Hi Linus,
On Tue, 2014-07-08 at 11:34AM +0200, Linus Walleij wrote:
> On Mon, Jul 7, 2014 at 6:08 PM, Sören Brinkmann
> <soren.brinkmann@xxxxxxxxxx> wrote:
>
> >> So: what is the usecase for these GPIOs?
> >
> > Yea, in this case it was a button. I have to look at these drivers. It's
> > very likely that they cover what I want. But this case is trivial. I
> > really don't do anything but enabling the IRQ by writing to the edge
> > attribute and press the push-button connected to that GPIO line.
>
> In case of a system using device tree it is very trivial to add a gpio
> key binding. After compiling in the gpio keys driver this small
> snipper type is all that is really needed in most cases:
>
> /* User key mapped in as "escape" */
> gpio-keys {
> compatible = "gpio-keys";
> user-button {
> label = "user_button";
> gpios = <&gpio0 3 0x1>;
> linux,code = <1>; /* KEY_ESC */
> gpio-key,wakeup;
> };
> };
Thanks for the example. I think for my cases these drivers are exactly
the right thing.
>
>
> > But as a general note: I think we have quite some customers trying to do
> > GPIO in userspace.
>
> For what? I mean the use cases. Usually it is a bad idea, and
> as shown above, just using the right existing device driver with
> device tree is much easier, also for an end user, given they know
> how to alter DTs and compile in kernel modules.
>
> > With Zynq's FPGA portion, a lot of things come down
> > to make signals accessible in Linux and a lot of people do not want or
> > need a full blown kernel driver and use GPIO. The request for 'how to
> > handle GPIO IRQs in userspace' is pretty common. Often this gets passed
> > on to UIO though.
>
> The short answer is don't handle GPIO IRQs in userspace.
>
> Userspace drivers is generally a bad idea and should not be written.
> The kernel is intended to handle hardware.
>
> The above is doubly true for anything involving IRQs. Just think
> of what IRQs are. They are one of the reasons why we have a
> kernel and not just write all software on a system from scratch
> ourselves.
I fully agree and you don't have to convince me. But to a lot of our
customers that are used to use FPGAs, SOCs and Linux are pretty new. You
see a lot of scary stuff. Accessing /dev/mem seems to be a lot of
people's big hammer solution for everything. Then I always perceive it
as great progress if things like the sysfs interface are used instead.
Thanks,
Sören
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
