[PATCH] ixgbe: Remove out-of-tree references

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The module parameters FdirMode, FdirPballoc, AtrSampleRate, or Node are
not available in the in-kernel driver, only in Intel's out-of-tree
SourceForge driver. Remove these from the kernel documentation.

Remove reference to Intel affinity script. Move max_vfs to tidy up.

Signed-off-by: Jamie Bainbridge <jamie.bainbridge@xxxxxxxxx>
---
 Documentation/networking/ixgbe.txt | 62 +++++++-------------------------------
 1 file changed, 11 insertions(+), 51 deletions(-)

diff --git a/Documentation/networking/ixgbe.txt b/Documentation/networking/ixgbe.txt
index 6f0cb57b59c6b3713b3428c0dfadbbec46972ab5..77b5b4f75fe751e0f52b8fa26f2beb71436bfdc9 100644
--- a/Documentation/networking/ixgbe.txt
+++ b/Documentation/networking/ixgbe.txt
@@ -128,9 +128,6 @@ for flexible flow classification and load balancing.
 
 Flow director is enabled only if the kernel is multiple TX queue capable.
 
-An included script (set_irq_affinity.sh) automates setting the IRQ to CPU
-affinity.
-
 You can verify that the driver is using Flow Director by looking at the counter
 in ethtool: fdir_miss and fdir_match.
 
@@ -158,54 +155,6 @@ NOTE: Receive Packet Steering (RPS) and Receive Flow Steering (RFS) are not
 compatible with Flow Director. IF Flow Director is enabled, these will be
 disabled.
 
-The following three parameters impact Flow Director.
-
-FdirMode
---------
-Valid Range: 0-2 (0=off, 1=ATR, 2=Perfect filter mode)
-Default Value: 1
-
-  Flow Director filtering modes.
-
-FdirPballoc
------------
-Valid Range: 0-2 (0=64k, 1=128k, 2=256k)
-Default Value: 0
-
-  Flow Director allocated packet buffer size.
-
-AtrSampleRate
---------------
-Valid Range: 1-100
-Default Value: 20
-
-  Software ATR Tx packet sample rate. For example, when set to 20, every 20th
-  packet, looks to see if the packet will create a new flow.
-
-Node
-----
-Valid Range:   0-n
-Default Value: 1 (off)
-
-  0 - n: where n is the number of NUMA nodes (i.e. 0 - 3) currently online in
-  your system
-  1: turns this option off
-
-  The Node parameter will allow you to pick which NUMA node you want to have
-  the adapter allocate memory on.
-
-max_vfs
--------
-Valid Range:   1-63
-Default Value: 0
-
-  If the value is greater than 0 it will also force the VMDq parameter to be 1
-  or more.
-
-  This parameter adds support for SR-IOV.  It causes the driver to spawn up to
-  max_vfs worth of virtual function.
-
-
 Additional Configurations
 =========================
 
@@ -297,6 +246,17 @@ Additional Configurations
 
   Where n=the VF that attempted to do the spoofing.
 
+  max_vfs
+  -------
+  Valid Range:   1-63
+  Default Value: 0
+
+  If the value is greater than 0 it will also force the VMDq parameter to be 1
+  or more.
+
+  This parameter adds support for SR-IOV.  It causes the driver to spawn up to
+  max_vfs worth of virtual function.
+
 
 Performance Tuning
 ==================
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux