent [ 23.905957] usb 2-0:1.0: uevent [ 23.906014] usb usb3: uevent [ 23.906090] usb 3-0:1.0: uevent [ 23.906140] usb usb4: uevent [ 23.906215] usb 4-0:1.0: uevent [ 23.906265] usb usb5: uevent [ 23.906339] usb 5-0:1.0: uevent [ 23.906389] usb 3-1: uevent [ 23.906466] usb 3-1:1.0: uevent [ 24.523419] usb usb4: usb auto-resume [ 24.523423] usb usb4: wakeup_rh [ 24.555015] hub 4-0:1.0: hub_resume [ 24.555042] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 24.555113] usb usb1: usb auto-resume [ 24.555119] ehci_hcd 0000:00:1d.7: resume root hub [ 24.596020] hub 1-0:1.0: hub_resume [ 24.596052] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000 [ 24.596116] usb usb5: usb auto-resume [ 24.596120] usb usb5: wakeup_rh [ 24.628013] hub 5-0:1.0: hub_resume [ 24.628035] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 24.628180] usb usb2: usb auto-resume [ 24.628182] usb usb2: wakeup_rh [ 24.660013] hub 2-0:1.0: hub_resume [ 24.660036] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 24.660113] usb usb2: uevent [ 24.660400] usb 2-0:1.0: uevent [ 24.660596] usb usb3: uevent [ 24.660813] usb 3-0:1.0: uevent [ 24.661011] usb 3-1: uevent [ 24.661231] usb 3-1:1.0: uevent [ 24.661423] usb usb4: uevent [ 24.661641] usb 4-0:1.0: uevent [ 24.661831] usb usb5: uevent [ 24.662057] usb 5-0:1.0: uevent [ 24.662250] usb usb1: uevent [ 24.662465] usb 1-0:1.0: uevent [ 25.704028] usb usb4: suspend_rh (auto-stop) [ 25.704052] usb usb5: suspend_rh (auto-stop) [ 25.704073] usb usb2: suspend_rh (auto-stop) [ 26.704026] hub 4-0:1.0: hub_suspend [ 26.704036] usb usb4: bus auto-suspend [ 26.704040] usb usb4: suspend_rh [ 26.704057] hub 1-0:1.0: hub_suspend [ 26.704062] usb usb1: bus auto-suspend [ 26.704066] ehci_hcd 0000:00:1d.7: suspend root hub [ 26.704089] hub 5-0:1.0: hub_suspend [ 26.704094] usb usb5: bus auto-suspend [ 26.704097] usb usb5: suspend_rh [ 26.704113] hub 2-0:1.0: hub_suspend [ 26.704118] usb usb2: bus auto-suspend [ 26.704121] usb usb2: suspend_rh [ 31.257143] type=1305 audit(1259926601.660:9694): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=0 [ 31.257148] type=1305 audit(1259926601.660:9695): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1 [ 31.574691] readahead-colle used greatest stack depth: 5808 bytes left [ 33.224445] usb usb1: uevent [ 33.224529] usb 1-0:1.0: uevent [ 33.224579] usb usb2: uevent [ 33.224653] usb 2-0:1.0: uevent [ 33.224701] usb usb3: uevent [ 33.224774] usb 3-0:1.0: uevent [ 33.224822] usb usb4: uevent [ 33.224894] usb 4-0:1.0: uevent [ 33.224942] usb usb5: uevent [ 33.225015] usb 5-0:1.0: uevent [ 33.225063] usb 3-1: uevent [ 33.225143] usb 3-1:1.0: uevent [ 40.350740] usb usb2: uevent [ 40.350816] usb 2-0:1.0: uevent [ 40.350851] usb usb3: uevent [ 40.350907] usb 3-0:1.0: uevent [ 40.350939] usb 3-1: uevent [ 40.350997] usb 3-1:1.0: uevent [ 40.351188] usb usb4: uevent [ 40.351246] usb 4-0:1.0: uevent [ 40.351278] usb usb5: uevent [ 40.351335] usb 5-0:1.0: uevent [ 40.351367] usb usb1: uevent [ 40.351422] usb 1-0:1.0: uevent [ 83.664035] usb usb1: usb resume [ 83.664041] ehci_hcd 0000:00:1d.7: resume root hub [ 83.705022] hub 1-0:1.0: hub_resume [ 83.705046] ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT [ 83.705052] hub 1-0:1.0: port 5: status 0501 change 0001 [ 83.806039] hub 1-0:1.0: state 7 