Re: [RFC PATCH 00/22] Enhance VHOST to enable SoC-to-SoC communication

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jason,

On 7/3/2020 12:46 PM, Jason Wang wrote:
> 
> On 2020/7/2 下午9:35, Kishon Vijay Abraham I wrote:
>> Hi Jason,
>>
>> On 7/2/2020 3:40 PM, Jason Wang wrote:
>>> On 2020/7/2 下午5:51, Michael S. Tsirkin wrote:
>>>> On Thu, Jul 02, 2020 at 01:51:21PM +0530, Kishon Vijay Abraham I wrote:
>>>>> This series enhances Linux Vhost support to enable SoC-to-SoC
>>>>> communication over MMIO. This series enables rpmsg communication between
>>>>> two SoCs using both PCIe RC<->EP and HOST1-NTB-HOST2
>>>>>
>>>>> 1) Modify vhost to use standard Linux driver model
>>>>> 2) Add support in vring to access virtqueue over MMIO
>>>>> 3) Add vhost client driver for rpmsg
>>>>> 4) Add PCIe RC driver (uses virtio) and PCIe EP driver (uses vhost) for
>>>>>      rpmsg communication between two SoCs connected to each other
>>>>> 5) Add NTB Virtio driver and NTB Vhost driver for rpmsg communication
>>>>>      between two SoCs connected via NTB
>>>>> 6) Add configfs to configure the components
>>>>>
>>>>> UseCase1 :
>>>>>
>>>>>    VHOST RPMSG                     VIRTIO RPMSG
>>>>>         +                               +
>>>>>         |                               |
>>>>>         |                               |
>>>>>         |                               |
>>>>>         |                               |
>>>>> +-----v------+                 +------v-------+
>>>>> |   Linux    |                 |     Linux    |
>>>>> |  Endpoint  |                 | Root Complex |
>>>>> |            <----------------->              |
>>>>> |            |                 |              |
>>>>> |    SOC1    |                 |     SOC2     |
>>>>> +------------+                 +--------------+
>>>>>
>>>>> UseCase 2:
>>>>>
>>>>>        VHOST RPMSG                                      VIRTIO RPMSG
>>>>>             +                                                 +
>>>>>             |                                                 |
>>>>>             |                                                 |
>>>>>             |                                                 |
>>>>>             |                                                 |
>>>>>      +------v------+                                   +------v------+
>>>>>      |             |                                   |             |
>>>>>      |    HOST1    |                                   |    HOST2    |
>>>>>      |             |                                   |             |
>>>>>      +------^------+                                   +------^------+
>>>>>             |                                                 |
>>>>>             |                                                 |
>>>>> +---------------------------------------------------------------------+
>>>>> |  +------v------+                                   +------v------+  |
>>>>> |  |             |                                   |             |  |
>>>>> |  |     EP      |                                   |     EP      |  |
>>>>> |  | CONTROLLER1 |                                   | CONTROLLER2 |  |
>>>>> |  |             <----------------------------------->             |  |
>>>>> |  |             |                                   |             |  |
>>>>> |  |             |                                   |             |  |
>>>>> |  |             |  SoC With Multiple EP Instances   |             |  |
>>>>> |  |             |  (Configured using NTB Function)  |             |  |
>>>>> |  +-------------+                                   +-------------+  |
>>>>> +---------------------------------------------------------------------+
>>>>>
>>>>> Software Layering:
>>>>>
>>>>> The high-level SW layering should look something like below. This series
>>>>> adds support only for RPMSG VHOST, however something similar should be
>>>>> done for net and scsi. With that any vhost device (PCI, NTB, Platform
>>>>> device, user) can use any of the vhost client driver.
>>>>>
>>>>>
>>>>>       +----------------+  +-----------+  +------------+  +----------+
>>>>>       |  RPMSG VHOST   |  | NET VHOST |  | SCSI VHOST |  |    X     |
>>>>>       +-------^--------+  +-----^-----+  +-----^------+  +----^-----+
>>>>>               |                 |              |              |
>>>>>               |                 |              |              |
>>>>>               |                 |              |              |
>>>>> +-----------v-----------------v--------------v--------------v----------+
>>>>> |                            VHOST CORE                                |
>>>>> +--------^---------------^--------------------^------------------^-----+
>>>>>            |               |                    |                  |
>>>>>            |               |                    |                  |
>>>>>            |               |                    |                  |
>>>>> +--------v-------+  +----v------+  +----------v----------+  +----v-----+
>>>>> |  PCI EPF VHOST |  | NTB VHOST |  |PLATFORM DEVICE VHOST|  |    X     |
>>>>> +----------------+  +-----------+  +---------------------+  +----------+
>>>>>
>>>>> This was initially proposed here [1]
>>>>>
>>>>> [1] -> https://lore.kernel.org/r/2cf00ec4-1ed6-f66e-6897-006d1a5b6390@xxxxxx
>>>> I find this very interesting. A huge patchset so will take a bit
>>>> to review, but I certainly plan to do that. Thanks!
>>>
>>> Yes, it would be better if there's a git branch for us to have a look.
>> I've pushed the branch
>> https://github.com/kishon/linux-wip.git vhost_rpmsg_pci_ntb_rfc
> 
> 
> Thanks
> 
> 
>>> Btw, I'm not sure I get the big picture, but I vaguely feel some of the work is
>>> duplicated with vDPA (e.g the epf transport or vhost bus).
>> This is about connecting two different HW systems both running Linux and
>> doesn't necessarily involve virtualization.
> 
> 
> Right, this is something similar to VOP
> (Documentation/misc-devices/mic/mic_overview.rst). The different is the
> hardware I guess and VOP use userspace application to implement the device.

I'd also like to point out, this series tries to have communication between two
SoCs in vendor agnostic way. Since this series solves for 2 usecases (PCIe
RC<->EP and NTB), for the NTB case it directly plugs into NTB framework and any
of the HW in NTB below should be able to use a virtio-vhost communication

#ls drivers/ntb/hw/
amd  epf  idt  intel  mscc

And similarly for the PCIe RC<->EP communication, this adds a generic endpoint
function driver and hence any SoC that supports configurable PCIe endpoint can
use virtio-vhost communication

# ls drivers/pci/controller/dwc/*ep*
drivers/pci/controller/dwc/pcie-designware-ep.c
drivers/pci/controller/dwc/pcie-uniphier-ep.c
drivers/pci/controller/dwc/pci-layerscape-ep.c

> 
> 
>>   So there is no guest or host as in
>> virtualization but two entirely different systems connected via PCIe cable, one
>> acting as guest and one as host. So one system will provide virtio
>> functionality reserving memory for virtqueues and the other provides vhost
>> functionality providing a way to access the virtqueues in virtio memory. One is
>> source and the other is sink and there is no intermediate entity. (vhost was
>> probably intermediate entity in virtualization?)
> 
> 
> (Not a native English speaker) but "vhost" could introduce some confusion for
> me since it was use for implementing virtio backend for userspace drivers. I
> guess "vringh" could be better.

Initially I had named this vringh but later decided to choose vhost instead of
vringh. vhost is still a virtio backend (not necessarily userspace) though it
now resides in an entirely different system. Whatever virtio is for a frontend
system, vhost can be that for a backend system. vring can be for accessing
virtqueue and can be used either in frontend or backend.
> 
> 
>>
>>> Have you considered to implement these through vDPA?
>> IIUC vDPA only provides an interface to userspace and an in-kernel rpmsg driver
>> or vhost net driver is not provided.
>>
>> The HW connection looks something like https://pasteboard.co/JfMVVHC.jpg
>> (usecase2 above),
> 
> 
> I see.
> 
> 
>>   all the boards run Linux. The middle board provides NTB
>> functionality and board on either side provides virtio/vhost functionality and
>> transfer data using rpmsg.
> 
> 
> So I wonder whether it's worthwhile for a new bus. Can we use the existed
> virtio-bus/drivers? It might work as, except for the epf transport, we can
> introduce a epf "vhost" transport driver.

IMHO we'll need two buses one for frontend and other for backend because the
two components can then co-operate/interact with each other to provide a
functionality. Though both will seemingly provide similar callbacks, they are
both provide symmetrical or complimentary funcitonality and need not be same or
identical.

Having the same bus can also create sequencing issues.

If you look at virtio_dev_probe() of virtio_bus

device_features = dev->config->get_features(dev);

Now if we use same bus for both front-end and back-end, both will try to
get_features when there has been no set_features. Ideally vhost device should
be initialized first with the set of features it supports. Vhost and virtio
should use "status" and "features" complimentarily and not identically.

virtio device (or frontend) cannot be initialized before vhost device (or
backend) gets initialized with data such as features. Similarly vhost (backend)
cannot access virqueues or buffers before virtio (frontend) sets
VIRTIO_CONFIG_S_DRIVER_OK whereas that requirement is not there for virtio as
the physical memory for virtqueues are created by virtio (frontend).

> 
> It will have virtqueues but only used for the communication between itself and
> uppter virtio driver. And it will have vringh queues which will be probe by
> virtio epf transport drivers. And it needs to do datacopy between virtqueue and
> vringh queues.
> 
> It works like:
> 
> virtio drivers <- virtqueue/virtio-bus -> epf vhost drivers <- vringh queue/epf>
> 
> The advantages is that there's no need for writing new buses and drivers.

I think this will work however there is an addtional copy between vringh queue
and virtqueue, in some cases adds latency because of forwarding interrupts
between vhost and virtio driver, vhost drivers providing features (which means
it has to be aware of which virtio driver will be connected).
virtio drivers (front end) generally access the buffers from it's local memory
but when in backend it can access over MMIO (like PCI EPF or NTB) or userspace.
> 
> Does this make sense?

Two copies in my opinion is an issue but lets get others opinions as well.

Thanks for your suggestions!

Regards
Kishon

> 
> Thanks
> 
> 
>>
>> Thanks
>> Kishon
>>
>>> Thanks
>>>
>>>
>>>>> Kishon Vijay Abraham I (22):
>>>>>     vhost: Make _feature_ bits a property of vhost device
>>>>>     vhost: Introduce standard Linux driver model in VHOST
>>>>>     vhost: Add ops for the VHOST driver to configure VHOST device
>>>>>     vringh: Add helpers to access vring in MMIO
>>>>>     vhost: Add MMIO helpers for operations on vhost virtqueue
>>>>>     vhost: Introduce configfs entry for configuring VHOST
>>>>>     virtio_pci: Use request_threaded_irq() instead of request_irq()
>>>>>     rpmsg: virtio_rpmsg_bus: Disable receive virtqueue callback when
>>>>>       reading messages
>>>>>     rpmsg: Introduce configfs entry for configuring rpmsg
>>>>>     rpmsg: virtio_rpmsg_bus: Add Address Service Notification support
>>>>>     rpmsg: virtio_rpmsg_bus: Move generic rpmsg structure to
>>>>>       rpmsg_internal.h
>>>>>     virtio: Add ops to allocate and free buffer
>>>>>     rpmsg: virtio_rpmsg_bus: Use virtio_alloc_buffer() and
>>>>>       virtio_free_buffer()
>>>>>     rpmsg: Add VHOST based remote processor messaging bus
>>>>>     samples/rpmsg: Setup delayed work to send message
>>>>>     samples/rpmsg: Wait for address to be bound to rpdev for sending
>>>>>       message
>>>>>     rpmsg.txt: Add Documentation to configure rpmsg using configfs
>>>>>     virtio_pci: Add VIRTIO driver for VHOST on Configurable PCIe Endpoint
>>>>>       device
>>>>>     PCI: endpoint: Add EP function driver to provide VHOST interface
>>>>>     NTB: Add a new NTB client driver to implement VIRTIO functionality
>>>>>     NTB: Add a new NTB client driver to implement VHOST functionality
>>>>>     NTB: Describe the ntb_virtio and ntb_vhost client in the documentation
>>>>>
>>>>>    Documentation/driver-api/ntb.rst              |   11 +
>>>>>    Documentation/rpmsg.txt                       |   56 +
>>>>>    drivers/ntb/Kconfig                           |   18 +
>>>>>    drivers/ntb/Makefile                          |    2 +
>>>>>    drivers/ntb/ntb_vhost.c                       |  776 +++++++++++
>>>>>    drivers/ntb/ntb_virtio.c                      |  853 ++++++++++++
>>>>>    drivers/ntb/ntb_virtio.h                      |   56 +
>>>>>    drivers/pci/endpoint/functions/Kconfig        |   11 +
>>>>>    drivers/pci/endpoint/functions/Makefile       |    1 +
>>>>>    .../pci/endpoint/functions/pci-epf-vhost.c    | 1144 ++++++++++++++++
>>>>>    drivers/rpmsg/Kconfig                         |   10 +
>>>>>    drivers/rpmsg/Makefile                        |    3 +-
>>>>>    drivers/rpmsg/rpmsg_cfs.c                     |  394 ++++++
>>>>>    drivers/rpmsg/rpmsg_core.c                    |    7 +
>>>>>    drivers/rpmsg/rpmsg_internal.h                |  136 ++
>>>>>    drivers/rpmsg/vhost_rpmsg_bus.c               | 1151 +++++++++++++++++
>>>>>    drivers/rpmsg/virtio_rpmsg_bus.c              |  184 ++-
>>>>>    drivers/vhost/Kconfig                         |    1 +
>>>>>    drivers/vhost/Makefile                        |    2 +-
>>>>>    drivers/vhost/net.c                           |   10 +-
>>>>>    drivers/vhost/scsi.c                          |   24 +-
>>>>>    drivers/vhost/test.c                          |   17 +-
>>>>>    drivers/vhost/vdpa.c                          |    2 +-
>>>>>    drivers/vhost/vhost.c                         |  730 ++++++++++-
>>>>>    drivers/vhost/vhost_cfs.c                     |  341 +++++
>>>>>    drivers/vhost/vringh.c                        |  332 +++++
>>>>>    drivers/vhost/vsock.c                         |   20 +-
>>>>>    drivers/virtio/Kconfig                        |    9 +
>>>>>    drivers/virtio/Makefile                       |    1 +
>>>>>    drivers/virtio/virtio_pci_common.c            |   25 +-
>>>>>    drivers/virtio/virtio_pci_epf.c               |  670 ++++++++++
>>>>>    include/linux/mod_devicetable.h               |    6 +
>>>>>    include/linux/rpmsg.h                         |    6 +
>>>>>    {drivers/vhost => include/linux}/vhost.h      |  132 +-
>>>>>    include/linux/virtio.h                        |    3 +
>>>>>    include/linux/virtio_config.h                 |   42 +
>>>>>    include/linux/vringh.h                        |   46 +
>>>>>    samples/rpmsg/rpmsg_client_sample.c           |   32 +-
>>>>>    tools/virtio/virtio_test.c                    |    2 +-
>>>>>    39 files changed, 7083 insertions(+), 183 deletions(-)
>>>>>    create mode 100644 drivers/ntb/ntb_vhost.c
>>>>>    create mode 100644 drivers/ntb/ntb_virtio.c
>>>>>    create mode 100644 drivers/ntb/ntb_virtio.h
>>>>>    create mode 100644 drivers/pci/endpoint/functions/pci-epf-vhost.c
>>>>>    create mode 100644 drivers/rpmsg/rpmsg_cfs.c
>>>>>    create mode 100644 drivers/rpmsg/vhost_rpmsg_bus.c
>>>>>    create mode 100644 drivers/vhost/vhost_cfs.c
>>>>>    create mode 100644 drivers/virtio/virtio_pci_epf.c
>>>>>    rename {drivers/vhost => include/linux}/vhost.h (66%)
>>>>>
>>>>> -- 
>>>>> 2.17.1
>>>>>
> 



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux