Hi Niklas, On Wednesday 29 March 2017 05:12 PM, Niklas Cassel wrote: > On 03/27/2017 11:44 AM, Kishon Vijay Abraham I wrote: >> Hi Bjorn, >> >> Please find the pull request for PCI endpoint support below. I've >> also included all the history here. >> >> Changes from v4: >> *) add #syscon-cells property and used of_parse_phandle_with_args >> to perform a configuration in syscon module (as suggested by >> Rob Herring) >> *) Remove unnecessary white space. >> >> Changes from v3: >> *) fixed a typo and adapted to https://lkml.org/lkml/2017/3/13/562. >> >> Changes from v2: >> *) changed the configfs structure as suggested by Christoph Hellwig. With >> this change the framework creates configfs entry for EP function driver >> and EP controller. Previously these entries have to be created by the >> the user. (Haven't changed the epc core or epf core except for invoking >> configfs APIs to create entries for EP function driver and EP controller. >> That's mostly because the EP function device can still be created by >> directly invoking the epf core API without using configfs). >> *) Now the user has to use configfs entry 'start' to start the link. >> This was previously done by the function driver. However in the case of >> multi function EP, the function driver shouldn't start the link. >> >> Changes from v1: >> *) The preparation patches for adding EP support is removed and is sent >> separately >> *) Added device ID for DRA74x/DRA72x and used it instead of >> using "PCI_ANY_ID" >> *) Added userguide for PCI endpoint test function >> >> Major Improvements from RFC: >> *) support multi-function devices (hw supported not virtual) >> *) Access host side buffers >> *) Raise MSI interrupts >> *) Add user space program to use the host side PCI driver >> *) Adapt all other users of designware to use the new design (only >> compile tested. Since I have only dra7xx boards, the new design >> has only been tested in dra7xx. I'd require the help of others >> to test the platforms they have access to). >> >> This series has been developed over 4.11-rc1 + [1] >> [1] -> https://lkml.org/lkml/2017/3/13/562 >> >> Let me know if this has to be re-based to some of your branch. >> >> Thanks >> Kishon >> >> The following changes since commit 623e87fec8ab7867fb51b3079196bd10718a60ce: >> >> PCI: dwc: dra7xx: Push request_irq call to the bottom of probe (2017-03-22 20:35:30 +0530) >> >> are available in the git repository at: >> >> git://git.kernel.org/pub/scm/linux/kernel/git/kishon/pci-endpoint.git tags/pci-endpoint-for-4.12 >> >> for you to fetch changes up to e98bf80074be4654faae42fe0f5a622a776b6fdd: >> >> ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP (2017-03-27 15:08:22 +0530) >> >> ---------------------------------------------------------------- > > FWIW: > I've tested Kishon's tag pci-endpoint-for-4.12 > and PCIe on artpec6 SoC is still working fine. Thanks for testing it. > > I also included the DRA7xx PCIe driver in my > kernel so that pcie-designware-ep.c gets built. > > My only worry is that the code in pcie-designware-ep.c > is not compile tested if DRA7xx is not selected > (as it is the only driver using PCIE_DW_EP at > the moment). yeah, we should plan to include COMPILE_TEST in all pci drivers but I guess there is some problem with non-ARM builds [1]. As Bjorn mentioned in the thread, we could add #ifdef ARM and then include COMPILE_TEST. Thanks Kishon [1] -> http://www.spinics.net/lists/linux-pci/msg58134.html Thanks Kishon > -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
