Re: [PATCH v6 0/6] KASan for arm

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 19, 2019 at 1:14 AM Florian Fainelli <f.fainelli@xxxxxxxxx> wrote:
> On 11/15/19 3:44 AM, Marco Felsch wrote:
> >
> > With your v7 it is working on my imx6 but unfortunately I can't run my
> > gstreamer testcase. My CPU load goes to 100% after starting gstreamer
> > and nothing happens.. But the test_kasan module works =) So I decided to
> > check a imx6quadplus but this target did not boot.. I used another
> > toolchain for the imx6quadplus gcc-9 instead of gcc-8. So it seems that
> > something went wrong during compilation. Because you didn't changed
> > something within the logic.
> >
> > I wonder why we must not define the CONFIG_KASAN_SHADOW_OFFSET for arm.
>
> That is was oversight. I have pushed updates to the branch here:
>
> https://github.com/ffainelli/linux/pull/new/kasan-v7

I just git Kasan back on my radar because it needs to be fixed some day.

I took this branch for a ride on some QEMU and some real hardware.
Here I use the test module and just hacked it into the kernel instead of
as a module, it then crashes predictably but performs all the KASan
tests first and it works file, as in provokes the right warnings from
KASan.

Tested systems:

QEMU ARM RealView PBA8
QEMU ARM RealView PBX A9
QEMU ARM Versatile AB
Hardware Integrator CP
Hardware Versatile AB with IB2

Can we start to submit these patches to Russell's patch tracker?
Any more testing I should be doing?

Yours,
Linus Walleij



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux