> We have already renamed the file name, change doc name at this patch.
>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: linux-doc@xxxxxxxxxxxxxxx
> Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/usb/ci-hdrc-imx.txt | 51
> ++++++++++++++++++++
> .../devicetree/bindings/usb/ci13xxx-imx.txt | 51 --------------
> ------
> 2 files changed, 51 insertions(+), 51 deletions(-) create mode 100644
> Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
> delete mode 100644 Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
>
> diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
> b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
> new file mode 100644
> index 0000000..881901a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
> @@ -0,0 +1,51 @@
> +* Freescale i.MX ci13xxx usb controllers
> +
> +Required properties:
> +- compatible: Should be "fsl,imx27-usb"
> +- reg: Should contain registers location and length
> +- interrupts: Should contain controller interrupt
> +
> +Recommended properies:
> +- phy_type: the type of the phy connected to the core. Should be one
> + of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
> + property the PORTSC register won't be touched
> +- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
> +
> +Optional properties:
> +- fsl,usbphy: phandler of usb phy that connects to the only one port
> +- fsl,usbmisc: phandler of non-core register device, with one argument
> + that indicate usb controller index
> +- vbus-supply: regulator for vbus
> +- disable-over-current: disable over current detect
> +- external-vbus-divider: enables off-chip resistor divider for Vbus
> +- imx6-usb-charger-detection: enable imx6 usb charger detect function,
> +only set it when the user wants SoC usb charger detection capabilities.
> +If the user wants to use charger IC's usb charger detection
> +capabilities, please do not set it.
> +- fsl,anatop: phandle for anatop module, anatop module is only existed
> +at imx6 SoC series
> +- pinctrl-names: for names of hsic pin group
> +- pinctrl-0: hsic "idle" pin group
> +- pinctrl-1: hsic "active" pin group
> +- osc-clkgate-delay: the delay between powering up the xtal 24MHz clock
> + and release the clock to the digital logic inside the analog block,
> + 0 <= osc-clkgate-delay <= 7.
> +- maximum-speed: limit the maximum connection speed to "full-speed".
> +
> +Examples:
> +usb@02184000 { /* USB OTG */
> + compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
> + reg = <0x02184000 0x200>;
> + interrupts = <0 43 0x04>;
> + fsl,usbphy = <&usbphy1>;
> + fsl,usbmisc = <&usbmisc 0>;
> + disable-over-current;
> + external-vbus-divider;
> + imx6-usb-charger-detection;
> + fsl,anatop = <&anatop>;
> + pinctrl-names = "idle", "active";
> + pinctrl-0 = <&pinctrl_usbh2_1>;
> + pinctrl-1 = <&pinctrl_usbh2_2>;
> + osc-clkgate-delay = <0x3>;
> + maximum-speed = "full-speed";
> +};
> diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> deleted file mode 100644
> index 881901a..0000000
> --- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
> +++ /dev/null
> @@ -1,51 +0,0 @@
> -* Freescale i.MX ci13xxx usb controllers
> -
> -Required properties:
> -- compatible: Should be "fsl,imx27-usb"
> -- reg: Should contain registers location and length
> -- interrupts: Should contain controller interrupt
> -
> -Recommended properies:
> -- phy_type: the type of the phy connected to the core. Should be one
> - of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
> - property the PORTSC register won't be touched
> -- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
> -
> -Optional properties:
> -- fsl,usbphy: phandler of usb phy that connects to the only one port
> -- fsl,usbmisc: phandler of non-core register device, with one argument
> - that indicate usb controller index
> -- vbus-supply: regulator for vbus
> -- disable-over-current: disable over current detect
> -- external-vbus-divider: enables off-chip resistor divider for Vbus
> -- imx6-usb-charger-detection: enable imx6 usb charger detect function, -
> only set it when the user wants SoC usb charger detection capabilities.
> -If the user wants to use charger IC's usb charger detection capabilities,
> -please do not set it.
> -- fsl,anatop: phandle for anatop module, anatop module is only existed -
> at imx6 SoC series
> -- pinctrl-names: for names of hsic pin group
> -- pinctrl-0: hsic "idle" pin group
> -- pinctrl-1: hsic "active" pin group
> -- osc-clkgate-delay: the delay between powering up the xtal 24MHz clock
> - and release the clock to the digital logic inside the analog block,
> - 0 <= osc-clkgate-delay <= 7.
> -- maximum-speed: limit the maximum connection speed to "full-speed".
> -
> -Examples:
> -usb@02184000 { /* USB OTG */
> - compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
> - reg = <0x02184000 0x200>;
> - interrupts = <0 43 0x04>;
> - fsl,usbphy = <&usbphy1>;
> - fsl,usbmisc = <&usbmisc 0>;
> - disable-over-current;
> - external-vbus-divider;
> - imx6-usb-charger-detection;
> - fsl,anatop = <&anatop>;
> - pinctrl-names = "idle", "active";
> - pinctrl-0 = <&pinctrl_usbh2_1>;
> - pinctrl-1 = <&pinctrl_usbh2_2>;
> - osc-clkgate-delay = <0x3>;
> - maximum-speed = "full-speed";
> -};
> --
Sorry, forget it please. I cherry-pick them to freescale internal tree,
and forget to skip sob and cc in commit log.
Peter
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
