Sebastian, Linus, I've now created mvebu/pinctrl-dove for this series. It's based on v3.14-rc1, and depends on mvebu/pinctrl (which depends on mvebu/pinctrl-3xx). I've kept this series in a separate branch in case we encounter an unforeseen problem with something in here. Then this branch can be dropped, and /pinctrl-3xx and /pinctrl will still make it in. So, all patches except 3 and 4 are in mvebu/pinctrl-dove. 3 and 4 are in mvebu/dt. thx, Jason. On Mon, Feb 24, 2014 at 09:42:52AM +0100, Sebastian Hesselbarth wrote: > This is a patches separated from one sent earlier [1] with just the > removal of any hard-coded reg addresses from Dove pinctrl stub. This > is a required step for Dove to leave mach-dove, hop into mach-mvebu, > and become part of multi_v7. > > In the meantime, support for new Armada 375/38x was added that also > contain patches for pinctrl [2]. The cleanup patches [3] split off from > the original patch set take care of pinctrl-related changes for Armada > 375/38x. Since this patch set now already depends on Armada 375/38x > pinctrl through those cleanup patches, we take care of Armada 375/38x > binding updates here, too. > > For Dove, this patch set removes all hardcoded addresses from > pinctrl-dove by either requesting additional resources or a syscon > provided regmap for global config registers. As this changes existing > driver to DT binding relationship, all additional resources are probed > in a backward compatible way. If the corresponding resource cannot be > found, we derive it from the existing pinctrl resource and warn about > the old DTB firmware. > > Patches 1-2 add or update binding documentation for dove, global config > syscon, and pinctrl-dove. Patch 2 also documents missing reg property > requirement for other mvebu pinctrl nodes, including new Armada 375/38x. > > Patch 3 and 4 add the new pinctrl reg property values and global config > register syscon to exisiting dove.dtsi. > > Patches 5-6 request either additional reg ranges or the syscon regmap > in a DT-backward compatible way. If any resource cannot be derived from > DT node, we warn about an old DTB firmware. > > Patches 7-10 finally remove any hardcoded addresses from Dove SoC > pinctrl driver and use the iomap/regmap resources instead. > > DT and binding related patches have also been sent to DT maintainers > and corresponding lists, additional pinctrl related patches have been > sent to pinctrl/mvebu maintainers and LAKML only. > > This patch set is based on v3.14-rc1 and depends on some cleanup patches > that will go into v3.15. We have a lot of stuff for v3.15 already in > mvebu, so I am okay with postponing this and/or the following dove-to- > mvebu patches for v3.16. As Jason prepares mvebu pinctrl PRs for LinusW, > it is up to him when to take it with LinusW's Acked-by. > > Nevertheless, there is an *unstable* branch based on v3.14-rc1, with > mvebu/pinctrl-3xx and mvebu/pinctrl merged in at (still named -for-3.15) > > https://github.com/shesselba/linux-dove.git unstable/dove-pinctrl-for-3.15_v1 > > [1] http://www.spinics.net/lists/arm-kernel/msg303496.html > [2] http://www.spinics.net/lists/arm-kernel/msg306409.html > [3] http://lkml.org/lkml/2014/2/23/43 > > Sebastian Hesselbarth (10): > devicetree: bindings: add missing Marvell Dove SoC documentation > devicetree: bindings: update MVEBU pinctrl binding documentation > ARM: dove: add additional pinctrl registers > ARM: dove: add global-config register node > pinctrl: mvebu: dove: request additional resources > pinctrl: mvebu: dove: request syscon regmap for global registers > pinctrl: mvebu: dove: use remapped mpp base registers > pinctrl: mvebu: dove: use remapped mpp4 register > pinctrl: mvebu: dove: use remapped pmu_mpp registers > pinctrl: mvebu: dove: use global register regmap > > .../devicetree/bindings/arm/marvell,dove.txt | 22 ++ > .../pinctrl/marvell,armada-370-pinctrl.txt | 1 + > .../pinctrl/marvell,armada-375-pinctrl.txt | 1 + > .../pinctrl/marvell,armada-38x-pinctrl.txt | 1 + > .../bindings/pinctrl/marvell,armada-xp-pinctrl.txt | 1 + > .../bindings/pinctrl/marvell,dove-pinctrl.txt | 1 + > .../bindings/pinctrl/marvell,kirkwood-pinctrl.txt | 1 + > .../bindings/pinctrl/marvell,mvebu-pinctrl.txt | 2 +- > arch/arm/boot/dts/dove.dtsi | 10 +- > drivers/pinctrl/mvebu/Kconfig | 1 + > drivers/pinctrl/mvebu/pinctrl-dove.c | 286 +++++++++++++-------- > 11 files changed, 213 insertions(+), 114 deletions(-) > create mode 100644 Documentation/devicetree/bindings/arm/marvell,dove.txt > > --- > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > Cc: Pawel Moll <pawel.moll@xxxxxxx> > Cc: Mark Rutland <mark.rutland@xxxxxxx> > Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx> > Cc: Kumar Gala <galak@xxxxxxxxxxxxxx> > Cc: Rob Landley <rob@xxxxxxxxxxx> > Cc: Linus Walleij <linus.walleij@xxxxxxxxxx> > Cc: Russell King <linux@xxxxxxxxxxxxxxxx> > Cc: Jason Cooper <jason@xxxxxxxxxxxxxx> > Cc: Andrew Lunn <andrew@xxxxxxx> > Cc: Gregory Clement <gregory.clement@xxxxxxxxxxxxxxxxxx> > Cc: devicetree@xxxxxxxxxxxxxxx > Cc: linux-doc@xxxxxxxxxxxxxxx > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > Cc: linux-kernel@xxxxxxxxxxxxxxx > -- > 1.8.5.3 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
