On Wed, Nov 12, 2014 at 12:14:23AM +0000, tthayer@xxxxxxxxxxxxxxxxxxxxx wrote: > From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx> > > Adding the device tree entries and bindings needed to support > the Altera L2 cache and On-Chip RAM EDAC. This patch relies upon > an earlier patch to declare and setup On-chip RAM properly. > http://www.spinics.net/lists/devicetree/msg51117.html > > Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx> > --- > v2: Remove OCRAM declaration and reference prior patch. > > v3-5: No Change > --- > .../bindings/arm/altera/socfpga-l2-edac.txt | 15 +++++++++++++++ > .../bindings/arm/altera/socfpga-ocram-edac.txt | 16 ++++++++++++++++ > arch/arm/boot/dts/socfpga.dtsi | 15 ++++++++++++++- > 3 files changed, 45 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-l2-edac.txt > create mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-ocram-edac.txt > > diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-l2-edac.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-l2-edac.txt > new file mode 100644 > index 0000000..35b19e3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-l2-edac.txt > @@ -0,0 +1,15 @@ > +Altera SoCFPGA L2 cache Error Detection and Correction [EDAC] > + > +Required Properties: > +- compatible : Should be "altr,l2-edac" > +- reg : Address and size for ECC error interrupt clear registers. > +- interrupts : Should be single bit error interrupt, then double bit error > + interrupt. Note the rising edge type. > + > +Example: > + > + l2edac@ffd08140 { > + compatible = "altr,l2-edac"; > + reg = <0xffd08140 0x4>; > + interrupts = <0 36 1>, <0 37 1>; > + }; Judging by the size of the reg entry, this is part of a larger block (the same one the OCRAM EDAC lives in). Why isn't that larger block described? EDAC is a Linux subsystem name, but typically not the HW block name. What HW block does this live in? > diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-ocram-edac.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-ocram-edac.txt > new file mode 100644 > index 0000000..31ab205 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-ocram-edac.txt > @@ -0,0 +1,16 @@ > +Altera SoCFPGA On-Chip RAM Error Detection and Correction [EDAC] > + > +OCRAM ECC Required Properties: > +- compatible : Should be "altr,ocram-edac" > +- reg : Address and size for ECC error interrupt clear registers. > +- iram : phandle to On-Chip RAM definition. > +- interrupts : Should be single bit error interrupt, then double bit error > + interrupt. Note the rising edge type. > + > +Example: > + ocramedac@ffd08144 { > + compatible = "altr,ocram-edac"; > + reg = <0xffd08144 0x4>; > + iram = <&ocram>; > + interrupts = <0 178 1>, <0 179 1>; > + }; > diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi > index 6af96ed..32c63a3 100644 > --- a/arch/arm/boot/dts/socfpga.dtsi > +++ b/arch/arm/boot/dts/socfpga.dtsi > @@ -618,8 +618,21 @@ > interrupts = <0 39 4>; > }; > > + l2edac@ffd08140 { > + compatible = "altr,l2-edac"; > + reg = <0xffd08140 0x4>; > + interrupts = <0 36 1>, <0 37 1>; > + }; > + > + ocramedac@ffd08144 { > + compatible = "altr,ocram-edac"; > + reg = <0xffd08144 0x4>; > + iram = <&ocram>; > + interrupts = <0 178 1>, <0 179 1>; > + }; > + > L2: l2-cache@fffef000 { > - compatible = "arm,pl310-cache"; > + compatible = "arm,pl310-cache", "syscon"; NAK. Why are you marking the PL310 as a syscon device? It is most definitely _NOT_ a shared set of registers lumped together. Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html