On 05/14/2018 10:19 AM, Kim Phillips wrote:
> - Align and show updated ls devices output from the TC2, based on
> current driver
>
> - Provide an example from an ETMv4 based system (Juno)
>
> - Reflect changes to the way the RAM write pointer is accessed since
> it got changed in commit 7d83d17795ef ("coresight: tmc: adding sysFS
> management entries").
>
> Cc: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
> Cc: Jonathan Corbet <corbet@xxxxxxx>
> Signed-off-by: Kim Phillips <kim.phillips@xxxxxxx>
> ---
> v2: address Mathieu's comment about clarifying the sinks on the Juno
> vs. TC2 platforms.
>
> Documentation/trace/coresight.txt | 41 +++++++++++++++++++------------
> 1 file changed, 25 insertions(+), 16 deletions(-)
>
> diff --git a/Documentation/trace/coresight.txt
> b/Documentation/trace/coresight.txt index 6f0120c3a4f1..134994e9fa6d
> 100644
> --- a/Documentation/trace/coresight.txt
> +++ b/Documentation/trace/coresight.txt
> @@ -144,10 +144,22 @@ If everything goes well during the registration
> process the new devices will show up under /sys/bus/coresight/devices,
> as showns here for a TC2 platform:
as shown here
> root:~# ls /sys/bus/coresight/devices/
> -replicator 20030000.tpiu 2201c000.ptm 2203c000.etm 2203e000.etm
> -20010000.etb 20040000.funnel 2201d000.ptm 2203d000.etm
> +20010000.etb 20040000.funnel 2201d000.ptm 2203d000.etm
> replicator +20030000.tpiu 2201c000.ptm 2203c000.etm
> 2203e000.etm root:~#
>
> +and here for a Juno platform:
> +
> +root@juno:~# ls /sys/bus/coresight/devices/
> +20010000.etf 20120000.replicator 22040000.etm
> 230c0000.funnel +20030000.tpiu 20130000.funnel
> 220c0000.funnel 23140000.etm +20040000.funnel
> 20140000.etf 22140000.etm 23240000.etm
> +20070000.etr 20150000.funnel 23040000.etm
> 23340000.etm +root@juno:~# +
> +Note that on Juno users can select the ETF, ETR and TPIU as a sink
> target while +on TC2, the ETB and TPIU can be selected.
> +
> The functions take a "struct coresight_device", which looks like this:
>
> struct coresight_desc {
> @@ -193,16 +205,16 @@ the information carried in "THIS_MODULE".
> How to use the tracer modules
> -----------------------------
>
> -Before trace collection can start, a coresight sink needs to be
> identify. +Before trace collection can start, a coresight sink needs to
The - and + lines seems to be merged...
> be identified. There is no limit on the amount of sinks (nor sources)
> that can be enabled at any given moment. As a generic operation, all
> device pertaining to the sink class will have an "active" entry in
> sysfs:
> root:/sys/bus/coresight/devices# ls
> -replicator 20030000.tpiu 2201c000.ptm 2203c000.etm 2203e000.etm
> -20010000.etb 20040000.funnel 2201d000.ptm 2203d000.etm
> +20010000.etb 20040000.funnel 2201d000.ptm 2203d000.etm
> replicator +20030000.tpiu 2201c000.ptm 2203c000.etm
> 2203e000.etm root:/sys/bus/coresight/devices# ls 20010000.etb
> -enable_sink status trigger_cntr
> +enable_sink mgmt power subsystem trigger_cntr uevent
> root:/sys/bus/coresight/devices# echo 1 > 20010000.etb/enable_sink
> root:/sys/bus/coresight/devices# cat 20010000.etb/enable_sink
> 1
> @@ -216,16 +228,13 @@ trigger a trace capture:
> root:/sys/bus/coresight/devices# echo 1 > 2201c000.ptm/enable_source
> root:/sys/bus/coresight/devices# cat 2201c000.ptm/enable_source
> 1
> -root:/sys/bus/coresight/devices# cat 20010000.etb/status
> -Depth: 0x2000
> -Status: 0x1
> -RAM read ptr: 0x0
> -RAM wrt ptr: 0x19d3 <----- The write pointer is moving
> -Trigger cnt: 0x0
> -Control: 0x1
> -Flush status: 0x0
> -Flush ctrl: 0x2001
> -root:/sys/bus/coresight/devices#
> +
> +Observe the write pointer moving:
> +
> +root:/sys/bus/coresight/devices# cat 20010000.etb/mgmt/rwp
> +0x1a8
> +root:/sys/bus/coresight/devices# cat 20010000.etb/mgmt/rwp
> +0x19a6
>
> Trace collection is stopped the same way:
>
>
--
~Randy
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
