Re: [RFC PATCH 00/22] Enhance VHOST to enable SoC-to-SoC communication

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jason,

On 7/2/2020 3:40 PM, Jason Wang wrote:
> 
> On 2020/7/2 下午5:51, Michael S. Tsirkin wrote:
>> On Thu, Jul 02, 2020 at 01:51:21PM +0530, Kishon Vijay Abraham I wrote:
>>> This series enhances Linux Vhost support to enable SoC-to-SoC
>>> communication over MMIO. This series enables rpmsg communication between
>>> two SoCs using both PCIe RC<->EP and HOST1-NTB-HOST2
>>>
>>> 1) Modify vhost to use standard Linux driver model
>>> 2) Add support in vring to access virtqueue over MMIO
>>> 3) Add vhost client driver for rpmsg
>>> 4) Add PCIe RC driver (uses virtio) and PCIe EP driver (uses vhost) for
>>>     rpmsg communication between two SoCs connected to each other
>>> 5) Add NTB Virtio driver and NTB Vhost driver for rpmsg communication
>>>     between two SoCs connected via NTB
>>> 6) Add configfs to configure the components
>>>
>>> UseCase1 :
>>>
>>>   VHOST RPMSG                     VIRTIO RPMSG
>>>        +                               +
>>>        |                               |
>>>        |                               |
>>>        |                               |
>>>        |                               |
>>> +-----v------+                 +------v-------+
>>> |   Linux    |                 |     Linux    |
>>> |  Endpoint  |                 | Root Complex |
>>> |            <----------------->              |
>>> |            |                 |              |
>>> |    SOC1    |                 |     SOC2     |
>>> +------------+                 +--------------+
>>>
>>> UseCase 2:
>>>
>>>       VHOST RPMSG                                      VIRTIO RPMSG
>>>            +                                                 +
>>>            |                                                 |
>>>            |                                                 |
>>>            |                                                 |
>>>            |                                                 |
>>>     +------v------+                                   +------v------+
>>>     |             |                                   |             |
>>>     |    HOST1    |                                   |    HOST2    |
>>>     |             |                                   |             |
>>>     +------^------+                                   +------^------+
>>>            |                                                 |
>>>            |                                                 |
>>> +---------------------------------------------------------------------+
>>> |  +------v------+                                   +------v------+  |
>>> |  |             |                                   |             |  |
>>> |  |     EP      |                                   |     EP      |  |
>>> |  | CONTROLLER1 |                                   | CONTROLLER2 |  |
>>> |  |             <----------------------------------->             |  |
>>> |  |             |                                   |             |  |
>>> |  |             |                                   |             |  |
>>> |  |             |  SoC With Multiple EP Instances   |             |  |
>>> |  |             |  (Configured using NTB Function)  |             |  |
>>> |  +-------------+                                   +-------------+  |
>>> +---------------------------------------------------------------------+
>>>
>>> Software Layering:
>>>
>>> The high-level SW layering should look something like below. This series
>>> adds support only for RPMSG VHOST, however something similar should be
>>> done for net and scsi. With that any vhost device (PCI, NTB, Platform
>>> device, user) can use any of the vhost client driver.
>>>
>>>
>>>      +----------------+  +-----------+  +------------+  +----------+
>>>      |  RPMSG VHOST   |  | NET VHOST |  | SCSI VHOST |  |    X     |
>>>      +-------^--------+  +-----^-----+  +-----^------+  +----^-----+
>>>              |                 |              |              |
>>>              |                 |              |              |
>>>              |                 |              |              |
>>> +-----------v-----------------v--------------v--------------v----------+
>>> |                            VHOST CORE                                |
>>> +--------^---------------^--------------------^------------------^-----+
>>>           |               |                    |                  |
>>>           |               |                    |                  |
>>>           |               |                    |                  |
>>> +--------v-------+  +----v------+  +----------v----------+  +----v-----+
>>> |  PCI EPF VHOST |  | NTB VHOST |  |PLATFORM DEVICE VHOST|  |    X     |
>>> +----------------+  +-----------+  +---------------------+  +----------+
>>>
>>> This was initially proposed here [1]
>>>
>>> [1] -> https://lore.kernel.org/r/2cf00ec4-1ed6-f66e-6897-006d1a5b6390@xxxxxx
>>
>> I find this very interesting. A huge patchset so will take a bit
>> to review, but I certainly plan to do that. Thanks!
> 
> 
> Yes, it would be better if there's a git branch for us to have a look.

I've pushed the branch
https://github.com/kishon/linux-wip.git vhost_rpmsg_pci_ntb_rfc
> 
> Btw, I'm not sure I get the big picture, but I vaguely feel some of the work is
> duplicated with vDPA (e.g the epf transport or vhost bus).

This is about connecting two different HW systems both running Linux and
doesn't necessarily involve virtualization. So there is no guest or host as in
virtualization but two entirely different systems connected via PCIe cable, one
acting as guest and one as host. So one system will provide virtio
functionality reserving memory for virtqueues and the other provides vhost
functionality providing a way to access the virtqueues in virtio memory. One is
source and the other is sink and there is no intermediate entity. (vhost was
probably intermediate entity in virtualization?)

> 
> Have you considered to implement these through vDPA?

IIUC vDPA only provides an interface to userspace and an in-kernel rpmsg driver
or vhost net driver is not provided.

The HW connection looks something like https://pasteboard.co/JfMVVHC.jpg
(usecase2 above), all the boards run Linux. The middle board provides NTB
functionality and board on either side provides virtio/vhost functionality and
transfer data using rpmsg.

Thanks
Kishon

> 
> Thanks
> 
> 
>>
>>> Kishon Vijay Abraham I (22):
>>>    vhost: Make _feature_ bits a property of vhost device
>>>    vhost: Introduce standard Linux driver model in VHOST
>>>    vhost: Add ops for the VHOST driver to configure VHOST device
>>>    vringh: Add helpers to access vring in MMIO
>>>    vhost: Add MMIO helpers for operations on vhost virtqueue
>>>    vhost: Introduce configfs entry for configuring VHOST
>>>    virtio_pci: Use request_threaded_irq() instead of request_irq()
>>>    rpmsg: virtio_rpmsg_bus: Disable receive virtqueue callback when
>>>      reading messages
>>>    rpmsg: Introduce configfs entry for configuring rpmsg
>>>    rpmsg: virtio_rpmsg_bus: Add Address Service Notification support
>>>    rpmsg: virtio_rpmsg_bus: Move generic rpmsg structure to
>>>      rpmsg_internal.h
>>>    virtio: Add ops to allocate and free buffer
>>>    rpmsg: virtio_rpmsg_bus: Use virtio_alloc_buffer() and
>>>      virtio_free_buffer()
>>>    rpmsg: Add VHOST based remote processor messaging bus
>>>    samples/rpmsg: Setup delayed work to send message
>>>    samples/rpmsg: Wait for address to be bound to rpdev for sending
>>>      message
>>>    rpmsg.txt: Add Documentation to configure rpmsg using configfs
>>>    virtio_pci: Add VIRTIO driver for VHOST on Configurable PCIe Endpoint
>>>      device
>>>    PCI: endpoint: Add EP function driver to provide VHOST interface
>>>    NTB: Add a new NTB client driver to implement VIRTIO functionality
>>>    NTB: Add a new NTB client driver to implement VHOST functionality
>>>    NTB: Describe the ntb_virtio and ntb_vhost client in the documentation
>>>
>>>   Documentation/driver-api/ntb.rst              |   11 +
>>>   Documentation/rpmsg.txt                       |   56 +
>>>   drivers/ntb/Kconfig                           |   18 +
>>>   drivers/ntb/Makefile                          |    2 +
>>>   drivers/ntb/ntb_vhost.c                       |  776 +++++++++++
>>>   drivers/ntb/ntb_virtio.c                      |  853 ++++++++++++
>>>   drivers/ntb/ntb_virtio.h                      |   56 +
>>>   drivers/pci/endpoint/functions/Kconfig        |   11 +
>>>   drivers/pci/endpoint/functions/Makefile       |    1 +
>>>   .../pci/endpoint/functions/pci-epf-vhost.c    | 1144 ++++++++++++++++
>>>   drivers/rpmsg/Kconfig                         |   10 +
>>>   drivers/rpmsg/Makefile                        |    3 +-
>>>   drivers/rpmsg/rpmsg_cfs.c                     |  394 ++++++
>>>   drivers/rpmsg/rpmsg_core.c                    |    7 +
>>>   drivers/rpmsg/rpmsg_internal.h                |  136 ++
>>>   drivers/rpmsg/vhost_rpmsg_bus.c               | 1151 +++++++++++++++++
>>>   drivers/rpmsg/virtio_rpmsg_bus.c              |  184 ++-
>>>   drivers/vhost/Kconfig                         |    1 +
>>>   drivers/vhost/Makefile                        |    2 +-
>>>   drivers/vhost/net.c                           |   10 +-
>>>   drivers/vhost/scsi.c                          |   24 +-
>>>   drivers/vhost/test.c                          |   17 +-
>>>   drivers/vhost/vdpa.c                          |    2 +-
>>>   drivers/vhost/vhost.c                         |  730 ++++++++++-
>>>   drivers/vhost/vhost_cfs.c                     |  341 +++++
>>>   drivers/vhost/vringh.c                        |  332 +++++
>>>   drivers/vhost/vsock.c                         |   20 +-
>>>   drivers/virtio/Kconfig                        |    9 +
>>>   drivers/virtio/Makefile                       |    1 +
>>>   drivers/virtio/virtio_pci_common.c            |   25 +-
>>>   drivers/virtio/virtio_pci_epf.c               |  670 ++++++++++
>>>   include/linux/mod_devicetable.h               |    6 +
>>>   include/linux/rpmsg.h                         |    6 +
>>>   {drivers/vhost => include/linux}/vhost.h      |  132 +-
>>>   include/linux/virtio.h                        |    3 +
>>>   include/linux/virtio_config.h                 |   42 +
>>>   include/linux/vringh.h                        |   46 +
>>>   samples/rpmsg/rpmsg_client_sample.c           |   32 +-
>>>   tools/virtio/virtio_test.c                    |    2 +-
>>>   39 files changed, 7083 insertions(+), 183 deletions(-)
>>>   create mode 100644 drivers/ntb/ntb_vhost.c
>>>   create mode 100644 drivers/ntb/ntb_virtio.c
>>>   create mode 100644 drivers/ntb/ntb_virtio.h
>>>   create mode 100644 drivers/pci/endpoint/functions/pci-epf-vhost.c
>>>   create mode 100644 drivers/rpmsg/rpmsg_cfs.c
>>>   create mode 100644 drivers/rpmsg/vhost_rpmsg_bus.c
>>>   create mode 100644 drivers/vhost/vhost_cfs.c
>>>   create mode 100644 drivers/virtio/virtio_pci_epf.c
>>>   rename {drivers/vhost => include/linux}/vhost.h (66%)
>>>
>>> -- 
>>> 2.17.1
>>>
> 



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux