Re: [PATCH v6 0/6] KASan for arm

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Florian,

On 19-11-15 08:08, Marco Felsch wrote:
> Hi Florian,
> 
> On 19-11-14 15:01, Florian Fainelli wrote:
> > Hello Marco,
> > 
> > On 11/14/19 10:12 AM, Marco Felsch wrote:
> > > Hi Florian,
> > > 
> > > first of all, many thanks for your work on this series =) I picked your
> > > and Arnd patches to make it compilable. Now it's compiling but my imx6q
> > > board didn't boot anymore. I debugged the code and found that the branch
> > > to 'start_kernel' won't be reached
> > > 
> > > 8<------- arch/arm/kernel/head-common.S -------
> > > ....
> > > 
> > > #ifdef CONFIG_KASAN
> > >         bl      kasan_early_init
> > > #endif
> > > 	mov     lr, #0
> > > 	b       start_kernel
> > > ENDPROC(__mmap_switched)
> > > 
> > > ....
> > > 8<----------------------------------------------
> > > 
> > > Now, I found also that 'KASAN_SHADOW_OFFSET' isn't set due to missing
> > > 'CONFIG_KASAN_SHADOW_OFFSET' and so no '-fasan-shadow-offset=xxxxx' is
> > > added. Can that be the reason why my board isn't booted anymore?
> > 
> > The latest that I have is here, though not yet submitted since I needed
> > to solve one issue on a specific platform with a lot of memory:
> > 
> > https://github.com/ffainelli/linux/pull/new/kasan-v7
> 
> Thanks for that hint, I will try this series too :) I read that you
> wanna prepare a v7 but didn't found it ^^
> 
> > Can you share your branch as well? I did not pick all of Arnd's patches
> > since some appeared to be seemingly independent from KASan on ARM. This
> > is the KASAN related options that are set in my configuration:
> 
> Of course I will push it to github and inform you shortly.

Here comes the link:
https://github.com/medude/linux/tree/v5.4/topic/kasan-arm.v7

I just applied Arnds Patche which you didn't added into your v7.

> > grep KASAN build/linux-custom/.config
> > CONFIG_HAVE_ARCH_KASAN=y
> > CONFIG_CC_HAS_KASAN_GENERIC=y
> > CONFIG_KASAN=y
> > CONFIG_KASAN_GENERIC=y
> > CONFIG_KASAN_OUTLINE=y
> > # CONFIG_KASAN_INLINE is not set
> > CONFIG_KASAN_STACK=1
> > CONFIG_TEST_KASAN=m
> 
> My config is:
> 
> CONFIG_HAVE_ARCH_KASAN=y
> CONFIG_CC_HAS_KASAN_GENERIC=y
> CONFIG_KASAN=y
> CONFIG_KASAN_GENERIC=y
> CONFIG_KASAN_OUTLINE=y
> # CONFIG_KASAN_INLINE is not set
> CONFIG_KASAN_STACK=1
> # CONFIG_TEST_KASAN is not set
> 
> > are you using something different by any chance?
> 
> Unfortunately not.

With your v7 it is working on my imx6 but unfortunately I can't run my
gstreamer testcase. My CPU load goes to 100% after starting gstreamer
and nothing happens.. But the test_kasan module works =) So I decided to
check a imx6quadplus but this target did not boot.. I used another
toolchain for the imx6quadplus gcc-9 instead of gcc-8. So it seems that
something went wrong during compilation. Because you didn't changed
something within the logic.

I wonder why we must not define the CONFIG_KASAN_SHADOW_OFFSET for arm.

Regards,
  Marco

> Regards,
>   Marco
> 
> > -- 
> > Florian
> > 
> 



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux