Re: [PATCH v2 06/11] arm64: dts: exynos5433: add support for thermal trip irq-mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Krzysztof,

On 11/12/18 10:00 AM, Krzysztof Kozlowski wrote:
> Thanks Lukasz for patches. I like your work!
> 
> I have few more comments which will probably apply for all the DTS commits.
> 
> On Wed, 7 Nov 2018 at 18:10, Lukasz Luba <l.luba@xxxxxxxxxxxxxxxxxxx> wrote:
>>
>> This patch adds support for new flag which indicates
> 
> This patch does not add support. Support for flag was added in your
> first drivers/thermal patches in this set. This patch adds new flag.
> (and does something more, so read on)
Got it, will change the commit message.
> 
>> that trip point triggers IRQ when temperature is met.
>> Exynos5433 supports 8 trip point which will trigger IRQ.
> 
> /8 trip point/8 trip points/
> 
>> Above that number other trip points should be registered
>> without 'irq-mode' flag.
> 
> Please fix the line-wrap.
OK
> 
>>
>> Cc: Kukjin Kim <kgene@xxxxxxxxxx>
>> Cc: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
>> Cc: devicetree@xxxxxxxxxxxxxxx
>> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
>> Cc: linux-samsung-soc@xxxxxxxxxxxxxxx
>> Signed-off-by: Lukasz Luba <l.luba@xxxxxxxxxxxxxxxxxxx>
>> ---
>>   arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 105 ++++++++++++++++---------
>>   1 file changed, 70 insertions(+), 35 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
>> index fe3a0b1..c4330f6 100644
>> --- a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
>> @@ -17,37 +17,44 @@ thermal-zones {
>>                          atlas0_alert_0: atlas0-alert-0 {
>>                                  temperature = <65000>;  /* millicelsius */
>>                                  hysteresis = <1000>;    /* millicelsius */
>> -                               type = "active";
>> +                               type = "passive";
> 
> This change is not explained in commit msg.
> 
> Basically you are doing here two things (related to each other). You
> clearly define which trip points are IRQ-type and you correct the type
> of trip point. Active is incorrect. This second thing is missing in
> your commit msg and I believe it is main reason behind this patch. You
> should focus then on this reason - start from it. Subject could be
> like "Use proper passive type for thermal trip points".
> 
> Without this explanation I don't see the strong reason behind that
> patch. IOW, everything was working fine before... so why adding this
> new flag? Or maybe something was not fine... and then it is real
> reason why you are sending the patch. Usually commit message should
> answer to the most important question "WHY". Now, it explains
> "WHAT"... but I can see it from the source code. However from the code
> it is not easy to guess WHY.

OK, I will add the explanation 'why' similar to description from the
cover-letter to all the patches which add this flag in DT files.

> 
> Best regards,
> Krzysztof
> 
> 

Thank you for the review.

Regards,
Lukasz



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux