On Tue, Jun 06, 2017 at 04:32:30PM +0930, Andrew Jeffery wrote: > Add a basic driver for the MAX31785, focusing on the fan control > features but ignoring the temperature and voltage monitoring > features of the device. > > This driver supports all fan control modes and tachometer / PWM > readback where applicable. > > Signed-off-by: Timothy Pearson <tpearson@xxxxxxxxxxxxxxxxxxxxx> > Signed-off-by: Andrew Jeffery <andrew@xxxxxxxx> > --- > Hello, > > This is a rework of Timothy Pearson's original patch: > > https://www.mail-archive.com/linux-hwmon@xxxxxxxxxxxxxxx/msg00868.html > > I've labelled it as v3 to differentiate from Timothy's postings. > > The original thread had some discussion about the MAX31785 being a PMBus device > and that it should thus be a PMBus driver. The implementation still makes use After thinking about it, that is what it should be. If I accept it as non-PMBus driver, it will be all but impossible to convert it to a PMBus driver later on, and that just doesn't make any sense. With no one interested in writing that driver, I'll try to give it some more priority myself. I do have an evaluation board somewhere, which should help. Note that the second fan reading should be implemented as just that, not with a non-standard attribute. Guenter -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html