Add ADE display controller binding doc.
Add DesignWare DSI Host Controller v1.20a binding doc.
v5:
- Remove endpoint unit address of dsi output port.
- Add "hisilicon,noc-syscon" property for ADE NOC QoS syscon.
- Add "resets" property for ADE reset.
v4:
- Describe more specific of clocks and ports.
- Fix indentation.
v3:
- Make ade as the drm master node.
- Use assigned-clocks to set clock rate.
- Use ports to connect display relavant nodes.
v2:
- Move dt binding docs to bindings/display/hisilicon directory.
Signed-off-by: Xinwei Kong <kong.kongxinwei@xxxxxxxxxxxxx>
Signed-off-by: Xinliang Liu <xinliang.liu@xxxxxxxxxx>
---
.../bindings/display/hisilicon/dw-dsi.txt | 72 ++++++++++++++++++++++
.../bindings/display/hisilicon/hisi-ade.txt | 64 +++++++++++++++++++
2 files changed, 136 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt
create mode 100644 Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt
diff --git a/Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt b/Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt
new file mode 100644
index 000000000000..0d234b5e19af
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt
@@ -0,0 +1,72 @@
+Device-Tree bindings for DesignWare DSI Host Controller v1.20a driver
+
+A DSI Host Controller resides in the middle of display controller and external
+HDMI converter or panel.
+
+Required properties:
+- compatible: value should be "hisilicon,hi6220-dsi".
+- reg: physical base address and length of dsi controller's registers.
+- clocks: the clocks needed.
+- clock-names: the name of the clocks.
+- ports: contains DSI controller input and output sub port.
+ The input port connects to ADE output port with the reg value "0".
+ The output port with the reg value "1", it could connect to panel or
+ any other bridge endpoints.
+ See Documentation/devicetree/bindings/graph.txt for more device graph info.
+
+A example of HiKey board hi6220 SoC and board specific DT entry:
+Example:
+
+SoC specific:
+ dsi: dsi@f4107800 {
+ compatible = "hisilicon,hi6220-dsi";
+ reg = <0x0 0xf4107800 0x0 0x100>;
+ clocks = <&media_ctrl HI6220_DSI_PCLK>;
+ clock-names = "pclk_dsi";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 0 for input port */
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint = <&ade_out>;
+ };
+ };
+ };
+ };
+
+
+Board specific:
+ &dsi {
+ status = "ok";
+
+ ports {
+ /* 1 for output port */
+ port@1 {
+ reg = <1>;
+
+ dsi_out0: endpoint@0 {
+ remote-endpoint = <&adv7533_in>;
+ };
+ };
+ };
+ };
+
+ &i2c2 {
+ ...
+
+ adv7533: adv7533@39 {
+ ...
+
+ port {
+ adv7533_in: endpoint {
+ remote-endpoint = <&dsi_out0>;
+ };
+ };
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt
new file mode 100644
index 000000000000..c1844b3ff878
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt
@@ -0,0 +1,64 @@
+Device-Tree bindings for hisilicon ADE display controller driver
+
+ADE (Advanced Display Engine) is the display controller which grab image
+data from memory, do composition, do post image processing, generate RGB
+timing stream and transfer to DSI.
+
+Required properties:
+- compatible: value should be "hisilicon,hi6220-ade".
+- reg: physical base address and length of the ADE controller's registers.
+ Value should be "<0x0 0xf4100000 0x0 0x7800>".
+- reg-names: name of physical base. Value should be "ade_base".
+- hisilicon,noc-syscon: ADE NOC QoS syscon. Value should be "<&medianoc_ade>"
+- resets: The ADE reset controller node. Value should be "<&media_ctrl
+ MEDIA_ADE>".
+- interrupt: the ldi vblank interrupt number used.
+- clocks: the clocks needed. Three clocks are used in ADE driver:
+ ADE core clock, value should be "<&media_ctrl HI6220_ADE_CORE>";
+ ADE pixel clok, value should be "<&media_ctrl HI6220_ADE_PIX_SRC>";
+ media NOC QoS clock, value should be "<&media_ctrl HI6220_CODEC_JPEG>".
+- clock-names: the name of the clocks. Values should be "clk_ade_core",
+ "clk_codec_jpeg" and "clk_ade_pix".
+- assigned-clocks: clocks to be assigned rate.
+- assigned-clock-rates: clock rates which are assigned to assigned-clocks.
+ The rate of <&media_ctrl HI6220_ADE_CORE> could be "360000000" or
+ "180000000";
+ The rate of <&media_ctrl HI6220_CODEC_JPEG> could be less than "1440000000".
+- port: the output port. This contains one endpoint subnode, with its
+ remote-endpoint set to the phandle of the connected DSI input endpoint.
+ See Documentation/devicetree/bindings/graph.txt for more device graph info.
+
+Optional properties:
+- dma-coherent: Present if dma operations are coherent.
+
+
+A example of HiKey board hi6220 SoC specific DT entry:
+Example:
+
+ ade: ade@f4100000 {
+ compatible = "hisilicon,hi6220-ade";
+ reg = <0x0 0xf4100000 0x0 0x7800>;
+ reg-names = "ade_base";
+ hisilicon,noc-syscon = <&medianoc_ade>;
+ resets = <&media_ctrl MEDIA_ADE>;
+ interrupts = <0 115 4>; /* ldi interrupt */
+
+ clocks = <&media_ctrl HI6220_ADE_CORE>,
+ <&media_ctrl HI6220_CODEC_JPEG>,
+ <&media_ctrl HI6220_ADE_PIX_SRC>;
+ /*clock name*/
+ clock-names = "clk_ade_core",
+ "clk_codec_jpeg",
+ "clk_ade_pix";
+
+ assigned-clocks = <&media_ctrl HI6220_ADE_CORE>,
+ <&media_ctrl HI6220_CODEC_JPEG>;
+ assigned-clock-rates = <360000000>, <288000000>;
+ dma-coherent;
+
+ port {
+ ade_out: endpoint {
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
