Hi, On Wednesday 29 March 2017 05:40 PM, Kishon Vijay Abraham I wrote: > Hi Niklas, > > On Wednesday 29 March 2017 05:12 PM, Niklas Cassel wrote: >> On 03/27/2017 11:44 AM, Kishon Vijay Abraham I wrote: >>> Hi Bjorn, >>> >>> Please find the pull request for PCI endpoint support below. I've >>> also included all the history here. >>> >>> Changes from v4: >>> *) add #syscon-cells property and used of_parse_phandle_with_args >>> to perform a configuration in syscon module (as suggested by >>> Rob Herring) >>> *) Remove unnecessary white space. >>> >>> Changes from v3: >>> *) fixed a typo and adapted to https://lkml.org/lkml/2017/3/13/562. >>> >>> Changes from v2: >>> *) changed the configfs structure as suggested by Christoph Hellwig. With >>> this change the framework creates configfs entry for EP function driver >>> and EP controller. Previously these entries have to be created by the >>> the user. (Haven't changed the epc core or epf core except for invoking >>> configfs APIs to create entries for EP function driver and EP controller. >>> That's mostly because the EP function device can still be created by >>> directly invoking the epf core API without using configfs). >>> *) Now the user has to use configfs entry 'start' to start the link. >>> This was previously done by the function driver. However in the case of >>> multi function EP, the function driver shouldn't start the link. >>> >>> Changes from v1: >>> *) The preparation patches for adding EP support is removed and is sent >>> separately >>> *) Added device ID for DRA74x/DRA72x and used it instead of >>> using "PCI_ANY_ID" >>> *) Added userguide for PCI endpoint test function >>> >>> Major Improvements from RFC: >>> *) support multi-function devices (hw supported not virtual) >>> *) Access host side buffers >>> *) Raise MSI interrupts >>> *) Add user space program to use the host side PCI driver >>> *) Adapt all other users of designware to use the new design (only >>> compile tested. Since I have only dra7xx boards, the new design >>> has only been tested in dra7xx. I'd require the help of others >>> to test the platforms they have access to). >>> >>> This series has been developed over 4.11-rc1 + [1] >>> [1] -> https://lkml.org/lkml/2017/3/13/562 >>> >>> Let me know if this has to be re-based to some of your branch. >>> >>> Thanks >>> Kishon >>> >>> The following changes since commit 623e87fec8ab7867fb51b3079196bd10718a60ce: >>> >>> PCI: dwc: dra7xx: Push request_irq call to the bottom of probe (2017-03-22 20:35:30 +0530) >>> >>> are available in the git repository at: >>> >>> git://git.kernel.org/pub/scm/linux/kernel/git/kishon/pci-endpoint.git tags/pci-endpoint-for-4.12 >>> >>> for you to fetch changes up to e98bf80074be4654faae42fe0f5a622a776b6fdd: >>> >>> ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP (2017-03-27 15:08:22 +0530) >>> >>> ---------------------------------------------------------------- >> >> FWIW: >> I've tested Kishon's tag pci-endpoint-for-4.12 >> and PCIe on artpec6 SoC is still working fine. > > Thanks for testing it. >> >> I also included the DRA7xx PCIe driver in my >> kernel so that pcie-designware-ep.c gets built. >> >> My only worry is that the code in pcie-designware-ep.c >> is not compile tested if DRA7xx is not selected >> (as it is the only driver using PCIE_DW_EP at >> the moment). > > yeah, we should plan to include COMPILE_TEST in all pci drivers but I guess > there is some problem with non-ARM builds [1]. As Bjorn mentioned in the > thread, we could add #ifdef ARM and then include COMPILE_TEST. I think I misunderstood your concern. yeah, there is no direct way to compile pcie-designware-ep.c without selecting DRA7xx. Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
