On Thu, 2017-06-08 at 05:37 -0700, Guenter Roeck wrote: > On 06/08/2017 12:53 AM, Andrew Jeffery wrote: > > On Wed, 2017-06-07 at 08:55 -0700, Guenter Roeck wrote: > > > On Tue, Jun 06, 2017 at 04:32:30PM +0930, Andrew Jeffery wrote: > > > > Add a basic driver for the MAX31785, focusing on the fan control > > > > features but ignoring the temperature and voltage monitoring > > > > features of the device. > > > > > > > > This driver supports all fan control modes and tachometer / PWM > > > > readback where applicable. > > > > > > > > > > Signed-off-by: Timothy Pearson <tpearson@xxxxxxxxxxxxxxxxxxxxx> > > > > > > Signed-off-by: Andrew Jeffery <andrew@xxxxxxxx> > > > > > > > > --- > > > > Hello, > > > > > > > > This is a rework of Timothy Pearson's original patch: > > > > > > > > https://www.mail-archive.com/linux-hwmon@xxxxxxxxxxxxxxx/msg00868.html > > > > > > > > I've labelled it as v3 to differentiate from Timothy's postings. > > > > > > > > The original thread had some discussion about the MAX31785 being a PMBus device > > > > and that it should thus be a PMBus driver. The implementation still makes use > > > > > > After thinking about it, that is what it should be. If I accept it as non-PMBus > > > driver, it will be all but impossible to convert it to a PMBus driver later on, > > > and that just doesn't make any sense. > > > > Hopefully not being too ignorant here, but can you expand on why it > > would be all but impossible to convert? > > > > I've got a lot of noise recently just for converting a driver from the old to the > new API (which changes the attribute location). Changing the driver from non-PMBus > to PMBus would very quite likely change some attributes as well. Okay. > > Besides that, I think it is a bad idea to bypass an infrastructure just because > it may require a few tweaks. That generates a bad precedent, and people _would_ > use that to argue that the next PMBus chip driver should not use the infrastructure > either. I understand not wanting to set a precedent. Thanks for your response. Andrew > > Guenter > > > > > > > With no one interested in writing that driver, I'll try to give it some more > > > priority myself. I do have an evaluation board somewhere, which should help. > > > > > > Note that the second fan reading should be implemented as just that, not with > > > a non-standard attribute. > > > > Agreed. > > > > Andrew > > > >
Attachment:
signature.asc
Description: This is a digitally signed message part