This series brings up initial support for the Apple M1 SoC, used in the 2020 Mac Mini, MacBook Pro, and MacBook Air models. The following features are supported in this initial port: - UART (samsung-style) with earlycon support - Interrupts, including affinity and IPIs (Apple Interrupt Controller) - SMP (through standard spin-table support) - simplefb-based framebuffer - Devicetree for the Mac Mini (should work for the others too at this stage) See below for an overview of changes since v3. == Merge notes == This patchset has several dependencies: * Build dep on the FIQ support series in [1]. * Runtime dep on the Samsung TTY changes in tty-next (modulo DT validation). * Runtime dep on the nVHE changes being reviewed in [2]. A tree containing this patchset on top of the required dependencies is available at [3][4], for those who want to test it. This series is expected to be merged by Arnd via the SoC tree. Maintainers, please ack if you are happy with the patches. We will coordinate with Arnd and Mark on the FIQ series to make sure all that goes smoothly. [1] https://lore.kernel.org/linux-arm-kernel/20210315115629.57191-1-mark.rutland@xxxxxxx/T/ [2] https://lore.kernel.org/linux-arm-kernel/20210330173947.999859-1-maz@xxxxxxxxxx/T/ [3] git://github.com/AsahiLinux/linux.git upstream-bringup-v4 [4] https://github.com/AsahiLinux/linux/tree/upstream-bringup-v4 == Testing notes == This has been tested on an Apple M1 Mac Mini booting to a framebuffer and serial console, with SMP and KASLR, with an arm64 defconfig (+ CONFIG_FB_SIMPLE for the fb). In addition, the AIC driver now supports running in EL1, tested in UP mode only. == Patch overview == - 01-02 Core platform DT bindings - 03-04 CPU DT bindings and MIDR defines - 05-06 Add interrupt-names support to the ARM timer driver This is used to cleanly express the lack of a secure timer; platforms in the past have used various hacks like dummy IRQs here. - 07-12 ioremap_np() (nGnRnE) support The fabric in these SoCs only supports nGnRnE accesses for standard MMIO, except for PCI ranges which use nGnRE. Linux currently defaults to the latter on ARM64, so this adds a new ioremap type and DT properties to automatically select it for drivers using OF and devm abstractions, under buses specified in DT. - 13-15 AIC (Apple Interrupt Controller) driver and support defines This also embeds FIQ handling for this platform. - 16 Introduce CONFIG_ARCH_APPLE & add it to defconfig - 17 simple-framebuffer bindings for Apple (trivial) - 18 Add the initial M1 Mac Mini (j274) devicetree == About the hardware == These machines officially support booting unsigned/user-provided XNU-like kernels, with a very different boot protocol and devicetree format. We are developing an initial bootloader, m1n1 [1], to take care of as many hardware peculiarities as possible and present a standard Linux arm64 boot protocol and device tree. In the future, I expect that production setups will add U-Boot and perhaps GRUB into the boot chain, to make the boot process similar to other ARM64 platforms. The machines expose their debug UART over USB Type C, triggered with vendor-specific USB-PD commands. Currently, the easiest way to get a serial console on these machines is to use a second M1 box and a simple USB C cable [2]. You can also build a DIY interface using an Arduino, a FUSB302 chip or board, and a 1.2V UART-TTL adapter [3]. In the coming weeks we will be designing an open hardware project to provide serial/debug connectivity to these machines (and, hopefully, also support other UART-over-Type C setups from other vendors). Please contact me privately if you are interested in getting an early prototype version of one of these devices. We also have WIP/not merged yet support for loading kernels and interacting via dwc3 usb-gadget, which works with a standard C-C or C-A cable and any Linux host. A quickstart guide to booting Linux kernels on these machines is available at [4], and we are documenting the hardware at [5]. [1] https://github.com/AsahiLinux/m1n1/ [2] https://github.com/AsahiLinux/macvdmtool/ [3] https://github.com/AsahiLinux/vdmtool/ [4] https://github.com/AsahiLinux/docs/wiki/Developer-Quickstart [5] https://github.com/AsahiLinux/docs/wiki == Project Blurb == Asahi Linux is an open community project dedicated to developing and maintaining mainline support for Apple Silicon on Linux. Feel free to drop by #asahi and #asahi-dev on freenode to chat with us, or check our website for more information on the project: https://asahilinux.org/ == Changes since v3 == * Serial patches have already been merged into tty-next and are no longer included * nVHE fixup patches are being reviewed separately and no longer part of this series * Updated arm,arch-timer bindings to be more restrictive, renamed phys-secure to sec-phys * Reordered ioremap() variants list in device-io.rst * Removed sysreg_apple.h (defines are in drivers now) * Many cleanups, bug fixes, and reworks to AIC, including some bug fixes from Marc's KVM series, kernel as EL1 support, and more. * Simplified non-posted MMIO DT handling to only apply to direct children of a bus, and only use "nonposted-mmio". Removed quirk optimization. * Implemented default pci_remap_cfgspace() in terms of ioremap_np() and removed arch-specific pci_remap_cfgspace override for arm64 (arm32 can come later) * Replaced license in AIC bindings header with GPL-2.0+ OR MIT * Other minor typo/style fixes Arnd Bergmann (1): docs: driver-api: device-io: Document I/O access functions Hector Martin (17): dt-bindings: vendor-prefixes: Add apple prefix dt-bindings: arm: apple: Add bindings for Apple ARM platforms dt-bindings: arm: cpus: Add apple,firestorm & icestorm compatibles arm64: cputype: Add CPU implementor & types for the Apple M1 cores dt-bindings: timer: arm,arch_timer: Add interrupt-names support arm64: arch_timer: Implement support for interrupt-names asm-generic/io.h: Add a non-posted variant of ioremap() docs: driver-api: device-io: Document ioremap() variants & access funcs arm64: Implement ioremap_np() to map MMIO as nGnRnE asm-generic/io.h: implement pci_remap_cfgspace using ioremap_np of/address: Add infrastructure to declare MMIO as non-posted arm64: Move ICH_ sysreg bits from arm-gic-v3.h to sysreg.h dt-bindings: interrupt-controller: Add DT bindings for apple-aic irqchip/apple-aic: Add support for the Apple Interrupt Controller arm64: Kconfig: Introduce CONFIG_ARCH_APPLE dt-bindings: display: Add apple,simple-framebuffer arm64: apple: Add initial Apple Mac mini (M1, 2020) devicetree .../devicetree/bindings/arm/apple.yaml | 64 ++ .../devicetree/bindings/arm/cpus.yaml | 2 + .../bindings/display/simple-framebuffer.yaml | 5 + .../interrupt-controller/apple,aic.yaml | 88 ++ .../bindings/timer/arm,arch_timer.yaml | 19 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + Documentation/driver-api/device-io.rst | 356 ++++++++ .../driver-api/driver-model/devres.rst | 1 + MAINTAINERS | 14 + arch/arm64/Kconfig.platforms | 7 + arch/arm64/boot/dts/Makefile | 1 + arch/arm64/boot/dts/apple/Makefile | 2 + arch/arm64/boot/dts/apple/t8103-j274.dts | 45 + arch/arm64/boot/dts/apple/t8103.dtsi | 135 +++ arch/arm64/configs/defconfig | 1 + arch/arm64/include/asm/cputype.h | 6 + arch/arm64/include/asm/io.h | 11 +- arch/arm64/include/asm/sysreg.h | 60 ++ arch/sparc/include/asm/io_64.h | 4 + drivers/clocksource/arm_arch_timer.c | 24 +- drivers/irqchip/Kconfig | 8 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-apple-aic.c | 837 ++++++++++++++++++ drivers/of/address.c | 43 +- include/asm-generic/io.h | 22 +- include/asm-generic/iomap.h | 9 + include/clocksource/arm_arch_timer.h | 1 + .../interrupt-controller/apple-aic.h | 15 + include/linux/cpuhotplug.h | 1 + include/linux/io.h | 23 +- include/linux/ioport.h | 1 + include/linux/irqchip/arm-gic-v3.h | 56 -- include/linux/of_address.h | 1 + lib/devres.c | 22 + 34 files changed, 1807 insertions(+), 80 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/apple.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml create mode 100644 arch/arm64/boot/dts/apple/Makefile create mode 100644 arch/arm64/boot/dts/apple/t8103-j274.dts create mode 100644 arch/arm64/boot/dts/apple/t8103.dtsi create mode 100644 drivers/irqchip/irq-apple-aic.c create mode 100644 include/dt-bindings/interrupt-controller/apple-aic.h -- 2.30.0
