Re: [RFC/PATCH 0/2] spi: spi-dw: Select 16b or 32b register access

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2015-03-04 at 14:31 -0600, tthayer@xxxxxxxxxxxxxxxxxxxxx wrote:
> From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
> 
> The Altera Arria10 SoC requires 32 bit accesses to peripherals. The
> DesignWare SPI peripheral registers are on 32bit boundaries so this
> patch is minimal. Function pointers are used to select 32bit access
> or 16bit accesses.


So, what is exactly the issue when we read only half of the register?
Bus lock, or what?

> 
> Thor Thayer (2):
>   dt-binding: spi: spi-dw: Select 16b or 32b access for Designware SPI
>   spi: dw-spi: Pointers select 16b vs. 32b DesignWare access
> 
>  Documentation/devicetree/bindings/spi/spi-dw.txt |    1 +
>  drivers/spi/spi-dw-mmio.c                        |    7 +++-
>  drivers/spi/spi-dw.c                             |   38 +++++++++++++---------
>  drivers/spi/spi-dw.h                             |   10 +++---
>  4 files changed, 35 insertions(+), 21 deletions(-)
> 


-- 
Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
Intel Finland Oy

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux