Re: [PATCH v11 3/6] of: property: Add functional dependency link from DT bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 4, 2019 at 8:37 AM Greg Kroah-Hartman
<gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
>
> On Wed, Sep 11, 2019 at 03:29:25AM -0700, Stephen Boyd wrote:
> > Quoting Saravana Kannan (2019-09-04 14:11:22)
> > > Add device links after the devices are created (but before they are
> > > probed) by looking at common DT bindings like clocks and
> > > interconnects.
> > >
> > > Automatically adding device links for functional dependencies at the
> > > framework level provides the following benefits:
> > >
> > > - Optimizes device probe order and avoids the useless work of
> > >   attempting probes of devices that will not probe successfully
> > >   (because their suppliers aren't present or haven't probed yet).
> > >
> > >   For example, in a commonly available mobile SoC, registering just
> > >   one consumer device's driver at an initcall level earlier than the
> > >   supplier device's driver causes 11 failed probe attempts before the
> > >   consumer device probes successfully. This was with a kernel with all
> > >   the drivers statically compiled in. This problem gets a lot worse if
> > >   all the drivers are loaded as modules without direct symbol
> > >   dependencies.
> > >
> > > - Supplier devices like clock providers, interconnect providers, etc
> > >   need to keep the resources they provide active and at a particular
> > >   state(s) during boot up even if their current set of consumers don't
> > >   request the resource to be active. This is because the rest of the
> > >   consumers might not have probed yet and turning off the resource
> > >   before all the consumers have probed could lead to a hang or
> > >   undesired user experience.
> > >
> > >   Some frameworks (Eg: regulator) handle this today by turning off
> > >   "unused" resources at late_initcall_sync and hoping all the devices
> > >   have probed by then. This is not a valid assumption for systems with
> > >   loadable modules. Other frameworks (Eg: clock) just don't handle
> > >   this due to the lack of a clear signal for when they can turn off
> > >   resources.
> >
> > The clk framework disables unused clks at late_initcall_sync. What do
> > you mean clk framework doesn't turn them off because of a clear signal?
>
> There's a number of minor things you pointed out in this review.
>
> Saravana, can you send a follow-on patch for the minor code cleanups
> like formatting and the like that was found here?

Will do next week.

Thanks,
Saravana

>
> > > +static int of_link_to_phandle(struct device *dev, struct device_node *sup_np)
> > > +{
> > > +       struct device *sup_dev;
> > > +       u32 dl_flags = DL_FLAG_AUTOPROBE_CONSUMER;
> >
> > Is it really a u32 instead of an unsigned int or unsigned long?
> >
> > > +       int ret = 0;
> > > +       struct device_node *tmp_np = sup_np;
> > > +
> > > +       of_node_get(sup_np);
> > > +       /*
> > > +        * Find the device node that contains the supplier phandle.  It may be
> > > +        * @sup_np or it may be an ancestor of @sup_np.
> > > +        */
> > > +       while (sup_np && !of_find_property(sup_np, "compatible", NULL))
> > > +               sup_np = of_get_next_parent(sup_np);
> >
> > I don't get this. This is assuming that drivers are only probed for
> > device nodes that have a compatible string? What about drivers that make
> > sub-devices for clk support that have drivers in drivers/clk/ that then
> > attach at runtime later? This happens sometimes for MFDs that want to
> > split the functionality across the driver tree to the respective
> > subsystems.
>
> For that, the link would not be there, correct?
>
> > > +static int of_link_property(struct device *dev, struct device_node *con_np,
> > > +                            const char *prop_name)
> > > +{
> > > +       struct device_node *phandle;
> > > +       const struct supplier_bindings *s = bindings;
> > > +       unsigned int i = 0;
> > > +       bool matched = false;
> > > +       int ret = 0;
> > > +
> > > +       /* Do not stop at first failed link, link all available suppliers. */
> > > +       while (!matched && s->parse_prop) {
> > > +               while ((phandle = s->parse_prop(con_np, prop_name, i))) {
> > > +                       matched = true;
> > > +                       i++;
> > > +                       if (of_link_to_phandle(dev, phandle) == -EAGAIN)
> > > +                               ret = -EAGAIN;
> >
> > And don't break?
>
> There was comments before about how this is not needed.  Frank asked
> that the comment be removed.  And now you point it out again :)
>
> Look at the comment a few lines up, we have to go through all of the
> suppliers.
>
> > > +static int __of_link_to_suppliers(struct device *dev,
> >
> > Why the double underscore?
> >
> > > +                                 struct device_node *con_np)
> > > +{
> > > +       struct device_node *child;
> > > +       struct property *p;
> > > +       int ret = 0;
> > > +
> > > +       for_each_property_of_node(con_np, p)
> > > +               if (of_link_property(dev, con_np, p->name))
> > > +                       ret = -EAGAIN;
> >
> > Same comment.
>
> Same response as above :)
>
> thanks,
>
> greg k-h



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux