Hi Andy,
On 03/04/2015 02:44 PM, Andy Shevchenko wrote:
On Wed, 2015-03-04 at 14:31 -0600, tthayer@xxxxxxxxxxxxxxxxxxxxx wrote:
From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
The Altera Arria10 SoC requires 32 bit accesses to peripherals. The
DesignWare SPI peripheral registers are on 32bit boundaries so this
patch is minimal. Function pointers are used to select 32bit access
or 16bit accesses.
So, what is exactly the issue when we read only half of the register?
Bus lock, or what?
The read actually works on our chip but I changed both read and write to
be consistent. For Arria10, on a 16 bit write the data isn't written
into the DesignWare register.
In reply to your other email, yes it does support the DW_apb_ssi but the
Arria10 architecture requires 32 bit access (actually as you point out,
32 bit writes). We're using the original driver on our older chips but
Arria10 requires upstream changes.
Thor Thayer (2):
dt-binding: spi: spi-dw: Select 16b or 32b access for Designware SPI
spi: dw-spi: Pointers select 16b vs. 32b DesignWare access
Documentation/devicetree/bindings/spi/spi-dw.txt | 1 +
drivers/spi/spi-dw-mmio.c | 7 +++-
drivers/spi/spi-dw.c | 38 +++++++++++++---------
drivers/spi/spi-dw.h | 10 +++---
4 files changed, 35 insertions(+), 21 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