ports 8 chg 0020 evt 0000 [ 83.806050] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s [ 83.857289] ehci_hcd 0000:00:1d.7: port 5 high speed [ 83.857293] ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT [ 83.908035] usb 1-5: new high speed USB device using ehci_hcd and address 3 [ 83.959272] ehci_hcd 0000:00:1d.7: port 5 high speed [ 83.959276] ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT [ 84.022773] usb 1-5: default language 0x0409 [ 84.023274] usb 1-5: udev 3, busnum 1, minor = 2 [ 84.023279] usb 1-5: New USB device found, idVendor=0cf3, idProduct=0002 [ 84.023283] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 84.023287] usb 1-5: Product: AR5523 [ 84.023290] usb 1-5: Manufacturer: Atheros Communications Inc [ 84.023294] usb 1-5: SerialNumber: 1.0 [ 84.023392] usb 1-5: uevent [ 84.023417] usb 1-5: usb_probe_device [ 84.023426] usb 1-5: configuration #1 chosen from 1 choice [ 84.023647] usb 1-5: adding 1-5:1.0 (config #1, interface 0) [ 84.023662] usb 1-5:1.0: uevent [ 84.023709] drivers/usb/core/inode.c: creating file '003' [ 84.024351] usb 1-5: uevent [ 84.026455] usb usb4: usb auto-resume [ 84.026458] usb usb4: wakeup_rh [ 84.058029] hub 4-0:1.0: hub_resume [ 84.058210] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 84.058218] usb usb5: usb auto-resume [ 84.058220] usb usb5: wakeup_rh [ 84.090031] hub 5-0:1.0: hub_resume [ 84.090057] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 84.090203] usb usb2: usb auto-resume [ 84.090206] usb usb2: wakeup_rh [ 84.122137] hub 2-0:1.0: hub_resume [ 84.122239] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 85.204040] usb usb4: suspend_rh (auto-stop) [ 85.204063] usb usb5: suspend_rh (auto-stop) [ 85.204083] usb usb2: suspend_rh (auto-stop) [ 86.701027] hub 5-0:1.0: hub_suspend [ 86.701038] usb usb5: bus auto-suspend [ 86.701042] usb usb5: suspend_rh [ 86.704037] hub 4-0:1.0: hub_suspend [ 86.704044] usb usb4: bus auto-suspend [ 86.704048] usb usb4: suspend_rh [ 86.704065] hub 2-0:1.0: hub_suspend [ 86.704069] usb usb2: bus auto-suspend [ 86.704073] usb usb2: suspend_rh [ 278.594111] usb usb4: usb auto-resume [ 278.594116] usb usb4: wakeup_rh [ 278.626025] hub 4-0:1.0: hub_resume [ 278.626055] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 278.626212] usb usb5: usb auto-resume [ 278.626215] usb usb5: wakeup_rh [ 278.658048] hub 5-0:1.0: hub_resume [ 278.658079] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 278.658230] usb usb2: usb auto-resume [ 278.658233] usb usb2: wakeup_rh [ 278.690032] hub 2-0:1.0: hub_resume [ 278.690057] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 279.705025] usb usb4: suspend_rh (auto-stop) [ 279.705049] usb usb5: suspend_rh (auto-stop) [ 279.705070] usb usb2: suspend_rh (auto-stop) [ 280.704030] hub 4-0:1.0: hub_suspend [ 280.704039] usb usb4: bus auto-suspend [ 280.704043] usb usb4: suspend_rh [ 280.704060] hub 5-0:1.0: hub_suspend [ 280.704066] usb usb5: bus auto-suspend [ 280.704069] usb usb5: suspend_rh [ 280.704085] hub 2-0:1.0: hub_suspend [ 280.704090] usb usb2: bus auto-suspend [ 280.704093] usb usb2: suspend_rh lsusb: [root@fedora ~]# lsusb Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0cf3:0002 Atheros Communications, Inc. AR5523 (no firmware) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
