On Mon, May 17, 2021 at 8:01 PM David Gow <davidgow@xxxxxxxxxx> wrote:
>
> On Sat, May 15, 2021 at 3:59 PM David Gow <davidgow@xxxxxxxxxx> wrote:
> >
> > On Sat, May 8, 2021 at 5:31 AM Brendan Higgins
> > <brendanhiggins@xxxxxxxxxx> wrote:
> > >
> > > Add basic support to run QEMU via kunit_tool. Add support for i386,
> > > x86_64, arm, arm64, and a bunch more.
> > >
> > > Signed-off-by: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
> > > Tested-by: David Gow <davidgow@xxxxxxxxxx>
> > > ---
> > >
> > > Changes since last revision:
> > >
> > > - A number of minor obvious issues pointed out by David and Daniel.
> > > - Added facility for merging Kconfigs at Daniel's suggestion.
> > > - Broke out qemu_configs each into their own config file which is loaded
> > > dynamically - mostly at David's suggestion.
> > >
> > > ---
> >
> > This seems pretty good to me. I only have one real complaint --
> > qemu_configs needing to be in a subdirectory of ./tools/testing/kunit
> > -- but am able to tolerate that (even if I'd prefer not to have it) if
> > it's documented properly.
> >
> > Otherwise, save for a couple of minor nitpicks, this seems good to go.
> >
> > Reviewed-by: David Gow <davidgow@xxxxxxxxxx>
> >
> >
>
> One thing I forgot to mention is that I'm not 100% sure about the
> Kconfig fragments being embedded in the qemu_configs. I still kind-of
> prefer the idea of them being in separate config files. While I don't
I don't feel strongly either way, but I don't have a good idea on how
to implement your idea well. How about we leave it for now, and if you
decide you really want to do something about it, you can do it?
> think this is necessarily a blocker, I did just realise that, by
> default, kunit.py run --arch=<non-UM-arch> will pull its default
> .kunitconfig from arch/um/configs/kunit_defconfig, which definitely
> feels awkward when UML is not otherwise involved.
Hmmm...this file is identical to
tools/testing/kunit/configs/all_tests.config. Maybe we should just use
that instead?
> Some further thoughts below (which range a bit from "practical
> suggestion" to "overcomplicated ponderings", so don't feel the
> pressure to take all of them).
>
> (...snip...)
>
> > > diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py
> > > index e22ade9d91ad5..2bd196fd69e5c 100644
> > > --- a/tools/testing/kunit/kunit_kernel.py
> > > +++ b/tools/testing/kunit/kunit_kernel.py
> > > @@ -6,23 +6,31 @@
> > > # Author: Felix Guo <felixguoxiuping@xxxxxxxxx>
> > > # Author: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
> > >
> > > +from __future__ import annotations
> > > +import importlib.util
> > > import logging
> > > import subprocess
> > > import os
> > > import shutil
> > > import signal
> > > from typing import Iterator
> > > +from typing import Optional
> > >
> > > from contextlib import ExitStack
> > >
> > > +from collections import namedtuple
> > > +
> > > import kunit_config
> > > import kunit_parser
> > > +import qemu_config
> > >
> > > KCONFIG_PATH = '.config'
> > > KUNITCONFIG_PATH = '.kunitconfig'
> > > DEFAULT_KUNITCONFIG_PATH = 'arch/um/configs/kunit_defconfig'
>
> This being in arch/um doesn't seem great if its being used for non-UML
> builds. Is it worth either:
> (a) moving this somewhere else (e.g., tools/testing/kunit/configs as
> with the BROKEN_ALLCONFIG_PATH beflow), or
How about we use: tools/testing/kunit/configs/all_tests.config ? The
file is identical.
> (b) giving each architecture its own kunit_defconfig, possibly in
> place of the qemuconfig member of QemuArchParams
>
> I'm leaning towards (b), which solves two different sources of
> ugliness in one go, though it would appear to have the downside that
> the default .kunitconfig could end up being architecture specific,
> which isn't great.
Yeah, I am not a fan of trying to solve that problem in this patchset.
This is sounding more and more like what should be follow-on work to
me.
> > > BROKEN_ALLCONFIG_PATH = 'tools/testing/kunit/configs/broken_on_uml.config'
> > > OUTFILE_PATH = 'test.log'
> > > +ABS_TOOL_PATH = os.path.abspath(os.path.dirname(__file__))
> > > +QEMU_CONFIGS_DIR = os.path.join(ABS_TOOL_PATH, 'qemu_configs')
> > >
>
> (...snip...)
>
> > > diff --git a/tools/testing/kunit/qemu_config.py b/tools/testing/kunit/qemu_config.py
> > > new file mode 100644
> > > index 0000000000000..aff1fe0442dbc
> > > --- /dev/null
> > > +++ b/tools/testing/kunit/qemu_config.py
> > > @@ -0,0 +1,17 @@
> > > +# SPDX-License-Identifier: GPL-2.0
> > > +#
> > > +# Collection of configs for building non-UML kernels and running them on QEMU.
> > > +#
> > > +# Copyright (C) 2021, Google LLC.
> > > +# Author: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
> > > +
> > > +from collections import namedtuple
> > > +
> > > +
> > > +QemuArchParams = namedtuple('QemuArchParams', ['linux_arch',
> > > + 'qemuconfig',
>
> As mentioned, I'm not thrilled about keeping the Kconfig inline here,
> and would kind-of prefer it to be in another file. I could live with
> it if I have to, though. Regardless, 'qemuconfig' is not a
It will be fixed in the next revision.
> super-descriptive name, particularly as it's not clear if this is
> configuring QEMU (no, that's extra_qemu_params'), or configuring the
> kernel for QEMU compatibility.
Any suggestions on a better name? qemu_build_config_path? These
configs contain configs for configuring, building, and running kernels
on QEMU.
> > > + 'qemu_arch',
> > > + 'kernel_path',
> > > + 'kernel_command_line',
> > > + 'extra_qemu_params'])
> > > +
> >
> > Nit: newline at end of file.
> >
> >
> >
> > > diff --git a/tools/testing/kunit/qemu_configs/alpha.py b/tools/testing/kunit/qemu_configs/alpha.py
> > > new file mode 100644
> > > index 0000000000000..2cc64f848ca2c
> > > --- /dev/null
> > > +++ b/tools/testing/kunit/qemu_configs/alpha.py
> > > @@ -0,0 +1,10 @@
> > > +from ..qemu_config import QemuArchParams
> > > +
> > > +QEMU_ARCH = QemuArchParams(linux_arch='alpha',
> > > + qemuconfig='''
> > > +CONFIG_SERIAL_8250=y
> > > +CONFIG_SERIAL_8250_CONSOLE=y''',
>
> If these were in a separate file, they could be shared across alpha,
> i386, x86_64, etc. Of course, that wouldn't gel well with putting them
> in arch/.../config. If there were some way of listing multiple files,
> it could form part of the config for several more architectures,
> though that's probably overcomplicating things.
Yeah, like I said, I have sympathy for what you are saying here, but
it really feels like something that can and should be addressed in
follow on patches. We could totally address this issue later by
expanding this field to take either a string containing a Kconfig, or
a path to an external Kconfig; if we do so, it won't cause any
migration issues in the future.
> > > + qemu_arch='alpha',
> > > + kernel_path='arch/alpha/boot/vmlinux',
> > > + kernel_command_line='console=ttyS0',
> > > + extra_qemu_params=[''])
> > > diff --git a/tools/testing/kunit/qemu_configs/arm.py b/tools/testing/kunit/qemu_configs/arm.py
> > > new file mode 100644
> > > index 0000000000000..29a043b0531a0
> > > --- /dev/null
> > > +++ b/tools/testing/kunit/qemu_configs/arm.py
> > > @@ -0,0 +1,13 @@
> > > +from ..qemu_config import QemuArchParams
> > > +
> > > +QEMU_ARCH = QemuArchParams(linux_arch='arm',
> > > + qemuconfig='''
> > > +CONFIG_ARCH_VIRT=y
> > > +CONFIG_SERIAL_AMBA_PL010=y
> > > +CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
> > > +CONFIG_SERIAL_AMBA_PL011=y
> > > +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y''',
>
> Similarly, if in a separate file and there were some multiple-file
> mechanism, these could mostly be shared between arm & arm64 (ARCH_VIRT
> being the only problem). Again, probably overcomplicating it at this
> point though.
Right.
> > > + qemu_arch='arm',
> > > + kernel_path='arch/arm/boot/zImage',
> > > + kernel_command_line='console=ttyAMA0',
> > > + extra_qemu_params=['-machine virt'])
> > > diff --git a/tools/testing/kunit/qemu_configs/arm64.py b/tools/testing/kunit/qemu_configs/arm64.py
> > > new file mode 100644
> > > index 0000000000000..1ba200bc99f0f
> > > --- /dev/null
> > > +++ b/tools/testing/kunit/qemu_configs/arm64.py
> > > @@ -0,0 +1,12 @@
> > > +from ..qemu_config import QemuArchParams
> > > +
> > > +QEMU_ARCH = QemuArchParams(linux_arch='arm64',
> > > + qemuconfig='''
> > > +CONFIG_SERIAL_AMBA_PL010=y
> > > +CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
> > > +CONFIG_SERIAL_AMBA_PL011=y
> > > +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y''',
> > > + qemu_arch='aarch64',
> > > + kernel_path='arch/arm64/boot/Image.gz',
> > > + kernel_command_line='console=ttyAMA0',
> > > + extra_qemu_params=['-machine virt', '-cpu cortex-a57'])
> > > diff --git a/tools/testing/kunit/qemu_configs/i386.py b/tools/testing/kunit/qemu_configs/i386.py
> > > new file mode 100644
> > > index 0000000000000..3998af306468e
> > > --- /dev/null
> > > +++ b/tools/testing/kunit/qemu_configs/i386.py
> > > @@ -0,0 +1,10 @@
> > > +from ..qemu_config import QemuArchParams
> > > +
> > > +QEMU_ARCH = QemuArchParams(linux_arch='i386',
> > > + qemuconfig='''
> > > +CONFIG_SERIAL_8250=y
> > > +CONFIG_SERIAL_8250_CONSOLE=y''',
> > > + qemu_arch='x86_64',
> > > + kernel_path='arch/x86/boot/bzImage',
> > > + kernel_command_line='console=ttyS0',
> > > + extra_qemu_params=[''])
> > > diff --git a/tools/testing/kunit/qemu_configs/powerpc.py b/tools/testing/kunit/qemu_configs/powerpc.py
> > > new file mode 100644
> > > index 0000000000000..46292ce9e368e
> > > --- /dev/null
> > > +++ b/tools/testing/kunit/qemu_configs/powerpc.py
> > > @@ -0,0 +1,12 @@
> > > +from ..qemu_config import QemuArchParams
> > > +
> > > +QEMU_ARCH = QemuArchParams(linux_arch='powerpc',
> > > + qemuconfig='''
> > > +CONFIG_PPC64=y
> > > +CONFIG_SERIAL_8250=y
> > > +CONFIG_SERIAL_8250_CONSOLE=y
> > > +CONFIG_HVC_CONSOLE=y''',
> > > + qemu_arch='ppc64',
> > > + kernel_path='vmlinux',
> > > + kernel_command_line='console=ttyS0',
> > > + extra_qemu_params=['-M pseries', '-cpu power8'])
> > > diff --git a/tools/testing/kunit/qemu_configs/riscv.py b/tools/testing/kunit/qemu_configs/riscv.py
> > > new file mode 100644
> > > index 0000000000000..de8c62d465723
> > > --- /dev/null
> > > +++ b/tools/testing/kunit/qemu_configs/riscv.py
> > > @@ -0,0 +1,31 @@
> > > +from ..qemu_config import QemuArchParams
> > > +import os
> > > +import os.path
> > > +import sys
> > > +
> > > +GITHUB_OPENSBI_URL = 'https://github.com/qemu/qemu/raw/master/pc-bios/opensbi-riscv64-generic-fw_dynamic.bin'
> > > +OPENSBI_FILE = os.path.basename(GITHUB_OPENSBI_URL)
> > > +
> > > +if not os.path.isfile(OPENSBI_FILE):
> > > + print('\n\nOpenSBI file is not in the current working directory.\n'
> > > + 'Would you like me to download it for you from:\n' + GITHUB_OPENSBI_URL + ' ?\n')
> > > + response = input('yes/[no]: ')
> > > + if response.strip() == 'yes':
> > > + os.system('wget ' + GITHUB_OPENSBI_URL)
> > > + else:
> > > + sys.exit()
> > > +
> > > +QEMU_ARCH = QemuArchParams(linux_arch='riscv',
> > > + qemuconfig='''
> > > +CONFIG_SOC_VIRT=y
> > > +CONFIG_SERIAL_8250=y
> > > +CONFIG_SERIAL_8250_CONSOLE=y
> > > +CONFIG_SERIAL_OF_PLATFORM=y
> > > +CONFIG_SERIAL_EARLYCON_RISCV_SBI=y''',
> > > + qemu_arch='riscv64',
> > > + kernel_path='arch/riscv/boot/Image',
> > > + kernel_command_line='console=ttyS0',
> > > + extra_qemu_params=[
> > > + '-machine virt',
> > > + '-cpu rv64',
> > > + '-bios opensbi-riscv64-generic-fw_dynamic.bin'])
> > > diff --git a/tools/testing/kunit/qemu_configs/s390.py b/tools/testing/kunit/qemu_configs/s390.py
> > > new file mode 100644
> > > index 0000000000000..04c90332f1098
> > > --- /dev/null
> > > +++ b/tools/testing/kunit/qemu_configs/s390.py
> > > @@ -0,0 +1,14 @@
> > > +from ..qemu_config import QemuArchParams
> > > +
> > > +QEMU_ARCH = QemuArchParams(linux_arch='s390',
> > > + qemuconfig='''
> > > +CONFIG_EXPERT=y
> > > +CONFIG_TUNE_ZEC12=y
> > > +CONFIG_NUMA=y
> > > +CONFIG_MODULES=y''',
> > > + qemu_arch='s390x',
> > > + kernel_path='arch/s390/boot/bzImage',
> > > + kernel_command_line='console=ttyS0',
> > > + extra_qemu_params=[
> > > + '-machine s390-ccw-virtio',
> > > + '-cpu qemu',])
> > > diff --git a/tools/testing/kunit/qemu_configs/sparc.py b/tools/testing/kunit/qemu_configs/sparc.py
> > > new file mode 100644
> > > index 0000000000000..f26b5f27cc5a1
> > > --- /dev/null
> > > +++ b/tools/testing/kunit/qemu_configs/sparc.py
> > > @@ -0,0 +1,10 @@
> > > +from ..qemu_config import QemuArchParams
> > > +
> > > +QEMU_ARCH = QemuArchParams(linux_arch='sparc',
> > > + qemuconfig='''
> > > +CONFIG_SERIAL_8250=y
> > > +CONFIG_SERIAL_8250_CONSOLE=y''',
> > > + qemu_arch='sparc',
> > > + kernel_path='arch/sparc/boot/zImage',
> > > + kernel_command_line='console=ttyS0 mem=256M',
> > > + extra_qemu_params=['-m 256'])
> > > diff --git a/tools/testing/kunit/qemu_configs/x86_64.py b/tools/testing/kunit/qemu_configs/x86_64.py
> > > new file mode 100644
> > > index 0000000000000..bd5ab733b92ac
> > > --- /dev/null
> > > +++ b/tools/testing/kunit/qemu_configs/x86_64.py
> > > @@ -0,0 +1,10 @@
> > > +from ..qemu_config import QemuArchParams
> > > +
> > > +QEMU_ARCH = QemuArchParams(linux_arch='x86_64',
> > > + qemuconfig='''
> > > +CONFIG_SERIAL_8250=y
> > > +CONFIG_SERIAL_8250_CONSOLE=y''',
> > > + qemu_arch='x86_64',
> > > + kernel_path='arch/x86/boot/bzImage',
> > > + kernel_command_line='console=ttyS0',
> > > + extra_qemu_params=[''])
> > > --
> > > 2.31.1.607.g51e8a6a459-goog
> > >
