This patchset adds basic support of the Secure Digital Host Controller Interface compliant controller found in Qualcomm SoCs. Tested with eMMC and various micro SD cards on APQ8074 Dragonboard. Applies to linux-next. Changes from v10: - Make reg-names and interrupt-names optional (suggested by Rob Herring) - Use the common names (vmmc, vqmmc) for regulators (suggested by Ulf Hansson) - Use the sdhci core to take care of regulators and clock (suggested by Ulf Hansson and Bjorn Andersson) - Cleanup of unused variables and defines Changes from v9: - Make platform_execute_tuning() static (suggested by Josh Cartwright) - Fix buffer size in platform_execute_tuning() (suggested by Josh Cartwright) - Fix typo in patch subject (suggested by Kumar Gala) - Move voltage ranges from DT to the driver (suggested by Bjorn Andersson) - Simplify sdhci_msm_setup_vreg and irq handler (suggested by Bjorn Andersson) - Disable prw irq in sdhci_msm_remove (suggested by Bjorn Andersson) - Fail on peripheral clock errors (suggested by Bjorn Andersson) - Remove unnecessary core_memres assignment (suggested by Bjorn Andersson) - Fixes on freeing resources in probe() (suggested by Bjorn Andersson) Changes from v8: - Added controller version suffix to the DT compatible string. - Switched Kconfig dependency from ARCH_MSM to the new ARCH_QCOM multiplatform. - Addressed comments from Stephen Boyd on the 3rd patch (execute tunning). - Added signed-off-by lines of the initial driver authors. - Picked up tested-by. https://lkml.org/lkml/2013/11/14/85 - Minor changes on comments, prints and formatting. Changes from v7: - Added call to sdhci_get_of_property(). - Refactored sdhci_msm_dt_parse_vreg_info(). - Fixed possible ERR_PTR() dereferencing. - Updated DT binding documentation. - Removed lpm and currents from DT. - Removed bus-speed-mode from DT. - Updated and moved the sanity checks. - Various typo and coding style fixes. - Added platform_execute_tunning implementation. Changes from v6: - Fixed wrong pointer in sdhci_msm_pwr_irq(). - Added platform_execute_tuning() callback as the MSM SDHC does not support tuning as in SDHC 3.0 spec and will need custom implementation in order to support SDR104, HS200 and HS400. - Removed the always-on devicetree property - if the regulator is configured as always-on, it will not be disabled anyway. - Removed devm_pinctrl_get_select_default() - the default pins are already set from the device core. - Removed wrapper function sdhci_msm_set_vdd_io_vol() and enum vdd_io_level and now calling regulator_set_voltage() directly. - Converted #defines to use BIT() macro. - Added IS_ERR(vreg->reg) check at the beginning of sdhci_msm_vreg functions. - Do not print errors when regulators init return -EPROBE_DEFER as the deffered init is not an actual error. - Handle each power irq status bit separately in sdhci_msm_pwr_irq(). - Ensure that any pending power irq is acknowledged before enabling it, otherwise the irq handler will be fired prematurely. - Minor changes. Changes from v5: - Driver is split into multiple patches - Do not initialize variables that are assigned later in code - Remove some useless comments - Use shorter variable names - Change pr_err() to dev_err() - Optimized sdhci_msm_setup_vreg() - Some code alignment fixes - Improved DT values sanity check - Added dev_dbg print for sdhci controller version in probe() - Added usleep_range() after SW reset - it can take some time - Added SDHCI_QUIRK_SINGLE_POWER_WRITE - power handled by PMIC - Renamed DT property vdd-io to vddio Changes from v4: - Simplified sdhci_msm_vreg_disable() and sdhci_msm_set_vdd_io_vol() - Use devm_ioremap_resource() instead of devm_ioremap() - Converted IS_ERR_OR_NULL to IS_ERR - Disable regulators in sdhci_msm_remove() - Check for DT node at the beginning in sdhci_msm_probe() - Removed more redundant code - Changes in some error messages - Minor fixes Changes from v3: - Allocate memory for all required structs at once - Added termination entry in sdhci_msm_dt_match[] - Fixed a missing sdhci_pltfm_free() in probe() - Removed redundant of_match_ptr - Removed the unneeded function sdhci_msm_vreg_reset() Changes from v2: - Added DT bindings for clocks - Moved voltage regulators data to platform data - Removed unneeded includes - Removed obsolete and wrapper functions - Removed error checking where unnecessary - Removed redundant _clk suffix from clock names - Just return instead of goto where possible - Minor fixes Georgi Djakov (3): mmc: sdhci-msm: Qualcomm SDHCI binding documentation mmc: sdhci-msm: Initial support for Qualcomm chipsets mmc: sdhci-msm: Add platform_execute_tuning implementation .../devicetree/bindings/mmc/sdhci-msm.txt | 55 ++ drivers/mmc/host/Kconfig | 13 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-msm.c | 618 ++++++++++++++++++++ 4 files changed, 687 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-msm.txt create mode 100644 drivers/mmc/host/sdhci-msm.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
