Rework the AXP20X_ macros to support the several chip families, so that
each family can define it's own set of regulators, and regulator matches.
Pass a match table to the axp20x_regulator_parse_dt function instead of
statically using the axp20x match table.
Signed-off-by: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
---
drivers/regulator/axp20x-regulator.c | 74 +++++++++++++++++++-----------------
1 file changed, 39 insertions(+), 35 deletions(-)
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 004aadb..9716f8e 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -32,13 +32,13 @@
#define AXP20X_FREQ_DCDC_MASK 0x0f
-#define AXP20X_DESC_IO(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg, \
- _emask, _enable_val, _disable_val) \
- [AXP20X_##_id] = { \
+#define AXP_DESC_IO(_family, _id, _supply, _min, _max, _step, _vreg, _vmask, \
+ _ereg, _emask, _enable_val, _disable_val) \
+ [_family##_##_id] = { \
.name = #_id, \
.supply_name = (_supply), \
.type = REGULATOR_VOLTAGE, \
- .id = AXP20X_##_id, \
+ .id = _family##_##_id, \
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
.owner = THIS_MODULE, \
.min_uV = (_min) * 1000, \
@@ -52,13 +52,13 @@
.ops = &axp20x_ops, \
}
-#define AXP20X_DESC(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg, \
- _emask) \
- [AXP20X_##_id] = { \
+#define AXP_DESC(_family, _id, _supply, _min, _max, _step, _vreg, _vmask, \
+ _ereg, _emask) \
+ [_family##_##_id] = { \
.name = #_id, \
.supply_name = (_supply), \
.type = REGULATOR_VOLTAGE, \
- .id = AXP20X_##_id, \
+ .id = _family##_##_id, \
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
.owner = THIS_MODULE, \
.min_uV = (_min) * 1000, \
@@ -70,24 +70,25 @@
.ops = &axp20x_ops, \
}
-#define AXP20X_DESC_FIXED(_id, _supply, _volt) \
- [AXP20X_##_id] = { \
+#define AXP_DESC_FIXED(_family, _id, _supply, _volt) \
+ [_family##_##_id] = { \
.name = #_id, \
.supply_name = (_supply), \
.type = REGULATOR_VOLTAGE, \
- .id = AXP20X_##_id, \
+ .id = _family##_##_id, \
.n_voltages = 1, \
.owner = THIS_MODULE, \
.min_uV = (_volt) * 1000, \
.ops = &axp20x_ops_fixed \
}
-#define AXP20X_DESC_TABLE(_id, _supply, _table, _vreg, _vmask, _ereg, _emask) \
- [AXP20X_##_id] = { \
+#define AXP_DESC_TABLE(_family, _id, _supply, _table, _vreg, _vmask, _ereg, \
+ _emask) \
+ [_family##_##_id] = { \
.name = #_id, \
.supply_name = (_supply), \
.type = REGULATOR_VOLTAGE, \
- .id = AXP20X_##_id, \
+ .id = _family##_##_id, \
.n_voltages = ARRAY_SIZE(_table), \
.owner = THIS_MODULE, \
.vsel_reg = (_vreg), \
@@ -127,36 +128,36 @@ static struct regulator_ops axp20x_ops = {
};
static const struct regulator_desc axp20x_regulators[] = {
- AXP20X_DESC(DCDC2, "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT, 0x3f,
+ AXP_DESC(AXP20X, DCDC2, "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT, 0x3f,
AXP20X_PWR_OUT_CTRL, 0x10),
- AXP20X_DESC(DCDC3, "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT, 0x7f,
+ AXP_DESC(AXP20X, DCDC3, "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT, 0x7f,
AXP20X_PWR_OUT_CTRL, 0x02),
- AXP20X_DESC_FIXED(LDO1, "acin", 1300),
- AXP20X_DESC(LDO2, "ldo24in", 1800, 3300, 100, AXP20X_LDO24_V_OUT, 0xf0,
+ AXP_DESC_FIXED(AXP20X, LDO1, "acin", 1300),
+ AXP_DESC(AXP20X, LDO2, "ldo24in", 1800, 3300, 100, AXP20X_LDO24_V_OUT, 0xf0,
AXP20X_PWR_OUT_CTRL, 0x04),
- AXP20X_DESC(LDO3, "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT, 0x7f,
+ AXP_DESC(AXP20X, LDO3, "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT, 0x7f,
AXP20X_PWR_OUT_CTRL, 0x40),
- AXP20X_DESC_TABLE(LDO4, "ldo24in", axp20x_ldo4_data, AXP20X_LDO24_V_OUT, 0x0f,
+ AXP_DESC_TABLE(AXP20X, LDO4, "ldo24in", axp20x_ldo4_data, AXP20X_LDO24_V_OUT, 0x0f,
AXP20X_PWR_OUT_CTRL, 0x08),
- AXP20X_DESC_IO(LDO5, "ldo5in", 1800, 3300, 100, AXP20X_LDO5_V_OUT, 0xf0,
+ AXP_DESC_IO(AXP20X, LDO5, "ldo5in", 1800, 3300, 100, AXP20X_LDO5_V_OUT, 0xf0,
AXP20X_GPIO0_CTRL, 0x07, AXP20X_IO_ENABLED,
AXP20X_IO_DISABLED),
};
-#define AXP_MATCH(_name, _id) \
- [AXP20X_##_id] = { \
+#define AXP_MATCH(_family, _name, _id) \
+ [_family##_##_id] = { \
.name = #_name, \
- .driver_data = (void *) &axp20x_regulators[AXP20X_##_id], \
+ .driver_data = (void *) &axp20x_regulators[_family##_##_id], \
}
static struct of_regulator_match axp20x_matches[] = {
- AXP_MATCH(dcdc2, DCDC2),
- AXP_MATCH(dcdc3, DCDC3),
- AXP_MATCH(ldo1, LDO1),
- AXP_MATCH(ldo2, LDO2),
- AXP_MATCH(ldo3, LDO3),
- AXP_MATCH(ldo4, LDO4),
- AXP_MATCH(ldo5, LDO5),
+ AXP_MATCH(AXP20X, dcdc2, DCDC2),
+ AXP_MATCH(AXP20X, dcdc3, DCDC3),
+ AXP_MATCH(AXP20X, ldo1, LDO1),
+ AXP_MATCH(AXP20X, ldo2, LDO2),
+ AXP_MATCH(AXP20X, ldo3, LDO3),
+ AXP_MATCH(AXP20X, ldo4, LDO4),
+ AXP_MATCH(AXP20X, ldo5, LDO5),
};
static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
@@ -179,7 +180,9 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
AXP20X_FREQ_DCDC_MASK, dcdcfreq);
}
-static int axp20x_regulator_parse_dt(struct platform_device *pdev)
+static int axp20x_regulator_parse_dt(struct platform_device *pdev,
+ struct of_regulator_match *matches,
+ int nmatches)
{
struct device_node *np, *regulators;
int ret;
@@ -193,8 +196,8 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev)
if (!regulators) {
dev_warn(&pdev->dev, "regulators node not found\n");
} else {
- ret = of_regulator_match(&pdev->dev, regulators, axp20x_matches,
- ARRAY_SIZE(axp20x_matches));
+ ret = of_regulator_match(&pdev->dev, regulators, matches,
+ nmatches);
if (ret < 0) {
dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret);
return ret;
@@ -238,7 +241,8 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
int ret, i;
u32 workmode;
- ret = axp20x_regulator_parse_dt(pdev);
+ ret = axp20x_regulator_parse_dt(pdev, axp20x_matches,
+ ARRAY_SIZE(axp20x_matches));
if (ret)
return ret;
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
