hi greg, > 2.6.31-15 is a vendor-specific kernel, we have no idea what is in it. > > And it's 3 months old, can you try 2.6.32 instead? i released the same question few days back when i was trying to connect AR5523 on 2.6.32-rc8. i am splitting the output into mutiple mails as the moderator is not allowing me to send. now as per your notion i am running 2.6.32 and here is the dmesg and lsusb output: dmesg: [root@fedora ~]# dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32 (root@fedora) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #8 SMP Fri Dec 4 17:03:52 IST 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6a0000 (usable) [ 0.000000] BIOS-e820: 000000007f6a0000 - 000000007f6ae000 (ACPI data) [ 0.000000] BIOS-e820: 000000007f6ae000 - 000000007f6f0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f6f0000 - 000000007f6fe000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7f6a0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable [ 0.000000] 2 base 07F800000 mask FFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007f6a0000 (usable) [ 0.000000] modified: 000000007f6a0000 - 000000007f6ae000 (ACPI data) [ 0.000000] modified: 000000007f6ae000 - 000000007f6f0000 (ACPI NVS) [ 0.000000] modified: 000000007f6f0000 - 000000007f6fe000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 37cdb000 - 37fefb03 [ 0.000000] Allocated new RAMDISK: 00100000 - 00414b03 [ 0.000000] Move RAMDISK from 0000000037cdb000 - 0000000037fefb02 to 00100000 - 00414b02 [ 0.000000] ACPI: RSDP 000f9540 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 7f6a0000 0003C (v01 7529Z3 A7529200 20080616 MSFT 00000097) [ 0.000000] ACPI: FACP 7f6a0200 00084 (v01 7529Z3 A7529200 20080616 MSFT 00000097) [ 0.000000] ACPI: DSDT 7f6a05c0 059EF (v01 A7529 A7529200 00000200 INTL 20051117) [ 0.000000] ACPI: FACS 7f6ae000 00040 [ 0.000000] ACPI: APIC 7f6a0390 0006C (v01 7529Z3 A7529200 20080616 MSFT 00000097) [ 0.000000] ACPI: MCFG 7f6a0400 0003C (v01 7529Z3 OEMMCFG 20080616 MSFT 00000097) [ 0.000000] ACPI: SLIC 7f6a0440 00176 (v01 7529Z3 A7529200 20080616 MSFT 00000097) [ 0.000000] ACPI: OEMB 7f6ae040 00071 (v01 7529Z3 A7529200 20080616 MSFT 00000097) [ 0.000000] ACPI: GSCI 7f6ae0c0 02024 (v01 7529Z3 GMCHSCI 20080616 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 0001802f58] TEXT DATA BSS ==> [0001000000 - 0001802f58] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0001803000 - 000180a189] BRK ==> [0001803000 - 000180a189] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [0000100000 - 0000414b03] NEW RAMDISK ==> [0000100000 - 0000414b03] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007f6a0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007f6a0 [ 0.000000] On node 0 totalpages: 521775 [ 0.000000] free_area_init_node: node 0, pgdat c16e2c40, node_mem_map c180c200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2302 pages used for memmap [ 0.000000] HighMem zone: 292260 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 7f6fe000 (gap: 7f6fe000:7f702000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s33592 r0 d23752 u1048576 [ 0.000000] pcpu-alloc: s33592 r0 d23752 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517697 [ 0.000000] Kernel command line: ro root=UUID=613f3730-d052-491a-b5ce-558efac7d27b LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6a0) [ 0.000000] Memory: 2057200k/2087552k available (4425k kernel code, 28796k reserved, 2674k data, 396k init, 1178248k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1f000 - 0xfffff000 ( 896 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc16ef000 - 0xc1752000 ( 396 kB) [ 0.000000] .data : 0xc1452732 - 0xc16eef9c (2674 kB) [ 0.000000] .text : 0xc1000000 - 0xc1452732 (4425 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2420.241 MHz processor. [ 0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4840.48 BogoMIPS (lpj=2420241) [ 0.001018] Security Framework initialized [ 0.001023] SELinux: Initializing. [ 0.001030] SELinux: Starting in permissive mode [ 0.001036] Mount-cache hash table entries: 512 [ 0.001154] Initializing cgroup subsys ns [ 0.001158] Initializing cgroup subsys cpuacct [ 0.001162] Initializing cgroup subsys freezer [ 0.001177] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.001179] CPU: L2 cache: 2048K [ 0.001182] CPU: Physical Processor ID: 0 [ 0.001184] CPU: Processor Core ID: 0 [ 0.001187] mce: CPU supports 6 MCE banks [ 0.001194] CPU0: Thermal monitoring enabled (TM2) [ 0.001198] using mwait in idle threads. [ 0.001204] Performance Events: Core2 events, Intel PMU driver. [ 0.001209] ... version: 2 [ 0.001211] ... bit width: 40 [ 0.001212] ... generic registers: 2 [ 0.001213] ... value mask: 000000ffffffffff [ 0.001215] ... max period: 000000007fffffff [ 0.001216] ... fixed-purpose events: 3 [ 0.001218] ... event mask: 0000000700000003 [ 0.001221] Checking 'hlt' instruction... OK. [ 0.005545] ACPI: Core revision 20090903 [ 0.013264] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.023273] CPU0: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz stepping 0d [ 0.023996] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.001999] Initializing CPU#1 [ 0.001999] Calibrating delay using timer specific routine.. 4838.82 BogoMIPS (lpj=2419413) [ 0.001999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.001999] CPU: L2 cache: 2048K [ 0.001999] CPU: Physical Processor ID: 0 [ 0.001999] CPU: Processor Core ID: 1 [ 0.001999] CPU1: Thermal monitoring enabled (TM2) [ 0.094026] CPU1: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz stepping 0d [ 0.094036] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.095003] Brought up 2 CPUs [ 0.095005] Total of 2 processors activated (9679.30 BogoMIPS). [ 0.095380] khelper used greatest stack depth: 7260 bytes left [ 0.095380] Time: 17:06:10 Date: 12/04/09 [ 0.095380] NET: Registered protocol family 16 [ 0.096011] ACPI: bus type pci registered [ 0.096024] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.096024] PCI: Not using MMCONFIG. [ 0.096168] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 [ 0.096170] PCI: Using configuration type 1 for base access [ 0.096205] khelper used greatest stack depth: 7212 bytes left [ 0.101024] bio: create slab <bio-0> at 0 [ 0.102455] ACPI: EC: Look up EC in DSDT [ 0.105058] ACPI: Executed 1 blocks of module-level executable AML code [ 0.108771] ACPI: Interpreter enabled [ 0.108786] ACPI: (supports S0 S3 S4 S5) [ 0.108802] ACPI: Using IOAPIC for interrupt routing [ 0.108846] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.112213] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.112215] PCI: Using MMCONFIG for extended config space [ 0.120085] ACPI Warning: Incorrect checksum in table [OEMB] - 0A, should be FB (20090903/tbutils-314) [ 0.121138] ACPI: No dock devices found. [ 0.121401] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.121435] pci 0000:00:02.0: reg 10 32bit mmio: [0xfea80000-0xfeafffff] [ 0.121435] pci 0000:00:02.0: reg 14 io port: [0xdc00-0xdc07] [ 0.121435] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.121435] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfe900000-0xfe9fffff] [ 0.121435] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfea78000-0xfea7bfff] [ 0.121435] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.121435] pci 0000:00:1b.0: PME# disabled [ 0.121435] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.121435] pci 0000:00:1c.0: PME# disabled [ 0.121435] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.121435] pci 0000:00:1c.1: PME# disabled [ 0.121435] pci 0000:00:1d.0: reg 20 io port: [0xd880-0xd89f] [ 0.121435] pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f] [ 0.121435] pci 0000:00:1d.2: reg 20 io port: [0xd480-0xd49f] [ 0.121465] pci 0000:00:1d.3: reg 20 io port: [0xd400-0xd41f] [ 0.121514] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfea77c00-0xfea77fff] [ 0.122022] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.122026] pci 0000:00:1d.7: PME# disabled [ 0.122142] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.122147] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.122151] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.122154] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) [ 0.122158] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0a00 (mask 0017) [ 0.122161] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 00ff) [ 0.122198] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.122204] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.122210] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7] [ 0.122216] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb] [ 0.122222] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.122258] pci 0000:00:1f.2: reg 10 io port: [0xd080-0xd087] [ 0.122264] pci 0000:00:1f.2: reg 14 io port: [0xd000-0xd003] [ 0.122269] pci 0000:00:1f.2: reg 18 io port: [0xcc00-0xcc07] [ 0.122274] pci 0000:00:1f.2: reg 1c io port: [0xc880-0xc883] [ 0.122280] pci 0000:00:1f.2: reg 20 io port: [0xc800-0xc80f] [ 0.122301] pci 0000:00:1f.2: PME# supported from D3hot [ 0.122304] pci 0000:00:1f.2: PME# disabled [ 0.122346] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.122450] pci 0000:02:00.0: reg 10 io port: [0xe800-0xe8ff] [ 0.122469] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xfdfff000-0xfdffffff] [ 0.122482] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xfdfe0000-0xfdfeffff] [ 0.122490] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfebf0000-0xfebfffff] [ 0.122527] pci 0000:02:00.0: supports D1 D2 [ 0.122529] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.122534] pci 0000:02:00.0: PME# disabled [ 0.122583] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff] [ 0.122587] pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.122592] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff] [ 0.122636] pci 0000:00:1e.0: transparent bridge [ 0.122657] pci_bus 0000:00: on NUMA node 0 [ 0.122660] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.122793] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.122892] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.122944] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.130464] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.130464] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.130464] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.130464] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.131066] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.131155] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.131244] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.131333] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.131384] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.131384] vgaarb: loaded [ 0.131384] SCSI subsystem initialized [ 0.131384] libata version 3.00 loaded. [ 0.131384] usbcore: registered new interface driver usbfs [ 0.131384] usbcore: registered new interface driver hub [ 0.131384] usbcore: registered new device driver usb [ 0.132004] PCI: Using ACPI for IRQ routing [ 0.132062] cfg80211: Using static regulatory domain info [ 0.132062] cfg80211: Regulatory domain: US [ 0.132062] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 0.132062] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 0.132062] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.132062] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.132062] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.132062] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.132062] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 0.132062] cfg80211: Calling CRDA for country: US [ 0.132062] NetLabel: Initializing [ 0.132062] NetLabel: domain hash size = 128 [ 0.132062] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.132062] NetLabel: unlabeled traffic allowed by default [ 0.132083] hpet clockevent registered [ 0.132085] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.132090] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.132094] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.134990] Switching to clocksource tsc [ 0.136469] pnp: PnP ACPI init [ 0.136476] ACPI: bus type pnp registered [ 0.140901] pnp: PnP ACPI: found 18 devices [ 0.140905] ACPI: ACPI bus type pnp unregistered [ 0.140914] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.140922] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.140925] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.140927] system 00:08: ioport range 0x480-0x4bf has been reserved [ 0.140930] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.140934] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.140937] system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved [ 0.140942] system 00:0a: iomem range 0xffc00000-0xfff7ffff has been reserved [ 0.140947] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.140950] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.140955] system 00:0d: ioport range 0xa00-0xadf has been reserved [ 0.140958] system 00:0d: ioport range 0xae0-0xaef has been reserved [ 0.140963] system 00:10: iomem range 0xe0000000-0xefffffff has been reserved [ 0.140968] system 00:11: iomem range 0x0-0x9ffff could not be reserved [ 0.140971] system 00:11: iomem range 0xc0000-0xcffff could not be reserved [ 0.140974] system 00:11: iomem range 0xe0000-0xfffff could not be reserved [ 0.140977] system 00:11: iomem range 0x100000-0x7f6fffff could not be reserved [ 0.175927] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 0.175931] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 0.175935] pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff [ 0.175939] pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff [ 0.175945] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 0.175948] pci 0000:00:1c.1: IO window: 0xe000-0xefff [ 0.175952] pci 0000:00:1c.1: MEM window: 0xfeb00000-0xfebfffff [ 0.175956] pci 0000:00:1c.1: PREFETCH window: 0x000000fdf00000-0x000000fdffffff [ 0.175961] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.175963] pci 0000:00:1e.0: IO window: disabled [ 0.175967] pci 0000:00:1e.0: MEM window: disabled [ 0.175970] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.175979] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.175983] alloc irq_desc for 16 on node -1 [ 0.175985] alloc kstat_irqs on node -1 [ 0.175990] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.175995] pci 0000:00:1c.0: setting latency timer to 64 [ 0.176001] alloc irq_desc for 17 on node -1 [ 0.176003] alloc kstat_irqs on node -1 [ 0.176005] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.176009] pci 0000:00:1c.1: setting latency timer to 64 [ 0.176014] pci 0000:00:1e.0: setting latency timer to 64 [ 0.176018] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.176020] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.176022] pci_bus 0000:01: resource 0 io: [0x1000-0x1fff] [ 0.176024] pci_bus 0000:01: resource 1 mem: [0x80000000-0x801fffff] [ 0.176026] pci_bus 0000:01: resource 2 pref mem [0x80200000-0x803fffff] [ 0.176029] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.176031] pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff] [ 0.176033] pci_bus 0000:02: resource 2 pref mem [0xfdf00000-0xfdffffff] [ 0.176035] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.176037] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff] [ 0.176062] NET: Registered protocol family 2 [ 0.176129] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.176368] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.176782] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.176994] TCP: Hash tables configured (established 131072 bind 65536) [ 0.176996] TCP reno registered [ 0.177066] NET: Registered protocol family 1 [ 0.177180] RPC: Registered udp transport module. [ 0.177182] RPC: Registered tcp transport module. [ 0.177183] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.177193] pci 0000:00:02.0: Boot video device [ 0.177202] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30 [ 0.177203] pci 0000:00:1d.0: Performing full reset [ 0.177218] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.177219] pci 0000:00:1d.1: Performing full reset [ 0.177233] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.177235] pci 0000:00:1d.2: Performing full reset _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
