We have already renamed the file name, change doc name at this
patch.
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-doc@xxxxxxxxxxxxxxx
Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/usb/ci-hdrc-imx.txt | 51 ++++++++++++++++++++
.../devicetree/bindings/usb/ci13xxx-imx.txt | 51 --------------------
2 files changed, 51 insertions(+), 51 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
delete mode 100644 Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
new file mode 100644
index 0000000..881901a
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
@@ -0,0 +1,51 @@
+* Freescale i.MX ci13xxx usb controllers
+
+Required properties:
+- compatible: Should be "fsl,imx27-usb"
+- reg: Should contain registers location and length
+- interrupts: Should contain controller interrupt
+
+Recommended properies:
+- phy_type: the type of the phy connected to the core. Should be one
+ of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
+ property the PORTSC register won't be touched
+- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
+
+Optional properties:
+- fsl,usbphy: phandler of usb phy that connects to the only one port
+- fsl,usbmisc: phandler of non-core register device, with one argument
+ that indicate usb controller index
+- vbus-supply: regulator for vbus
+- disable-over-current: disable over current detect
+- external-vbus-divider: enables off-chip resistor divider for Vbus
+- imx6-usb-charger-detection: enable imx6 usb charger detect function,
+only set it when the user wants SoC usb charger detection capabilities.
+If the user wants to use charger IC's usb charger detection capabilities,
+please do not set it.
+- fsl,anatop: phandle for anatop module, anatop module is only existed
+at imx6 SoC series
+- pinctrl-names: for names of hsic pin group
+- pinctrl-0: hsic "idle" pin group
+- pinctrl-1: hsic "active" pin group
+- osc-clkgate-delay: the delay between powering up the xtal 24MHz clock
+ and release the clock to the digital logic inside the analog block,
+ 0 <= osc-clkgate-delay <= 7.
+- maximum-speed: limit the maximum connection speed to "full-speed".
+
+Examples:
+usb@02184000 { /* USB OTG */
+ compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+ reg = <0x02184000 0x200>;
+ interrupts = <0 43 0x04>;
+ fsl,usbphy = <&usbphy1>;
+ fsl,usbmisc = <&usbmisc 0>;
+ disable-over-current;
+ external-vbus-divider;
+ imx6-usb-charger-detection;
+ fsl,anatop = <&anatop>;
+ pinctrl-names = "idle", "active";
+ pinctrl-0 = <&pinctrl_usbh2_1>;
+ pinctrl-1 = <&pinctrl_usbh2_2>;
+ osc-clkgate-delay = <0x3>;
+ maximum-speed = "full-speed";
+};
diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
deleted file mode 100644
index 881901a..0000000
--- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* Freescale i.MX ci13xxx usb controllers
-
-Required properties:
-- compatible: Should be "fsl,imx27-usb"
-- reg: Should contain registers location and length
-- interrupts: Should contain controller interrupt
-
-Recommended properies:
-- phy_type: the type of the phy connected to the core. Should be one
- of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
- property the PORTSC register won't be touched
-- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
-
-Optional properties:
-- fsl,usbphy: phandler of usb phy that connects to the only one port
-- fsl,usbmisc: phandler of non-core register device, with one argument
- that indicate usb controller index
-- vbus-supply: regulator for vbus
-- disable-over-current: disable over current detect
-- external-vbus-divider: enables off-chip resistor divider for Vbus
-- imx6-usb-charger-detection: enable imx6 usb charger detect function,
-only set it when the user wants SoC usb charger detection capabilities.
-If the user wants to use charger IC's usb charger detection capabilities,
-please do not set it.
-- fsl,anatop: phandle for anatop module, anatop module is only existed
-at imx6 SoC series
-- pinctrl-names: for names of hsic pin group
-- pinctrl-0: hsic "idle" pin group
-- pinctrl-1: hsic "active" pin group
-- osc-clkgate-delay: the delay between powering up the xtal 24MHz clock
- and release the clock to the digital logic inside the analog block,
- 0 <= osc-clkgate-delay <= 7.
-- maximum-speed: limit the maximum connection speed to "full-speed".
-
-Examples:
-usb@02184000 { /* USB OTG */
- compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
- reg = <0x02184000 0x200>;
- interrupts = <0 43 0x04>;
- fsl,usbphy = <&usbphy1>;
- fsl,usbmisc = <&usbmisc 0>;
- disable-over-current;
- external-vbus-divider;
- imx6-usb-charger-detection;
- fsl,anatop = <&anatop>;
- pinctrl-names = "idle", "active";
- pinctrl-0 = <&pinctrl_usbh2_1>;
- pinctrl-1 = <&pinctrl_usbh2_2>;
- osc-clkgate-delay = <0x3>;
- maximum-speed = "full-speed";
-};
--
1.7.8
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
