During the process of converting the documentation to reST, some links
were converted using the following wrong syntax (and sometimes using %20
instead of spaces):
`Display text <#section-name-in-html>`__
This syntax can work in html, but isn't the one described in docutils,
and it also doesn't work on pdf. The following syntax should be used
instead:
`Display text <Section Name_>`__
The usual toolchain doesn't mind this unusual syntax, but it causes
errors when trying to build using the not-yet-merged rst2pdf:
ValueError: format not resolved, probably missing URL scheme or undefined destination target for 'Forcing%20Quiescent%20States'
Fixes: ccc9971e2147 ("docs: rcu: convert some articles from html to ReST")
Fixes: c8cce10a62aa ("docs: Fix the reference labels in Locking.rst")
Fixes: e548cdeffcd8 ("docs-rst: convert kernel-locking to ReST")
Fixes: 7ddedebb03b7 ("ALSA: doc: ReSTize writing-an-alsa-driver document")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxxx>
---
.../Tree-RCU-Memory-Ordering.rst | 8 ++++----
.../RCU/Design/Requirements/Requirements.rst | 20 +++++++++----------
Documentation/kernel-hacking/locking.rst | 8 ++++----
.../kernel-api/writing-an-alsa-driver.rst | 16 +++++++--------
4 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst b/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst
index e44cfcb7adcc..d5e579dd7216 100644
--- a/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst
+++ b/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst
@@ -473,7 +473,7 @@ read-side critical sections that follow the idle period (the oval near
the bottom of the diagram above).
Plumbing this into the full grace-period execution is described
-`below <#Forcing%20Quiescent%20States>`__.
+`below <Forcing Quiescent States_>`__.
CPU-Hotplug Interface
^^^^^^^^^^^^^^^^^^^^^
@@ -494,7 +494,7 @@ mask to detect CPUs having gone offline since the beginning of this
grace period.
Plumbing this into the full grace-period execution is described
-`below <#Forcing%20Quiescent%20States>`__.
+`below <Forcing Quiescent States_>`__.
Forcing Quiescent States
^^^^^^^^^^^^^^^^^^^^^^^^
@@ -532,7 +532,7 @@ from other CPUs.
| RCU. But this diagram is complex enough as it is, so simplicity |
| overrode accuracy. You can think of it as poetic license, or you can |
| think of it as misdirection that is resolved in the |
-| `stitched-together diagram <#Putting%20It%20All%20Together>`__. |
+| `stitched-together diagram <Putting It All Together_>`__. |
+-----------------------------------------------------------------------+
Grace-Period Cleanup
@@ -596,7 +596,7 @@ maintain ordering. For example, if the callback function wakes up a task
that runs on some other CPU, proper ordering must in place in both the
callback function and the task being awakened. To see why this is
important, consider the top half of the `grace-period
-cleanup <#Grace-Period%20Cleanup>`__ diagram. The callback might be
+cleanup <Grace-Period Cleanup_>`__ diagram. The callback might be
running on a CPU corresponding to the leftmost leaf ``rcu_node``
structure, and awaken a task that is to run on a CPU corresponding to
the rightmost leaf ``rcu_node`` structure, and the grace-period kernel
diff --git a/Documentation/RCU/Design/Requirements/Requirements.rst b/Documentation/RCU/Design/Requirements/Requirements.rst
index 1ae79a10a8de..d4125caf394e 100644
--- a/Documentation/RCU/Design/Requirements/Requirements.rst
+++ b/Documentation/RCU/Design/Requirements/Requirements.rst
@@ -45,7 +45,7 @@ requirements:
#. `Other RCU Flavors`_
#. `Possible Future Changes`_
-This is followed by a `summary <#Summary>`__, however, the answers to
+This is followed by a `summary <Summary_>`__, however, the answers to
each quick quiz immediately follows the quiz. Select the big white space
with your mouse to see the answer.
@@ -1096,7 +1096,7 @@ memory barriers.
| case, voluntary context switch) within an RCU read-side critical |
| section. However, sleeping locks may be used within userspace RCU |
| read-side critical sections, and also within Linux-kernel sleepable |
-| RCU `(SRCU) <#Sleepable%20RCU>`__ read-side critical sections. In |
+| RCU `(SRCU) <Sleepable RCU_>`__ read-side critical sections. In |
| addition, the -rt patchset turns spinlocks into a sleeping locks so |
| that the corresponding critical sections can be preempted, which also |
| means that these sleeplockified spinlocks (but not other sleeping |
@@ -1186,7 +1186,7 @@ non-preemptible (``CONFIG_PREEMPT=n``) kernels, and thus `tiny
RCU <https://lkml.kernel.org/g/20090113221724.GA15307@xxxxxxxxxxxxxxxxxx>`__
was born. Josh Triplett has since taken over the small-memory banner
with his `Linux kernel tinification <https://tiny.wiki.kernel.org/>`__
-project, which resulted in `SRCU <#Sleepable%20RCU>`__ becoming optional
+project, which resulted in `SRCU <Sleepable RCU_>`__ becoming optional
for those kernels not needing it.
The remaining performance requirements are, for the most part,
@@ -1457,8 +1457,8 @@ will vary as the value of ``HZ`` varies, and can also be changed using
the relevant Kconfig options and kernel boot parameters. RCU currently
does not do much sanity checking of these parameters, so please use
caution when changing them. Note that these forward-progress measures
-are provided only for RCU, not for `SRCU <#Sleepable%20RCU>`__ or `Tasks
-RCU <#Tasks%20RCU>`__.
+are provided only for RCU, not for `SRCU <Sleepable RCU_>`__ or `Tasks
+RCU <Tasks RCU_>`__.
RCU takes the following steps in ``call_rcu()`` to encourage timely
invocation of callbacks when any given non-\ ``rcu_nocbs`` CPU has
@@ -1477,8 +1477,8 @@ encouragement was provided:
Again, these are default values when running at ``HZ=1000``, and can be
overridden. Again, these forward-progress measures are provided only for
-RCU, not for `SRCU <#Sleepable%20RCU>`__ or `Tasks
-RCU <#Tasks%20RCU>`__. Even for RCU, callback-invocation forward
+RCU, not for `SRCU <Sleepable RCU_>`__ or `Tasks
+RCU <Tasks RCU_>`__. Even for RCU, callback-invocation forward
progress for ``rcu_nocbs`` CPUs is much less well-developed, in part
because workloads benefiting from ``rcu_nocbs`` CPUs tend to invoke
``call_rcu()`` relatively infrequently. If workloads emerge that need
@@ -1920,7 +1920,7 @@ Hotplug CPU
The Linux kernel supports CPU hotplug, which means that CPUs can come
and go. It is of course illegal to use any RCU API member from an
-offline CPU, with the exception of `SRCU <#Sleepable%20RCU>`__ read-side
+offline CPU, with the exception of `SRCU <Sleepable RCU_>`__ read-side
critical sections. This requirement was present from day one in
DYNIX/ptx, but on the other hand, the Linux kernel's CPU-hotplug
implementation is “interesting.”
@@ -2147,7 +2147,7 @@ handles these states differently:
However, RCU must be reliably informed as to whether any given CPU is
currently in the idle loop, and, for ``NO_HZ_FULL``, also whether that
CPU is executing in usermode, as discussed
-`earlier <#Energy%20Efficiency>`__. It also requires that the
+`earlier <Energy Efficiency_>`__. It also requires that the
scheduling-clock interrupt be enabled when RCU needs it to be:
#. If a CPU is either idle or executing in usermode, and RCU believes it
@@ -2264,7 +2264,7 @@ Performance, Scalability, Response Time, and Reliability
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Expanding on the `earlier
-discussion <#Performance%20and%20Scalability>`__, RCU is used heavily by
+discussion <Performance and Scalability_>`__, RCU is used heavily by
hot code paths in performance-critical portions of the Linux kernel's
networking, security, virtualization, and scheduling code paths. RCU
must therefore use efficient implementations, especially in its
diff --git a/Documentation/kernel-hacking/locking.rst b/Documentation/kernel-hacking/locking.rst
index 6ed806e6061b..c3448929a824 100644
--- a/Documentation/kernel-hacking/locking.rst
+++ b/Documentation/kernel-hacking/locking.rst
@@ -118,11 +118,11 @@ spinlock, but you may block holding a mutex. If you can't lock a mutex,
your task will suspend itself, and be woken up when the mutex is
released. This means the CPU can do something else while you are
waiting. There are many cases when you simply can't sleep (see
-`What Functions Are Safe To Call From Interrupts? <#sleeping-things>`__),
+`What Functions Are Safe To Call From Interrupts?`_),
and so have to use a spinlock instead.
Neither type of lock is recursive: see
-`Deadlock: Simple and Advanced <#deadlock>`__.
+`Deadlock: Simple and Advanced`_.
Locks and Uniprocessor Kernels
------------------------------
@@ -179,7 +179,7 @@ perfect world).
Note that you can also use spin_lock_irq() or
spin_lock_irqsave() here, which stop hardware interrupts
-as well: see `Hard IRQ Context <#hard-irq-context>`__.
+as well: see `Hard IRQ Context`_.
This works perfectly for UP as well: the spin lock vanishes, and this
macro simply becomes local_bh_disable()
@@ -230,7 +230,7 @@ The Same Softirq
~~~~~~~~~~~~~~~~
The same softirq can run on the other CPUs: you can use a per-CPU array
-(see `Per-CPU Data <#per-cpu-data>`__) for better performance. If you're
+(see `Per-CPU Data`_) for better performance. If you're
going so far as to use a softirq, you probably care about scalable
performance enough to justify the extra complexity.
diff --git a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
index 73bbd59afc33..e6365836fa8b 100644
--- a/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
+++ b/Documentation/sound/kernel-api/writing-an-alsa-driver.rst
@@ -71,7 +71,7 @@ core/oss
The codes for PCM and mixer OSS emulation modules are stored in this
directory. The rawmidi OSS emulation is included in the ALSA rawmidi
code since it's quite small. The sequencer code is stored in
-``core/seq/oss`` directory (see `below <#core-seq-oss>`__).
+``core/seq/oss`` directory (see `below <core/seq/oss_>`__).
core/seq
~~~~~~~~
@@ -382,7 +382,7 @@ where ``enable[dev]`` is the module option.
Each time the ``probe`` callback is called, check the availability of
the device. If not available, simply increment the device index and
returns. dev will be incremented also later (`step 7
-<#set-the-pci-driver-data-and-return-zero>`__).
+<7) Set the PCI driver data and return zero._>`__).
2) Create a card instance
~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -450,10 +450,10 @@ field contains the information shown in ``/proc/asound/cards``.
5) Create other components, such as mixer, MIDI, etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Here you define the basic components such as `PCM <#PCM-Interface>`__,
-mixer (e.g. `AC97 <#API-for-AC97-Codec>`__), MIDI (e.g.
-`MPU-401 <#MIDI-MPU401-UART-Interface>`__), and other interfaces.
-Also, if you want a `proc file <#Proc-Interface>`__, define it here,
+Here you define the basic components such as `PCM <PCM Interface_>`__,
+mixer (e.g. `AC97 <API for AC97 Codec_>`__), MIDI (e.g.
+`MPU-401 <MIDI (MPU401-UART) Interface_>`__), and other interfaces.
+Also, if you want a `proc file <Proc Interface_>`__, define it here,
too.
6) Register the card instance.
@@ -941,7 +941,7 @@ The allocation of an interrupt source is done like this:
chip->irq = pci->irq;
where :c:func:`snd_mychip_interrupt()` is the interrupt handler
-defined `later <#pcm-interface-interrupt-handler>`__. Note that
+defined `later <PCM Interrupt Handler_>`__. Note that
``chip->irq`` should be defined only when :c:func:`request_irq()`
succeeded.
@@ -3104,7 +3104,7 @@ processing the output stream in the irq handler.
If the MPU-401 interface shares its interrupt with the other logical
devices on the card, set ``MPU401_INFO_IRQ_HOOK`` (see
-`below <#MIDI-Interrupt-Handler>`__).
+`below <MIDI Interrupt Handler_>`__).
Usually, the port address corresponds to the command port and port + 1
corresponds to the data port. If not, you may change the ``cport``
--
2.29.2
