On Tue, Feb 23, 2016 at 11:00:21AM +0800, Xinliang Liu wrote: > Add ADE display controller binding doc. > Add DesignWare DSI Host Controller v1.20a binding doc. > > v5: > - Remove endpoint unit address of dsi output port. > - Add "hisilicon,noc-syscon" property for ADE NOC QoS syscon. > - Add "resets" property for ADE reset. > v4: > - Describe more specific of clocks and ports. > - Fix indentation. > v3: > - Make ade as the drm master node. > - Use assigned-clocks to set clock rate. > - Use ports to connect display relavant nodes. > v2: > - Move dt binding docs to bindings/display/hisilicon directory. > > Signed-off-by: Xinwei Kong <kong.kongxinwei@xxxxxxxxxxxxx> > Signed-off-by: Xinliang Liu <xinliang.liu@xxxxxxxxxx> > --- > .../bindings/display/hisilicon/dw-dsi.txt | 72 ++++++++++++++++++++++ > .../bindings/display/hisilicon/hisi-ade.txt | 64 +++++++++++++++++++ > 2 files changed, 136 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt > create mode 100644 Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt > > diff --git a/Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt b/Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt > new file mode 100644 > index 000000000000..0d234b5e19af > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt > @@ -0,0 +1,72 @@ > +Device-Tree bindings for DesignWare DSI Host Controller v1.20a driver > + > +A DSI Host Controller resides in the middle of display controller and external > +HDMI converter or panel. > + > +Required properties: > +- compatible: value should be "hisilicon,hi6220-dsi". > +- reg: physical base address and length of dsi controller's registers. > +- clocks: the clocks needed. > +- clock-names: the name of the clocks. You _must_ specify the precise set of clock names you expect here. Per the example, you seem to expect "pclk_dsi". Is that the name given in the DSI controller manual? Or is it just "pclk"? It's already specific to the DSI controller... > diff --git a/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt > new file mode 100644 > index 000000000000..c1844b3ff878 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt > @@ -0,0 +1,64 @@ > +Device-Tree bindings for hisilicon ADE display controller driver > + > +ADE (Advanced Display Engine) is the display controller which grab image > +data from memory, do composition, do post image processing, generate RGB > +timing stream and transfer to DSI. > + > +Required properties: > +- compatible: value should be "hisilicon,hi6220-ade". > +- reg: physical base address and length of the ADE controller's registers. > + Value should be "<0x0 0xf4100000 0x0 0x7800>". Get rid of the "Value should be ... " part. It is nonsensical to describe this in the binding. Just describe what this is with relation to _this_ IP block. > +- reg-names: name of physical base. Value should be "ade_base". That obviously doesn't apply to *-names propertiesm which must all be specified in the binding (they're local to the device rather than remote). > +- hisilicon,noc-syscon: ADE NOC QoS syscon. Value should be "<&medianoc_ade>" > +- resets: The ADE reset controller node. Value should be "<&media_ctrl > + MEDIA_ADE>". Likewise. > +- interrupt: the ldi vblank interrupt number used. > +- clocks: the clocks needed. Three clocks are used in ADE driver: > + ADE core clock, value should be "<&media_ctrl HI6220_ADE_CORE>"; > + ADE pixel clok, value should be "<&media_ctrl HI6220_ADE_PIX_SRC>"; > + media NOC QoS clock, value should be "<&media_ctrl HI6220_CODEC_JPEG>". > +- clock-names: the name of the clocks. Values should be "clk_ade_core", > + "clk_codec_jpeg" and "clk_ade_pix". Likewise, don't specify the value. Jsut define clocks in terms of clock-names, e.g. - clocks: a list of phandle + clock-specifier pairs, one for each entry in clock-names. - clock-names: should contain: * "clk_ade_core" for the ADE ciore clock * ... * ... > +- assigned-clocks: clocks to be assigned rate. > +- assigned-clock-rates: clock rates which are assigned to assigned-clocks. > + The rate of <&media_ctrl HI6220_ADE_CORE> could be "360000000" or > + "180000000"; > + The rate of <&media_ctrl HI6220_CODEC_JPEG> could be less than "1440000000". Is this strictly necessary? Why can the druiver not configure this? Does this have to match some pre-existing boot-time configuration? Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
