- Align and show updated ls devices output from the TC2, based on
current driver
- Provide an example from an ETMv4 based system (Juno)
- Reflect changes to the way the RAM write pointer is accessed since
it got changed in commit 7d83d17795ef ("coresight: tmc: adding sysFS
management entries").
Cc: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
Cc: Jonathan Corbet <corbet@xxxxxxx>
Signed-off-by: Kim Phillips <kim.phillips@xxxxxxx>
---
v2: address Mathieu's comment about clarifying the sinks on the Juno
vs. TC2 platforms.
Documentation/trace/coresight.txt | 41 +++++++++++++++++++------------
1 file changed, 25 insertions(+), 16 deletions(-)
diff --git a/Documentation/trace/coresight.txt
b/Documentation/trace/coresight.txt index 6f0120c3a4f1..134994e9fa6d
100644
--- a/Documentation/trace/coresight.txt
+++ b/Documentation/trace/coresight.txt
@@ -144,10 +144,22 @@ If everything goes well during the registration
process the new devices will show up under /sys/bus/coresight/devices,
as showns here for a TC2 platform:
root:~# ls /sys/bus/coresight/devices/
-replicator 20030000.tpiu 2201c000.ptm 2203c000.etm 2203e000.etm
-20010000.etb 20040000.funnel 2201d000.ptm 2203d000.etm
+20010000.etb 20040000.funnel 2201d000.ptm 2203d000.etm
replicator +20030000.tpiu 2201c000.ptm 2203c000.etm
2203e000.etm root:~#
+and here for a Juno platform:
+
+root@juno:~# ls /sys/bus/coresight/devices/
+20010000.etf 20120000.replicator 22040000.etm
230c0000.funnel +20030000.tpiu 20130000.funnel
220c0000.funnel 23140000.etm +20040000.funnel
20140000.etf 22140000.etm 23240000.etm
+20070000.etr 20150000.funnel 23040000.etm
23340000.etm +root@juno:~# +
+Note that on Juno users can select the ETF, ETR and TPIU as a sink
target while +on TC2, the ETB and TPIU can be selected.
+
The functions take a "struct coresight_device", which looks like this:
struct coresight_desc {
@@ -193,16 +205,16 @@ the information carried in "THIS_MODULE".
How to use the tracer modules
-----------------------------
-Before trace collection can start, a coresight sink needs to be
identify. +Before trace collection can start, a coresight sink needs to
be identified. There is no limit on the amount of sinks (nor sources)
that can be enabled at any given moment. As a generic operation, all
device pertaining to the sink class will have an "active" entry in
sysfs:
root:/sys/bus/coresight/devices# ls
-replicator 20030000.tpiu 2201c000.ptm 2203c000.etm 2203e000.etm
-20010000.etb 20040000.funnel 2201d000.ptm 2203d000.etm
+20010000.etb 20040000.funnel 2201d000.ptm 2203d000.etm
replicator +20030000.tpiu 2201c000.ptm 2203c000.etm
2203e000.etm root:/sys/bus/coresight/devices# ls 20010000.etb
-enable_sink status trigger_cntr
+enable_sink mgmt power subsystem trigger_cntr uevent
root:/sys/bus/coresight/devices# echo 1 > 20010000.etb/enable_sink
root:/sys/bus/coresight/devices# cat 20010000.etb/enable_sink
1
@@ -216,16 +228,13 @@ trigger a trace capture:
root:/sys/bus/coresight/devices# echo 1 > 2201c000.ptm/enable_source
root:/sys/bus/coresight/devices# cat 2201c000.ptm/enable_source
1
-root:/sys/bus/coresight/devices# cat 20010000.etb/status
-Depth: 0x2000
-Status: 0x1
-RAM read ptr: 0x0
-RAM wrt ptr: 0x19d3 <----- The write pointer is moving
-Trigger cnt: 0x0
-Control: 0x1
-Flush status: 0x0
-Flush ctrl: 0x2001
-root:/sys/bus/coresight/devices#
+
+Observe the write pointer moving:
+
+root:/sys/bus/coresight/devices# cat 20010000.etb/mgmt/rwp
+0x1a8
+root:/sys/bus/coresight/devices# cat 20010000.etb/mgmt/rwp
+0x19a6
Trace collection is stopped the same way:
--
2.17.0
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
