On 24/08/17 14:07, Mauro Carvalho Chehab wrote: > From: "mchehab@xxxxxxxxxxxxxxxx" <mchehab@xxxxxxxxxxxxxxxx> > > When we added support for omap3, back in 2010, we added a new > type of V4L2 devices that aren't fully controlled via the V4L2 > device node. Yet, we never made it clear, at the V4L2 spec, > about the differences between both types. > > Let's document them with the current implementation. > > Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx> > Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx> > --- > Documentation/media/uapi/v4l/open.rst | 47 +++++++++++++++++++++++++++++++++++ > 1 file changed, 47 insertions(+) > > diff --git a/Documentation/media/uapi/v4l/open.rst b/Documentation/media/uapi/v4l/open.rst > index afd116edb40d..cf522d9bb53c 100644 > --- a/Documentation/media/uapi/v4l/open.rst > +++ b/Documentation/media/uapi/v4l/open.rst > @@ -6,6 +6,53 @@ > Opening and Closing Devices > *************************** > > +Types of V4L2 device control I don't like calling this 'device control'. Mostly because the word 'device' can mean almost anything and is very overused. How about "hardware control"? > +============================ > + > +V4L2 devices are usually complex: they're implemented via a main driver and they're -> they are (contractions like "they're" aren't normally used in formal texts) > +often several additional drivers. The main driver always exposes one or > +more **V4L2 device** devnodes (see :ref:`v4l2_device_naming`). The other > +devices are called **V4L2 sub-devices**. They are usually controlled via a > +serial bus (I2C or SMBus). > + > +When V4L2 started, there was only one type of device control. The entire started -> was originally designed > +device was controlled via the **V4L2 device nodes**. We refer to this > +kind of control as **V4L2 device-centric** (or, simply, **device-centric**). For the same reason as mentioned above I prefer "device node-centric" or "devnode-centric". "device" is too ambiguous. > + > +Since the end of 2010, a new type of V4L2 device control was added in order > +to support complex devices that are common on embedded systems. Those on -> for > +devices are controlled mainly via the media controller and sub-devices. > +So, they're called: **media controller centric** (or, simply, > +"**mc-centric**"). > + > +On **device-centric** control, the device and their corresponding hardware On -> For > +pipelines are controlled via the **V4L2 device** node. They may optionally > +expose the hardware pipelines via the > +:ref:`media controller API <media_controller>`. > + > +On a **mc-centric**, before using the V4L2 device, it is required to "For **mc-centric** control" > +set the hardware pipelines via the > +:ref:`media controller API <media_controller>`. On those devices, the On -> For > +sub-devices' configuration can be controlled via the can be -> is > +:ref:`sub-device API <subdev>`, with creates one device node per sub device. > + > +In summary, on **mc-centric** devices: on -> for > + > +- The **V4L2 device** node is mainly responsible for controlling the > + streaming features; I think "mainly" can be dropped. > +- The **media controller device** is responsible to setup the pipelines > + and image settings (like size and format); > +- The **V4L2 sub-devices** are responsible for sub-device > + specific settings. > + > +.. note:: > + > + It is forbidden for **device-centric** devices to expose V4L2 > + sub-devices via :ref:`sub-device API <subdev>`, although this > + might change in the future. We discussed this on irc yesterday, so this has to be tweaked a bit. > + > + > +.. _v4l2_device_naming: > > Device Naming > ============= > Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
