On 26 March 2014 17:42, Georgi Djakov <gdjakov@xxxxxxxxxx> wrote: > Hello Chris, Ulf, > > Do you have any comments on the patches? > The arch code that will use this driver is already in mainline. The > regulators support seem to be still on its way, but this driver also works > fine with dummy regulators. Looks good to me! For the complete patchset: Acked-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> > > Thanks, > Georgi > > > > On 03/10/2014 05:37 PM, Georgi Djakov wrote: >> >> This patchset adds basic support of the Secure Digital Host Controller >> Interface compliant controller found in Qualcomm SoCs. >> >> Tested with eMMC and various micro SD cards on APQ8074 Dragonboard. >> Applies to linux-next. >> >> Changes from v10: >> - Make reg-names and interrupt-names optional (suggested by Rob Herring) >> - Use the common names (vmmc, vqmmc) for regulators (suggested by Ulf >> Hansson) >> - Use the sdhci core to take care of regulators and clock (suggested by >> Ulf >> Hansson and Bjorn Andersson) >> - Cleanup of unused variables and defines >> >> Changes from v9: >> - Make platform_execute_tuning() static (suggested by Josh Cartwright) >> - Fix buffer size in platform_execute_tuning() (suggested by Josh >> Cartwright) >> - Fix typo in patch subject (suggested by Kumar Gala) >> - Move voltage ranges from DT to the driver (suggested by Bjorn Andersson) >> - Simplify sdhci_msm_setup_vreg and irq handler (suggested by Bjorn >> Andersson) >> - Disable prw irq in sdhci_msm_remove (suggested by Bjorn Andersson) >> - Fail on peripheral clock errors (suggested by Bjorn Andersson) >> - Remove unnecessary core_memres assignment (suggested by Bjorn Andersson) >> - Fixes on freeing resources in probe() (suggested by Bjorn Andersson) >> >> Changes from v8: >> - Added controller version suffix to the DT compatible string. >> - Switched Kconfig dependency from ARCH_MSM to the new ARCH_QCOM >> multiplatform. >> - Addressed comments from Stephen Boyd on the 3rd patch (execute tunning). >> - Added signed-off-by lines of the initial driver authors. >> - Picked up tested-by. https://lkml.org/lkml/2013/11/14/85 >> - Minor changes on comments, prints and formatting. >> >> Changes from v7: >> - Added call to sdhci_get_of_property(). >> - Refactored sdhci_msm_dt_parse_vreg_info(). >> - Fixed possible ERR_PTR() dereferencing. >> - Updated DT binding documentation. >> - Removed lpm and currents from DT. >> - Removed bus-speed-mode from DT. >> - Updated and moved the sanity checks. >> - Various typo and coding style fixes. >> - Added platform_execute_tunning implementation. >> >> Changes from v6: >> - Fixed wrong pointer in sdhci_msm_pwr_irq(). >> - Added platform_execute_tuning() callback as the MSM SDHC does not >> support tuning as in SDHC 3.0 spec and will need custom implementation >> in order to support SDR104, HS200 and HS400. >> - Removed the always-on devicetree property - if the regulator is >> configured as always-on, it will not be disabled anyway. >> - Removed devm_pinctrl_get_select_default() - the default pins are >> already set from the device core. >> - Removed wrapper function sdhci_msm_set_vdd_io_vol() and enum >> vdd_io_level and now calling regulator_set_voltage() directly. >> - Converted #defines to use BIT() macro. >> - Added IS_ERR(vreg->reg) check at the beginning of sdhci_msm_vreg >> functions. >> - Do not print errors when regulators init return -EPROBE_DEFER as the >> deffered init is not an actual error. >> - Handle each power irq status bit separately in sdhci_msm_pwr_irq(). >> - Ensure that any pending power irq is acknowledged before enabling it, >> otherwise the irq handler will be fired prematurely. >> - Minor changes. >> >> Changes from v5: >> - Driver is split into multiple patches >> - Do not initialize variables that are assigned later in code >> - Remove some useless comments >> - Use shorter variable names >> - Change pr_err() to dev_err() >> - Optimized sdhci_msm_setup_vreg() >> - Some code alignment fixes >> - Improved DT values sanity check >> - Added dev_dbg print for sdhci controller version in probe() >> - Added usleep_range() after SW reset - it can take some time >> - Added SDHCI_QUIRK_SINGLE_POWER_WRITE - power handled by PMIC >> - Renamed DT property vdd-io to vddio >> >> Changes from v4: >> - Simplified sdhci_msm_vreg_disable() and sdhci_msm_set_vdd_io_vol() >> - Use devm_ioremap_resource() instead of devm_ioremap() >> - Converted IS_ERR_OR_NULL to IS_ERR >> - Disable regulators in sdhci_msm_remove() >> - Check for DT node at the beginning in sdhci_msm_probe() >> - Removed more redundant code >> - Changes in some error messages >> - Minor fixes >> >> Changes from v3: >> - Allocate memory for all required structs at once >> - Added termination entry in sdhci_msm_dt_match[] >> - Fixed a missing sdhci_pltfm_free() in probe() >> - Removed redundant of_match_ptr >> - Removed the unneeded function sdhci_msm_vreg_reset() >> >> Changes from v2: >> - Added DT bindings for clocks >> - Moved voltage regulators data to platform data >> - Removed unneeded includes >> - Removed obsolete and wrapper functions >> - Removed error checking where unnecessary >> - Removed redundant _clk suffix from clock names >> - Just return instead of goto where possible >> - Minor fixes >> >> Georgi Djakov (3): >> mmc: sdhci-msm: Qualcomm SDHCI binding documentation >> mmc: sdhci-msm: Initial support for Qualcomm chipsets >> mmc: sdhci-msm: Add platform_execute_tuning implementation >> >> .../devicetree/bindings/mmc/sdhci-msm.txt | 55 ++ >> drivers/mmc/host/Kconfig | 13 + >> drivers/mmc/host/Makefile | 1 + >> drivers/mmc/host/sdhci-msm.c | 618 >> ++++++++++++++++++++ >> 4 files changed, 687 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-msm.txt >> create mode 100644 drivers/mmc/host/sdhci-msm.c >> > -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
